Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Cross Reference centre · Interchange verification checklist · Understand suffix differences
You entered 52234-M. This table explores the base group 52234; it does not preserve or approve every requested suffix. Search your complete marking first →
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Data incomplete
“52234” across 3 loaded brands
The base designation is shared, but too few brands have complete boundary dimensions. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | SKF52234 M150 × 240 × mm | FAG52234-MP150 × 240 × 97 mm | NSK52234X150 × 240 × 97 mm |
|---|---|---|---|
| Comparable specifications | |||
| Brand | SKF | FAG | NSK |
| Designation | 52234 M | 52234-MP | 52234X |
| Product family | Thrust ball bearings | — | Axial deep groove ball bearing |
| Detailed type | Double direction thrust ball bearing | Axial deep groove ball bearings | Axial deep groove ball bearings |
| Series | — | 52234 | — |
| Bore diameterd | 150 mm | 150 mm | 150 mm |
| Outside diameterD | 240 mm | 240 mm | 240 mm |
| WidthB | — | 97 mm | 97 mm |
| HeightH | 97 mm | — | — |
| Basic dynamic load ratingC | 281 kN | — | — |
| Basic static load ratingC0 | 980 kN | — | — |
| Fatigue load limitPu | 25 kN | — | — |
| Reference speednref | 850 r/min | 2210 r/min | — |
| Limiting speednG | 1200 r/min | 1740 r/min | — |
| Mass≈m | 15.2 kg | 14.738 kg | 13.6 kg |
| Precision class | — | PN — Normal (ISO 492:2023) | — |
| Cage | Machined brass | MP — Solid brass cage, rolling element guided | — |
| Bearing material | Bearing steel | — | — |
| Minimum operating temperatureTmin | — | -30 °C | — |
| Maximum operating temperatureTmax | — | 150 °C | — |
| Assembly boundary dimensions | |||
| Shaft-washer bore diameterd2 | — | — | 150 mm |
| Overall outside diameterD | — | — | 240 mm |
| Complete assembled heightT1 | — | — | 97 mm |
| Axial load ratings | |||
| Basic dynamic axial load ratingCa | — | — | 280000 N |
| Basic static axial load ratingC0a | — | — | 915000 N |
| Calculation factors | |||
| Minimum load factorA | 5.4 | 4.5 | — |
| Capabilities & suitability | |||
| Axial load capacity in one direction | — | Yes | — |
| Axial load capacity in both directions | — | Yes | — |
| Suitable for grease lubrication | — | Yes | — |
| Suitable for oil lubrication | — | Yes | — |
| Unsealed design | — | Yes | — |
| Chamfers | |||
| Minimum housing-side chamferr min. | — | — | 1.5 mm |
| Minimum shaft-side chamferr1 min. | — | — | 1.1 mm |
| Component dimensions | |||
| Central shaft washer outside diameterd3 | — | — | 239.5 mm |
| Housing washer bore diameterD1 | — | — | 173 mm |
| Adjacent shaft diameter shown in the catalogue drawing — not the bored | — | — | 170 mm |
| Central shaft washer thicknessB | — | — | 21 mm |
| Partial axial height in the assembly drawingT2 | — | — | 59 mm |
| Construction | |||
| Axial load directions | — | — | Both directions |
| Seat construction | — | — | Flat seat |
| Radial-load support | — | — | Not suitable for radial load; separate radial support required |
| Dimensions | |||
| Inner diameter housing washerD1 | — | 173 mm | — |
| Inner diameter housing washerD1 | — | 6.811 in | — |
| Height shaft washerB | 21 mm | 21 mm | — |
| Height shaft washerB | — | 0.827 in | — |
| Minimum chamfer dimensionrmin | — | 1.5 mm | — |
| Minimum chamfer dimensionrmin | — | 0.059 in | — |
| Minimum chamfer dimensionr1 min | — | 1.1 mm | — |
| Minimum chamfer dimensionr1 min | — | 0.043 in | — |
| Engineering — Abutment dimensions | |||
| Abutment diameter shaftd a | 170 mm | — | — |
| Abutment diameter housingD a | max. 198 mm | — | — |
| Fillet radius housingr a | max. 1.5 mm | — | — |
| Fillet radius shaftr b | max. 1 mm | — | — |
| Engineering — Dimensions | |||
| Inner diameter housing washerD 1 | ≈ 173 mm | — | — |
| Chamfer dimension housing washerr 1,2 | min. 1.5 mm | — | — |
| Chamfer dimension shaft washerr 3,4 | min. 1.1 mm | — | — |
| Logistics | |||
| Product net weight | 15.2 kg | — | — |
| eClass code | 23-05-10-01 | — | — |
| UNSPSC code | 31171507 | — | — |
| Lubrication-qualified speed | |||
| Limiting speed — grease | — | — | 800 r/min |
| Limiting speed — oil | — | — | 1200 r/min |
| Main Dimensions & Performance Data | |||
| Inner diameter shaft washerd | — | 150 mm | — |
| Inner diameter shaft washerd | — | 5.906 in | — |
| Outer diameter housing washerD | — | 240 mm | — |
| Outer diameter housing washerD | — | 9.449 in | — |
| Basic dynamic load rating, axialCa | — | 285,000 N | — |
| Basic dynamic load rating, axialCa | — | 64,073.741 lbf | — |
| Basic static load rating, axialC0a | — | 930,000 N | — |
| Basic static load rating, axialC0a | — | 209,082.734 lbf | — |
| Fatigue load limit, axialCua | — | 29,500 N | — |
| Fatigue load limit, axialCua | — | 6,632.194 lbf | — |
| Manufacturer Identity | |||
| Schaeffler Product Code | — | 394938 | — |
| Base Type | — | 52234 | — |
| Old Designation | — | ["52234MP"] | — |
| Gpsd Group | — | S03 | — |
| Product Line Id | — | 14 | — |
| X Life Marking | — | n.r. | — |
| SAP material number | — | 0190656200000 | — |
| Base product | — | 2305100102 | — |
| Bearing X designation | — | 52234-MP | — |
| Mounting Manager ID | — | 52234-MP | — |
| Grease application ID | — | 52234-MP | — |
| Mass reference | |||
| Approximate assembly mass | — | — | 13.6 kg |
| Mounting dimensions | |||
| Maximum housing abutment diameterDa max. | — | — | 200 mm |
| Maximum housing-side fillet radiusra max. | — | — | 1.5 mm |
| Maximum shaft-side fillet radiusrb max. | — | — | 1 mm |
| Maximum diameter shaft shoulderda max | — | 170 mm | — |
| Maximum diameter shaft shoulderda max | — | 6.693 in | — |
| Maximum diameter of housing shoulderDa max | — | 198 mm | — |
| Maximum diameter of housing shoulderDa max | — | 7.795 in | — |
| Maximum filled radiusra max | — | 1.5 mm | — |
| Maximum filled radiusra max | — | 0.059 in | — |
| Maximum filled radiusra1 max | — | 1 mm | — |
| Maximum filled radiusra1 max | — | 0.039 in | — |
| Product characteristics | |||
| Tolerance classPN | — | Normal (ISO 492:2023) | — |
| Dimensional / heat stabilizationS0 | — | Rings dimensional stabilized up to 150° | — |
| Product identity | |||
| Official product category | Thrust ball bearings | — | — |
| Official taxonomy path | /products/rolling-bearings/ball-bearings/thrust-ball-bearings | — | — |
| Structure group ID | BE1_001_002 | — | — |
| Available from SKF | Yes | — | — |
| Remanufacturable | No | — | — |
| Product Identity | |||
| Construction | — | Axial deep groove ball bearing 522..-MP, double direction, solid brass cage | — |
| Short Description | — | Axial deep groove ball bearing | — |
| Properties | |||
| Axial load capability | Double-direction | — | — |
| Number of rows | 2 | — | — |
| Housing washer type | Flat | — | — |
| Tolerance class | Normal | — | — |
| Material, bearing | Bearing steel | — | — |
| Coating | Without | — | — |
| Indicative carbon footprint for new product | 56.2 kg CO 2 e | — | — |
| Technical Data | |||
| Inner Diameter Shaft Washer (D) | — | 150 mm | — |
| Outside Diameter (D) | — | 240 mm | — |
| Height (T2) | — | 97 mm | — |
| Basic Dynamic Load Rating, Axial (Ca) | — | 285,000 N | — |
| Basic Static Load Rating, Axial (C0A) | — | 930,000 N | — |
| Operating Temperature Min. (Tmin) | — | -30 °C | — |
| Limiting Speed (Ng) | — | 1,740 1/min | — |
| Operating Temperature Max. (Tmax) | — | 150 °C | — |
| Reference Speed (Nϑr) | — | 2,210 1/min | — |
| Height Shaft Washer (B) | — | 21 mm | — |
| Maximum Diameter Of Shaft Shoulder (Da Max) | — | 170 mm | — |
| Minimum Load Factor (A) | — | 4.5 | — |
| Bore Diameter Housing Washer (D1) | — | 173 mm | — |
| Maximum Diameter Of Housing Shoulder (Da Max) | — | 198 mm | — |
| Minimum Chamfer Dimension (Rmin) | — | 1.5 mm | — |
| Maximum Fillet Radius (Ra Max) | — | 1.5 mm | — |
| Maximum Recess Radius (Ra1 Max) | — | 1 mm | — |
| Minimum Chamfer Dimension (R1 Min) | — | 1.1 mm | — |
| Fatigue Load Limit, Axial (Cua) | — | 29,500 N | — |
| Temperature range | |||
| Operating temperature min.Tmin | — | -30 °C | — |
| Operating temperature min.Tmin | — | -22 °F | — |
| Operating temperature max.Tmax | — | 150 °C | — |
| Operating temperature max.Tmax | — | 302 °F | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.