Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Data incomplete
“51292” across 2 loaded brands
The base designation is shared, but too few brands have complete boundary dimensions. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | SKF51292 F460 × 620 × mm | FAG51292-MP460 × 620 × 130 mm |
|---|---|---|
| Comparable specifications | ||
| Brand | SKF | FAG |
| Designation | 51292 F | 51292-MP |
| Product family | Thrust ball bearings | — |
| Detailed type | Single direction thrust ball bearing | Axial deep groove ball bearings |
| Series | — | 51292 |
| Bore diameterd | 460 mm | 460 mm |
| Outside diameterD | 620 mm | 620 mm |
| WidthB | — | 130 mm |
| HeightH | 130 mm | — |
| Basic dynamic load ratingC | 923 kN | — |
| Basic static load ratingC0 | 5850 kN | — |
| Fatigue load limitPu | 95 kN | — |
| Reference speednref | 430 r/min | 660 r/min |
| Limiting speednG | 600 r/min | 660 r/min |
| Mass≈m | 116 kg | 116 kg |
| Precision class | — | PN — Normal (ISO 492:2023) |
| Cage | Machined brass | MP — Solid brass cage, rolling element guided |
| Bearing material | Bearing steel | — |
| Minimum operating temperatureTmin | — | -30 °C |
| Maximum operating temperatureTmax | — | 200 °C |
| Calculation factors | ||
| Minimum load factorA | 180 | 172 |
| Capabilities & suitability | ||
| Axial load capacity in one direction | — | Yes |
| Suitable for grease lubrication | — | Yes |
| Suitable for oil lubrication | — | Yes |
| Unsealed design | — | Yes |
| Largebearing | — | Yes |
| Dimensions | ||
| Minimum chamfer dimensionrmin | — | 5 mm |
| Minimum chamfer dimensionrmin | — | 0.197 in |
| Inner diameter housing washerD1 | — | 465 mm |
| Inner diameter housing washerD1 | — | 18.307 in |
| Outer diameter shaft washerd1 | — | 615 mm |
| Outer diameter shaft washerd1 | — | 24.213 in |
| Engineering — Abutment dimensions | ||
| Abutment diameter shaftd a | min. 557 mm | — |
| Abutment diameter housingD a | max. 523 mm | — |
| Fillet radiusr a | max. 4 mm | — |
| Engineering — Dimensions | ||
| Outside diameter shaft washerd 1 | ≈ 615 mm | — |
| Inner diameter housing washerD 1 | ≈ 465 mm | — |
| Chamfer dimension washerr 1,2 | min. 5 mm | — |
| Logistics | ||
| Product net weight | 116.0 kg | — |
| eClass code | 23-05-10-01 | — |
| UNSPSC code | 31171507 | — |
| Main Dimensions & Performance Data | ||
| Inner diameter shaft washerd | — | 460 mm |
| Inner diameter shaft washerd | — | 18.11 in |
| Outer diameter housing washerD | — | 620 mm |
| Outer diameter housing washerD | — | 24.409 in |
| Basic dynamic load rating, axialCa | — | 930,000 N |
| Basic dynamic load rating, axialCa | — | 209,082.734 lbf |
| Basic static load rating, axialC0a | — | 5,800,000 N |
| Basic static load rating, axialC0a | — | 1,303,956.835 lbf |
| Fatigue load limit, axialCua | — | 113,000 N |
| Fatigue load limit, axialCua | — | 25,404.676 lbf |
| Manufacturer Identity | ||
| Schaeffler Product Code | — | 394609 |
| Base Type | — | 51292 |
| Gpsd Group | — | S02 |
| Product Line Id | — | 14 |
| X Life Marking | — | n.r. |
| SAP material number | — | 0855605880000 |
| Base product | — | 2305100101 |
| Bearing X designation | — | 51292-MP |
| Mounting Manager ID | — | 51292-MP |
| Grease application ID | — | 51292-MP |
| Mounting dimensions | ||
| Minimum diameter shaft shoulderda min | — | 556 mm |
| Minimum diameter shaft shoulderda min | — | 21.89 in |
| Maximum diameter of housing shoulderDa max | — | 524 mm |
| Maximum diameter of housing shoulderDa max | — | 20.63 in |
| Maximum filled radiusra max | — | 4 mm |
| Maximum filled radiusra max | — | 0.157 in |
| Product characteristics | ||
| Tolerance classPN | — | Normal (ISO 492:2023) |
| Dimensional / heat stabilizationS1 | — | Rings dimensional stabilized up to 200° |
| Product identity | ||
| Official product category | Thrust ball bearings | — |
| Official taxonomy path | /products/rolling-bearings/ball-bearings/thrust-ball-bearings | — |
| Structure group ID | BD1_001_BDC_001 | — |
| Available from SKF | Yes | — |
| Remanufacturable | No | — |
| Product Identity | ||
| Construction | — | Axial deep groove ball bearing 512..-MP, single direction, solid brass cage |
| Short Description | — | Axial deep groove ball bearing |
| Properties | ||
| Axial load capability | Single-direction | — |
| Number of rows | 1 | — |
| Housing washer type | Flat | — |
| Tolerance class | Normal | — |
| Material, bearing | Bearing steel | — |
| Coating | Without | — |
| Indicative carbon footprint for new product | 429.0 kg CO 2 e | — |
| Technical Data | ||
| Bore Diameter (D) | — | 460 mm |
| Outside Diameter (D) | — | 620 mm |
| Width (B) | — | 130 mm |
| Basic Dynamic Load Rating, Axial (Ca) | — | 930,000 N |
| Basic Static Load Rating, Axial (C0A) | — | 5,800,000 N |
| Operating Temperature Min. (Tmin) | — | -30 °C |
| Limiting Speed (Ng) | — | 660 1/min |
| Operating Temperature Max. (Tmax) | — | 200 °C |
| Reference Speed (Nϑr) | — | 660 1/min |
| Minimum Diameter Shaft Shoulder (Da Min) | — | 556 mm |
| Minimum Load Factor (A) | — | 172 |
| Rip Diameter Shaft Washer (D1) | — | 615 mm |
| Bore Diameter Housing Washer (D1) | — | 465 mm |
| Maximum Diameter Of Housing Shoulder (Da Max) | — | 524 mm |
| Minimum Chamfer Dimension (Rmin) | — | 5 mm |
| Maximum Fillet Radius (Ra Max) | — | 4 mm |
| Fatigue Load Limit, Axial (Cua) | — | 113,000 N |
| Temperature range | ||
| Operating temperature min.Tmin | — | -30 °C |
| Operating temperature min.Tmin | — | -22 °F |
| Operating temperature max.Tmax | — | 200 °C |
| Operating temperature max.Tmax | — | 392 °F |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.