Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Cross Reference centre · Interchange verification checklist · Understand suffix differences
You entered 52338-MP. This table explores the base group 52338; it does not preserve or approve every requested suffix. Search your complete marking first →
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Designation candidates
“52338” across 2 loaded brands
One highest-ranked designation candidate is shown per manufacturer. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | FAG52338-MP160 × 320 × 183 mm | NSK52338X160 × 320 × 183 mm |
|---|---|---|
| Comparable specifications | ||
| Brand | FAG | NSK |
| Designation | 52338-MP | 52338X |
| Product family | — | Axial deep groove ball bearing |
| Detailed type | Axial deep groove ball bearings | Axial deep groove ball bearings |
| Series | 52338 | — |
| Bore diameterd | 160 mm | 160 mm |
| Outside diameterD | 320 mm | 320 mm |
| WidthB | 183 mm | 183 mm |
| Reference speednref | 1770 r/min | — |
| Limiting speednG | 1040 r/min | — |
| Mass≈m | 66.4 kg | 113 kg |
| Precision class | PN — Normal (ISO 492:2023) | — |
| Cage | MP — Solid brass cage, rolling element guided | — |
| Minimum operating temperatureTmin | -30 °C | — |
| Maximum operating temperatureTmax | 200 °C | — |
| Assembly boundary dimensions | ||
| Shaft-washer bore diameterd2 | — | 160 mm |
| Overall outside diameterD | — | 320 mm |
| Complete assembled heightT1 | — | 183 mm |
| Axial load ratings | ||
| Basic dynamic axial load ratingCa | — | 550000 N |
| Basic static axial load ratingC0a | — | 1960000 N |
| Calculation factors | ||
| Minimum load factorA | 24 | — |
| Capabilities & suitability | ||
| Axial load capacity in one direction | Yes | — |
| Axial load capacity in both directions | Yes | — |
| Suitable for grease lubrication | Yes | — |
| Suitable for oil lubrication | Yes | — |
| Unsealed design | Yes | — |
| Largebearing | Yes | — |
| Chamfers | ||
| Minimum housing-side chamferr min. | — | 4 mm |
| Minimum shaft-side chamferr1 min. | — | 2 mm |
| Component dimensions | ||
| Central shaft washer outside diameterd3 | — | 319 mm |
| Housing washer bore diameterD1 | — | 195 mm |
| Adjacent shaft diameter shown in the catalogue drawing — not the bored | — | 190 mm |
| Central shaft washer thicknessB | — | 40 mm |
| Partial axial height in the assembly drawingT2 | — | 111.5 mm |
| Construction | ||
| Axial load directions | — | Both directions |
| Seat construction | — | Flat seat |
| Radial-load support | — | Not suitable for radial load; separate radial support required |
| Dimensions | ||
| Inner diameter housing washerD1 | 195 mm | — |
| Inner diameter housing washerD1 | 7.677 in | — |
| Height shaft washerB | 40 mm | — |
| Height shaft washerB | 1.575 in | — |
| Minimum chamfer dimensionrmin | 4 mm | — |
| Minimum chamfer dimensionrmin | 0.157 in | — |
| Minimum chamfer dimensionr1 min | 2 mm | — |
| Minimum chamfer dimensionr1 min | 0.079 in | — |
| Lubrication-qualified speed | ||
| Limiting speed — grease | — | 480 r/min |
| Limiting speed — oil | — | 710 r/min |
| Main Dimensions & Performance Data | ||
| Inner diameter shaft washerd | 160 mm | — |
| Inner diameter shaft washerd | 6.299 in | — |
| Outer diameter housing washerD | 320 mm | — |
| Outer diameter housing washerD | 12.598 in | — |
| Basic dynamic load rating, axialCa | 590,000 N | — |
| Basic dynamic load rating, axialCa | 132,643.885 lbf | — |
| Basic static load rating, axialC0a | 2,170,000 N | — |
| Basic static load rating, axialC0a | 487,859.712 lbf | — |
| Fatigue load limit, axialCua | 63,000 N | — |
| Fatigue load limit, axialCua | 14,163.669 lbf | — |
| Manufacturer Identity | ||
| Schaeffler Product Code | 1750376 | — |
| Base Type | 52338 | — |
| Product Line Id | 14 | — |
| X Life Marking | n.r. | — |
| Base product | 2305100102 | — |
| Bearing X designation | 52338-MP | — |
| Mounting Manager ID | 52338-MP | — |
| Grease application ID | 52338-MP | — |
| Mass reference | ||
| Approximate assembly mass | — | 113 kg |
| Mounting dimensions | ||
| Maximum housing abutment diameterDa max. | — | 244 mm |
| Maximum housing-side fillet radiusra max. | — | 3 mm |
| Maximum shaft-side fillet radiusrb max. | — | 2 mm |
| Maximum diameter shaft shoulderda max | 190 mm | — |
| Maximum diameter shaft shoulderda max | 7.48 in | — |
| Maximum diameter of housing shoulderDa max | 242 mm | — |
| Maximum diameter of housing shoulderDa max | 9.528 in | — |
| Maximum filled radiusra max | 3 mm | — |
| Maximum filled radiusra max | 0.118 in | — |
| Maximum filled radiusra1 max | 2 mm | — |
| Maximum filled radiusra1 max | 0.079 in | — |
| Product characteristics | ||
| Tolerance classPN | Normal (ISO 492:2023) | — |
| Product Identity | ||
| Construction | Axial deep groove ball bearing 523..-MP, double direction, solid brass cage | — |
| Short Description | Axial deep groove ball bearing | — |
| Technical Data | ||
| Inner Diameter Shaft Washer (D) | 160 mm | — |
| Outside Diameter (D) | 320 mm | — |
| Height (T2) | 183 mm | — |
| Basic Dynamic Load Rating, Axial (Ca) | 590,000 N | — |
| Basic Static Load Rating, Axial (C0A) | 2,170,000 N | — |
| Operating Temperature Min. (Tmin) | -30 °C | — |
| Limiting Speed (Ng) | 1,040 1/min | — |
| Operating Temperature Max. (Tmax) | 200 °C | — |
| Reference Speed (Nϑr) | 1,770 1/min | — |
| Height Shaft Washer (B) | 40 mm | — |
| Maximum Diameter Of Shaft Shoulder (Da Max) | 190 mm | — |
| Minimum Load Factor (A) | 24 | — |
| Bore Diameter Housing Washer (D1) | 195 mm | — |
| Maximum Diameter Of Housing Shoulder (Da Max) | 242 mm | — |
| Minimum Chamfer Dimension (Rmin) | 4 mm | — |
| Maximum Fillet Radius (Ra Max) | 3 mm | — |
| Maximum Recess Radius (Ra1 Max) | 2 mm | — |
| Minimum Chamfer Dimension (R1 Min) | 2 mm | — |
| Fatigue Load Limit, Axial (Cua) | 63,000 N | — |
| Temperature range | ||
| Operating temperature min.Tmin | -30 °C | — |
| Operating temperature min.Tmin | -22 °F | — |
| Operating temperature max.Tmax | 200 °C | — |
| Operating temperature max.Tmax | 392 °F | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.