Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions verified
“53222” across 3 loaded brands
At least two brands share the same bore, outside diameter and width. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | FAG53222110 × 160 × 40.2 mm | NSK53222110 × 160 × 40.2 mm | KOYO53222110 × 160 × 40.2 mm |
|---|---|---|---|
| Comparable specifications | |||
| Brand | FAG | NSK | KOYO |
| Designation | 53222 | 53222 | 53222 |
| Product family | — | Axial deep groove ball bearing | Single direction / With flat back faces |
| Detailed type | Axial deep groove ball bearings | Axial deep groove ball bearings | Axial deep groove ball bearings |
| Bore diameterd | 110 mm | 110 mm | 110 mm |
| Outside diameterD | 160 mm | 160 mm | 160 mm |
| WidthB | 40.2 mm | 40.2 mm | 40.2 mm |
| Fatigue load limitPu | — | — | 17.6 kN |
| Reference speednref | 3250 r/min | — | — |
| Limiting speednG | 2650 r/min | — | 1200 r/min |
| Mass≈m | 2.315 kg | 2.65 kg | 2.5 kg |
| Precision class | PN — Normal (ISO 492:2023) | — | — |
| Cage | JP — Steel sheet metal | — | — |
| Minimum operating temperatureTmin | -30 °C | — | — |
| Maximum operating temperatureTmax | 150 °C | — | — |
| Additional information | |||
| Seat washer | U222 | — | — |
| Aligning-seat geometry | |||
| Aligning-seat geometric referenceA | — | 65 mm | — |
| Spherical seat radiusR | — | 125 mm | — |
| Assembly boundary dimensions | |||
| Shaft-washer bore diameterd | — | 110 mm | — |
| Overall outside diameterD | — | 160 mm | — |
| Complete assembled heightT3 | — | 40.2 mm | — |
| Axial load ratings | |||
| Basic dynamic axial load ratingCa | — | 136000 N | — |
| Basic static axial load ratingC0a | — | 395000 N | — |
| Calculation factors | |||
| Minimum load factorA | 0.83 | — | — |
| Capabilities & suitability | |||
| Axial load capacity in one direction | Yes | — | — |
| Suitable for grease lubrication | Yes | — | — |
| Suitable for oil lubrication | Yes | — | — |
| Unsealed design | Yes | — | — |
| Staticangularerrorandmisalignment | Yes | — | — |
| Chamfers | |||
| Minimum housing-side chamferr min. | — | 1.1 mm | — |
| Classification | |||
| Official Category Path | — | — | Thrust ball bearings - Single direction - With flat back faces |
| Official Classification 1 | — | — | Thrust ball bearings / Single direction / With flat back faces |
| Component dimensions | |||
| Shaft washer outside diameterd1 | — | 160 mm | — |
| Housing washer bore diameterD1 | — | 113 mm | — |
| Construction | |||
| Axial load directions | — | One direction | — |
| Seat construction | — | Aligning seat | — |
| Radial-load support | — | Not suitable for radial load; separate radial support required | — |
| Dimensions | |||
| Minimum chamfer dimensionrmin | 1.1 mm | — | — |
| Minimum chamfer dimensionrmin | 0.043 in | — | — |
| Inner diameter housing washerD1 | 113 mm | — | — |
| Inner diameter housing washerD1 | 4.449 in | — | — |
| Outer diameter shaft washerd1 | 160 mm | — | — |
| Outer diameter shaft washerd1 | 6.299 in | — | — |
| Radius spherical housing washerR | 125 mm | — | — |
| Radius spherical housing washerR | 4.921 in | — | — |
| Distance of the center pointA | 65 mm | — | — |
| Distance of the center pointA | 2.559 in | — | — |
| Height with seat washerT1 | 45 mm | — | — |
| Height with seat washerT1 | 1.772 in | — | — |
| Bore diameter seat washerD2 | 135 mm | — | — |
| Bore diameter seat washerD2 | 5.315 in | — | — |
| Outside diameter seat washerD3 | 165 mm | — | — |
| Outside diameter seat washerD3 | 6.496 in | — | — |
| Height seat washerC | 14 mm | — | — |
| Height seat washerC | 0.551 in | — | — |
| Lubrication-qualified speed | |||
| Limiting speed — grease | — | 1300 r/min | — |
| Limiting speed — oil | — | 1900 r/min | — |
| Main Dimensions & Performance Data | |||
| Inner diameter shaft washerd | 110 mm | — | — |
| Inner diameter shaft washerd | 4.331 in | — | — |
| Outer diameter housing washerD | 160 mm | — | — |
| Outer diameter housing washerD | 6.299 in | — | — |
| Basic dynamic load rating, axialCa | 126,000 N | — | — |
| Basic dynamic load rating, axialCa | 28,327.338 lbf | — | — |
| Basic static load rating, axialC0a | 365,000 N | — | — |
| Basic static load rating, axialC0a | 82,059.353 lbf | — | — |
| Fatigue load limit, axialCua | 14,400 N | — | — |
| Fatigue load limit, axialCua | 3,237.41 lbf | — | — |
| Manufacturer Identity | |||
| Schaeffler Product Code | 394740 | — | — |
| Official Class Key | — | — | 070-010-000 |
| Base Type | 53222 | — | — |
| Gpsd Group | S03 | — | — |
| Product Line Id | 14 | — | — |
| X Life Marking | n.r. | — | — |
| SAP material number | 0190703810000 | — | — |
| Base product | 2305100101 | — | — |
| Bearing X designation | 53222 | — | — |
| Mounting Manager ID | 53222 | — | — |
| Grease application ID | 53222 | — | — |
| Mass reference | |||
| Approximate assembly mass | — | 2.65 kg | — |
| Mounting dimensions | |||
| Minimum shaft abutment diameterda min. | — | 140 mm | — |
| Maximum housing abutment diameterDa max. | — | 130 mm | — |
| Maximum housing-side fillet radiusra max. | — | 1 mm | — |
| Minimum diameter shaft shoulderda min | 140 mm | — | — |
| Minimum diameter shaft shoulderda min | 5.512 in | — | — |
| Maximum diameter of housing shoulderDa max | 135 mm | — | — |
| Maximum diameter of housing shoulderDa max | 5.315 in | — | — |
| Maximum filled radiusra max | 1 mm | — | — |
| Maximum filled radiusra max | 0.039 in | — | — |
| Product characteristics | |||
| Tolerance classPN | Normal (ISO 492:2023) | — | — |
| Dimensional / heat stabilizationS0 | Rings dimensional stabilized up to 150° | — | — |
| Product Identity | |||
| Construction | Axial deep groove ball bearing 532, single direction, with spherical housing washer, steel sheet metal cage | — | — |
| Short Description | Axial deep groove ball bearing | — | — |
| Technical Data | |||
| d | — | — | 160 mm |
| T | — | — | 40.2 mm |
| R(Min.) | — | — | 1.1 mm |
| Bore Diameter (D) | 110 mm | — | — |
| Basic Load Ratings Ca | — | — | 191 kN |
| Outside Diameter (D) | 160 mm | — | — |
| Basic Load Ratings C0A | — | — | 450 kN |
| Width (B) | 40.2 mm | — | — |
| Fatigue Load Limit : Cu | — | — | 17.6 kN |
| Basic Dynamic Load Rating, Axial (Ca) | 126,000 N | — | — |
| Limiting Speeds(Grease Lub.) | — | — | 1200 min-1 |
| Basic Static Load Rating, Axial (C0A) | 365,000 N | — | — |
| Limiting Speeds(Oil Lub.) | — | — | 1800 min-1 |
| Operating Temperature Min. (Tmin) | -30 °C | — | — |
| D1(Max.) | — | — | 160 mm |
| Limiting Speed (Ng) | 2,650 1/min | — | — |
| D1(Min.) | — | — | 113 mm |
| Operating Temperature Max. (Tmax) | 150 °C | — | — |
| D2 | — | — | - mm |
| Reference Speed (Nϑr) | 3,250 1/min | — | — |
| D3 | — | — | - mm |
| Bore Diameter Seat Washer (D2) | 135 mm | — | — |
| A | — | — | 65 mm |
| Height Seat Washer (C) | 14 mm | — | — |
| R | — | — | 125 mm |
| Minimum Diameter Shaft Shoulder (Da Min) | 140 mm | — | — |
| C | — | — | - mm |
| Minimum Load Factor (A) | 0.83 | — | — |
| Da(Min.) | — | — | 140 mm |
| Outside Diameter Seat Washer (D3) | 165 mm | — | — |
| Da(Max.) | — | — | 130 mm |
| Rip Diameter Shaft Washer (D1) | 160 mm | — | — |
| Ra(Max.) | — | — | 1 mm |
| Distance Of The Center Point (A) | 65 mm | — | — |
| Mass(Refer.) | — | — | 2.5 kg |
| Bore Diameter Housing Washer (D1) | 113 mm | — | — |
| Maximum Diameter Of Housing Shoulder (Da Max) | 135 mm | — | — |
| Minimum Chamfer Dimension (Rmin) | 1.1 mm | — | — |
| Height With Seat Washer (T1) | 45 mm | — | — |
| Maximum Fillet Radius (Ra Max) | 1 mm | — | — |
| Radius Spherical Housing Washer (R) | 125 mm | — | — |
| Fatigue Load Limit, Axial (Cua) | 14,400 N | — | — |
| Temperature range | |||
| Operating temperature min.Tmin | -30 °C | — | — |
| Operating temperature min.Tmin | -22 °F | — | — |
| Operating temperature max.Tmax | 150 °C | — | — |
| Operating temperature max.Tmax | 302 °F | — | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.