Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Cross Reference centre · Interchange verification checklist · Understand suffix differences
You entered 53220U. This table explores the base group 53220; it does not preserve or approve every requested suffix. Search your complete marking first →
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions verified
“53220” across 3 loaded brands
At least two brands share the same bore, outside diameter and width. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | FAG53220100 × 150 × 40.9 mm | NSK53220100 × 150 × 40.9 mm | KOYO53220100 × 150 × 40.9 mm |
|---|---|---|---|
| Comparable specifications | |||
| Brand | FAG | NSK | KOYO |
| Designation | 53220 | 53220 | 53220 |
| Product family | — | Axial deep groove ball bearing | Single direction / With flat back faces |
| Detailed type | Axial deep groove ball bearings | Axial deep groove ball bearings | Axial deep groove ball bearings |
| Bore diameterd | 100 mm | 100 mm | 100 mm |
| Outside diameterD | 150 mm | 150 mm | 150 mm |
| WidthB | 40.9 mm | 40.9 mm | 40.9 mm |
| Fatigue load limitPu | — | — | 16.6 kN |
| Reference speednref | 3600 r/min | — | — |
| Limiting speednG | 2700 r/min | — | 1200 r/min |
| Mass≈m | 2.228 kg | 2.49 kg | 2.34 kg |
| Precision class | PN — Normal (ISO 492:2023) | — | — |
| Cage | JP — Steel sheet metal | — | — |
| Minimum operating temperatureTmin | -30 °C | — | — |
| Maximum operating temperatureTmax | 150 °C | — | — |
| Additional information | |||
| Seat washer | U220 | — | — |
| Aligning-seat geometry | |||
| Aligning-seat geometric referenceA | — | 52 mm | — |
| Spherical seat radiusR | — | 112 mm | — |
| Assembly boundary dimensions | |||
| Shaft-washer bore diameterd | — | 100 mm | — |
| Overall outside diameterD | — | 150 mm | — |
| Complete assembled heightT3 | — | 40.9 mm | — |
| Axial load ratings | |||
| Basic dynamic axial load ratingCa | — | 135000 N | — |
| Basic static axial load ratingC0a | — | 375000 N | — |
| Calculation factors | |||
| Minimum load factorA | 0.68 | — | — |
| Capabilities & suitability | |||
| Axial load capacity in one direction | Yes | — | — |
| Suitable for grease lubrication | Yes | — | — |
| Suitable for oil lubrication | Yes | — | — |
| Unsealed design | Yes | — | — |
| Staticangularerrorandmisalignment | Yes | — | — |
| Chamfers | |||
| Minimum housing-side chamferr min. | — | 1.1 mm | — |
| Classification | |||
| Official Category Path | — | — | Thrust ball bearings - Single direction - With flat back faces |
| Official Classification 1 | — | — | Thrust ball bearings / Single direction / With flat back faces |
| Component dimensions | |||
| Shaft washer outside diameterd1 | — | 150 mm | — |
| Housing washer bore diameterD1 | — | 103 mm | — |
| Construction | |||
| Axial load directions | — | One direction | — |
| Seat construction | — | Aligning seat | — |
| Radial-load support | — | Not suitable for radial load; separate radial support required | — |
| Dimensions | |||
| Minimum chamfer dimensionrmin | 1.1 mm | — | — |
| Minimum chamfer dimensionrmin | 0.043 in | — | — |
| Inner diameter housing washerD1 | 103 mm | — | — |
| Inner diameter housing washerD1 | 4.055 in | — | — |
| Outer diameter shaft washerd1 | 150 mm | — | — |
| Outer diameter shaft washerd1 | 5.906 in | — | — |
| Radius spherical housing washerR | 112 mm | — | — |
| Radius spherical housing washerR | 4.409 in | — | — |
| Distance of the center pointA | 52 mm | — | — |
| Distance of the center pointA | 2.047 in | — | — |
| Height with seat washerT1 | 45 mm | — | — |
| Height with seat washerT1 | 1.772 in | — | — |
| Bore diameter seat washerD2 | 125 mm | — | — |
| Bore diameter seat washerD2 | 4.921 in | — | — |
| Outside diameter seat washerD3 | 155 mm | — | — |
| Outside diameter seat washerD3 | 6.102 in | — | — |
| Height seat washerC | 14 mm | — | — |
| Height seat washerC | 0.551 in | — | — |
| Lubrication-qualified speed | |||
| Limiting speed — grease | — | 1300 r/min | — |
| Limiting speed — oil | — | 2000 r/min | — |
| Main Dimensions & Performance Data | |||
| Inner diameter shaft washerd | 100 mm | — | — |
| Inner diameter shaft washerd | 3.937 in | — | — |
| Outer diameter housing washerD | 150 mm | — | — |
| Outer diameter housing washerD | 5.906 in | — | — |
| Basic dynamic load rating, axialCa | 119,000 N | — | — |
| Basic dynamic load rating, axialCa | 26,753.597 lbf | — | — |
| Basic static load rating, axialC0a | 325,000 N | — | — |
| Basic static load rating, axialC0a | 73,066.547 lbf | — | — |
| Fatigue load limit, axialCua | 13,300 N | — | — |
| Fatigue load limit, axialCua | 2,990.108 lbf | — | — |
| Manufacturer Identity | |||
| Schaeffler Product Code | 394738 | — | — |
| Official Class Key | — | — | 070-010-000 |
| Base Type | 53220 | — | — |
| Gpsd Group | S03 | — | — |
| Product Line Id | 14 | — | — |
| X Life Marking | n.r. | — | — |
| SAP material number | 0190071160000 | — | — |
| Base product | 2305100101 | — | — |
| Bearing X designation | 53220 | — | — |
| Mounting Manager ID | 53220 | — | — |
| Grease application ID | 53220 | — | — |
| Mass reference | |||
| Approximate assembly mass | — | 2.49 kg | — |
| Mounting dimensions | |||
| Minimum shaft abutment diameterda min. | — | 130 mm | — |
| Maximum housing abutment diameterDa max. | — | 120 mm | — |
| Maximum housing-side fillet radiusra max. | — | 1 mm | — |
| Minimum diameter shaft shoulderda min | 130 mm | — | — |
| Minimum diameter shaft shoulderda min | 5.118 in | — | — |
| Maximum diameter of housing shoulderDa max | 125 mm | — | — |
| Maximum diameter of housing shoulderDa max | 4.921 in | — | — |
| Maximum filled radiusra max | 1 mm | — | — |
| Maximum filled radiusra max | 0.039 in | — | — |
| Product characteristics | |||
| Tolerance classPN | Normal (ISO 492:2023) | — | — |
| Dimensional / heat stabilizationS0 | Rings dimensional stabilized up to 150° | — | — |
| Product Identity | |||
| Construction | Axial deep groove ball bearing 532, single direction, with spherical housing washer, steel sheet metal cage | — | — |
| Short Description | Axial deep groove ball bearing | — | — |
| Technical Data | |||
| d | — | — | 150 mm |
| T | — | — | 40.9 mm |
| R(Min.) | — | — | 1.1 mm |
| Bore Diameter (D) | 100 mm | — | — |
| Basic Load Ratings Ca | — | — | 183 kN |
| Outside Diameter (D) | 150 mm | — | — |
| Basic Load Ratings C0A | — | — | 410 kN |
| Width (B) | 40.9 mm | — | — |
| Fatigue Load Limit : Cu | — | — | 16.6 kN |
| Basic Dynamic Load Rating, Axial (Ca) | 119,000 N | — | — |
| Limiting Speeds(Grease Lub.) | — | — | 1200 min-1 |
| Basic Static Load Rating, Axial (C0A) | 325,000 N | — | — |
| Limiting Speeds(Oil Lub.) | — | — | 1900 min-1 |
| Operating Temperature Min. (Tmin) | -30 °C | — | — |
| D1(Max.) | — | — | 150 mm |
| Limiting Speed (Ng) | 2,700 1/min | — | — |
| D1(Min.) | — | — | 103 mm |
| Operating Temperature Max. (Tmax) | 150 °C | — | — |
| D2 | — | — | - mm |
| Reference Speed (Nϑr) | 3,600 1/min | — | — |
| D3 | — | — | - mm |
| Bore Diameter Seat Washer (D2) | 125 mm | — | — |
| A | — | — | 52 mm |
| Height Seat Washer (C) | 14 mm | — | — |
| R | — | — | 112 mm |
| Minimum Diameter Shaft Shoulder (Da Min) | 130 mm | — | — |
| C | — | — | - mm |
| Minimum Load Factor (A) | 0.68 | — | — |
| Da(Min.) | — | — | 130 mm |
| Outside Diameter Seat Washer (D3) | 155 mm | — | — |
| Da(Max.) | — | — | 120 mm |
| Rip Diameter Shaft Washer (D1) | 150 mm | — | — |
| Ra(Max.) | — | — | 1 mm |
| Distance Of The Center Point (A) | 52 mm | — | — |
| Mass(Refer.) | — | — | 2.34 kg |
| Bore Diameter Housing Washer (D1) | 103 mm | — | — |
| Maximum Diameter Of Housing Shoulder (Da Max) | 125 mm | — | — |
| Minimum Chamfer Dimension (Rmin) | 1.1 mm | — | — |
| Height With Seat Washer (T1) | 45 mm | — | — |
| Maximum Fillet Radius (Ra Max) | 1 mm | — | — |
| Radius Spherical Housing Washer (R) | 112 mm | — | — |
| Fatigue Load Limit, Axial (Cua) | 13,300 N | — | — |
| Temperature range | |||
| Operating temperature min.Tmin | -30 °C | — | — |
| Operating temperature min.Tmin | -22 °F | — | — |
| Operating temperature max.Tmax | 150 °C | — | — |
| Operating temperature max.Tmax | 302 °F | — | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.