Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions verified
“53228” across 3 loaded brands
At least two brands share the same bore, outside diameter and width. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | FAG53228140 × 200 × 48.6 mm | NSK53228X140 × 200 × 48.6 mm | KOYO53228140 × 200 × 48.6 mm |
|---|---|---|---|
| Comparable specifications | |||
| Brand | FAG | NSK | KOYO |
| Designation | 53228 | 53228X | 53228 |
| Product family | — | Axial deep groove ball bearing | Single direction / With flat back faces |
| Detailed type | Axial deep groove ball bearings | Axial deep groove ball bearings | Axial deep groove ball bearings |
| Bore diameterd | 140 mm | 140 mm | 140 mm |
| Outside diameterD | 200 mm | 200 mm | 200 mm |
| WidthB | 48.6 mm | 48.6 mm | 48.6 mm |
| Fatigue load limitPu | — | — | 19.6 kN |
| Reference speednref | 2700 r/min | — | — |
| Limiting speednG | 2110 r/min | — | 940 r/min |
| Mass≈m | 4.241 kg | 4.74 kg | 4.35 kg |
| Precision class | PN — Normal (ISO 492:2023) | — | — |
| Cage | JP — Steel sheet metal | — | — |
| Minimum operating temperatureTmin | -30 °C | — | — |
| Maximum operating temperatureTmax | 150 °C | — | — |
| Additional information | |||
| Seat washer | U228 | — | — |
| Aligning-seat geometry | |||
| Aligning-seat geometric referenceA | — | 87 mm | — |
| Spherical seat radiusR | — | 160 mm | — |
| Assembly boundary dimensions | |||
| Shaft-washer bore diameterd | — | 140 mm | — |
| Overall outside diameterD | — | 200 mm | — |
| Complete assembled heightT3 | — | 48.6 mm | — |
| Axial load ratings | |||
| Basic dynamic axial load ratingCa | — | 186000 N | — |
| Basic static axial load ratingC0a | — | 575000 N | — |
| Calculation factors | |||
| Minimum load factorA | 1.9 | — | — |
| Capabilities & suitability | |||
| Axial load capacity in one direction | Yes | — | — |
| Suitable for grease lubrication | Yes | — | — |
| Suitable for oil lubrication | Yes | — | — |
| Unsealed design | Yes | — | — |
| Staticangularerrorandmisalignment | Yes | — | — |
| Chamfers | |||
| Minimum housing-side chamferr min. | — | 1.5 mm | — |
| Classification | |||
| Official Category Path | — | — | Thrust ball bearings - Single direction - With flat back faces |
| Official Classification 1 | — | — | Thrust ball bearings / Single direction / With flat back faces |
| Component dimensions | |||
| Shaft washer outside diameterd1 | — | 197 mm | — |
| Housing washer bore diameterD1 | — | 143 mm | — |
| Construction | |||
| Axial load directions | — | One direction | — |
| Seat construction | — | Aligning seat | — |
| Radial-load support | — | Not suitable for radial load; separate radial support required | — |
| Dimensions | |||
| Minimum chamfer dimensionrmin | 1.5 mm | — | — |
| Minimum chamfer dimensionrmin | 0.059 in | — | — |
| Inner diameter housing washerD1 | 143 mm | — | — |
| Inner diameter housing washerD1 | 5.63 in | — | — |
| Outer diameter shaft washerd1 | 197 mm | — | — |
| Outer diameter shaft washerd1 | 7.756 in | — | — |
| Radius spherical housing washerR | 160 mm | — | — |
| Radius spherical housing washerR | 6.299 in | — | — |
| Distance of the center pointA | 87 mm | — | — |
| Distance of the center pointA | 3.425 in | — | — |
| Height with seat washerT1 | 55 mm | — | — |
| Height with seat washerT1 | 2.165 in | — | — |
| Bore diameter seat washerD2 | 170 mm | — | — |
| Bore diameter seat washerD2 | 6.693 in | — | — |
| Outside diameter seat washerD3 | 210 mm | — | — |
| Outside diameter seat washerD3 | 8.268 in | — | — |
| Height seat washerC | 17 mm | — | — |
| Height seat washerC | 0.669 in | — | — |
| Lubrication-qualified speed | |||
| Limiting speed — grease | — | 1000 r/min | — |
| Limiting speed — oil | — | 1500 r/min | — |
| Main Dimensions & Performance Data | |||
| Inner diameter shaft washerd | 140 mm | — | — |
| Inner diameter shaft washerd | 5.512 in | — | — |
| Outer diameter housing washerD | 200 mm | — | — |
| Outer diameter housing washerD | 7.874 in | — | — |
| Basic dynamic load rating, axialCa | 191,000 N | — | — |
| Basic dynamic load rating, axialCa | 42,940.647 lbf | — | — |
| Basic static load rating, axialC0a | 570,000 N | — | — |
| Basic static load rating, axialC0a | 128,147.482 lbf | — | — |
| Fatigue load limit, axialCua | 19,800 N | — | — |
| Fatigue load limit, axialCua | 4,451.439 lbf | — | — |
| Manufacturer Identity | |||
| Schaeffler Product Code | 394746 | — | — |
| Official Class Key | — | — | 070-010-000 |
| Base Type | 53228 | — | — |
| Gpsd Group | S03 | — | — |
| Product Line Id | 14 | — | — |
| SAP material number | 0190704030000 | — | — |
| Base product | 2305100101 | — | — |
| Bearing X designation | 53228 | — | — |
| Mounting Manager ID | 53228 | — | — |
| Grease application ID | 53228 | — | — |
| Mass reference | |||
| Approximate assembly mass | — | 4.74 kg | — |
| Mounting dimensions | |||
| Minimum shaft abutment diameterda min. | — | 176 mm | — |
| Maximum housing abutment diameterDa max. | — | 164 mm | — |
| Maximum housing-side fillet radiusra max. | — | 1.5 mm | — |
| Minimum diameter shaft shoulderda min | 176 mm | — | — |
| Minimum diameter shaft shoulderda min | 6.929 in | — | — |
| Maximum diameter of housing shoulderDa max | 170 mm | — | — |
| Maximum diameter of housing shoulderDa max | 6.693 in | — | — |
| Maximum filled radiusra max | 1.5 mm | — | — |
| Maximum filled radiusra max | 0.059 in | — | — |
| Product characteristics | |||
| Tolerance classPN | Normal (ISO 492:2023) | — | — |
| Dimensional / heat stabilizationS0 | Rings dimensional stabilized up to 150° | — | — |
| Product Identity | |||
| Construction | Axial deep groove ball bearing 532, single direction, with spherical housing washer, steel sheet metal cage | — | — |
| Short Description | Axial deep groove ball bearing | — | — |
| Technical Data | |||
| d | — | — | 200 mm |
| T | — | — | 48.6 mm |
| Bore Diameter (D) | 140 mm | — | — |
| R(Min.) | — | — | 1.5 mm |
| Outside Diameter (D) | 200 mm | — | — |
| Basic Load Ratings Ca | — | — | 234 kN |
| Width (B) | 48.6 mm | — | — |
| Basic Load Ratings C0A | — | — | 650 kN |
| Basic Dynamic Load Rating, Axial (Ca) | 191,000 N | — | — |
| Fatigue Load Limit : Cu | — | — | 19.6 kN |
| Basic Static Load Rating, Axial (C0A) | 570,000 N | — | — |
| Limiting Speeds(Grease Lub.) | — | — | 940 min-1 |
| Operating Temperature Min. (Tmin) | -30 °C | — | — |
| Limiting Speeds(Oil Lub.) | — | — | 1450 min-1 |
| Limiting Speed (Ng) | 2,110 1/min | — | — |
| D1(Max.) | — | — | 197 mm |
| Operating Temperature Max. (Tmax) | 150 °C | — | — |
| D1(Min.) | — | — | 143 mm |
| Reference Speed (Nϑr) | 2,700 1/min | — | — |
| D2 | — | — | - mm |
| Bore Diameter Seat Washer (D2) | 170 mm | — | — |
| D3 | — | — | - mm |
| Height Seat Washer (C) | 17 mm | — | — |
| A | — | — | 87 mm |
| Minimum Diameter Shaft Shoulder (Da Min) | 176 mm | — | — |
| R | — | — | 160 mm |
| Minimum Load Factor (A) | 1.9 | — | — |
| C | — | — | - mm |
| Outside Diameter Seat Washer (D3) | 210 mm | — | — |
| Da(Min.) | — | — | 176 mm |
| Rip Diameter Shaft Washer (D1) | 197 mm | — | — |
| Da(Max.) | — | — | 164 mm |
| Distance Of The Center Point (A) | 87 mm | — | — |
| Ra(Max.) | — | — | 1.5 mm |
| Bore Diameter Housing Washer (D1) | 143 mm | — | — |
| Mass(Refer.) | — | — | 4.35 kg |
| Maximum Diameter Of Housing Shoulder (Da Max) | 170 mm | — | — |
| Minimum Chamfer Dimension (Rmin) | 1.5 mm | — | — |
| Height With Seat Washer (T1) | 55 mm | — | — |
| Maximum Fillet Radius (Ra Max) | 1.5 mm | — | — |
| Radius Spherical Housing Washer (R) | 160 mm | — | — |
| Fatigue Load Limit, Axial (Cua) | 19,800 N | — | — |
| Temperature range | |||
| Operating temperature min.Tmin | -30 °C | — | — |
| Operating temperature min.Tmin | -22 °F | — | — |
| Operating temperature max.Tmax | 150 °C | — | — |
| Operating temperature max.Tmax | 302 °F | — | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.