Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions verified
“51268” across 3 loaded brands
At least two brands share the same bore, outside diameter and width. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | FAG51268-MP340 × 460 × 96 mm | NSK51268X340 × 460 × 96 mm | KOYO51268340 × 460 × 96 mm |
|---|---|---|---|
| Comparable specifications | |||
| Brand | FAG | NSK | KOYO |
| Designation | 51268-MP | 51268X | 51268 |
| Product family | — | Axial deep groove ball bearing | Single direction / With flat back faces |
| Detailed type | Axial deep groove ball bearings | Axial deep groove ball bearings | Axial deep groove ball bearings |
| Series | 51268 | — | — |
| Bore diameterd | 340 mm | 340 mm | 340 mm |
| Outside diameterD | 460 mm | 460 mm | 460 mm |
| WidthB | 96 mm | 96 mm | 96 mm |
| Fatigue load limitPu | — | — | 63.8 kN |
| Reference speednref | 990 r/min | — | — |
| Limiting speednG | 920 r/min | — | 380 r/min |
| Mass≈m | 48.2 kg | 47.9 kg | 48 kg |
| Precision class | PN — Normal (ISO 492:2023) | — | — |
| Cage | MP — Solid brass cage, rolling element guided | — | — |
| Minimum operating temperatureTmin | -30 °C | — | — |
| Maximum operating temperatureTmax | 200 °C | — | — |
| Assembly boundary dimensions | |||
| Shaft-washer bore diameterd | — | 340 mm | — |
| Overall outside diameterD | — | 460 mm | — |
| Complete assembled heightT | — | 96 mm | — |
| Axial load ratings | |||
| Basic dynamic axial load ratingCa | — | 595000 N | — |
| Basic static axial load ratingC0a | — | 2800000 N | — |
| Calculation factors | |||
| Minimum load factorA | 49 | — | — |
| Capabilities & suitability | |||
| Axial load capacity in one direction | Yes | — | — |
| Suitable for grease lubrication | Yes | — | — |
| Suitable for oil lubrication | Yes | — | — |
| Unsealed design | Yes | — | — |
| Largebearing | Yes | — | — |
| Chamfers | |||
| Minimum housing-side chamferr min. | — | 3 mm | — |
| Classification | |||
| Official Category Path | — | — | Thrust ball bearings - Single direction - With flat back faces |
| Official Classification 1 | — | — | Thrust ball bearings / Single direction / With flat back faces |
| Component dimensions | |||
| Shaft washer outside diameterd1 | — | 455 mm | — |
| Housing washer bore diameterD1 | — | 345 mm | — |
| Construction | |||
| Axial load directions | — | One direction | — |
| Seat construction | — | Flat seat | — |
| Radial-load support | — | Not suitable for radial load; separate radial support required | — |
| Dimensions | |||
| Minimum chamfer dimensionrmin | 3 mm | — | — |
| Minimum chamfer dimensionrmin | 0.118 in | — | — |
| Inner diameter housing washerD1 | 345 mm | — | — |
| Inner diameter housing washerD1 | 13.583 in | — | — |
| Outer diameter shaft washerd1 | 455 mm | — | — |
| Outer diameter shaft washerd1 | 17.913 in | — | — |
| Lubrication-qualified speed | |||
| Limiting speed — grease | — | 430 r/min | — |
| Limiting speed — oil | — | 630 r/min | — |
| Main Dimensions & Performance Data | |||
| Inner diameter shaft washerd | 340 mm | — | — |
| Inner diameter shaft washerd | 13.386 in | — | — |
| Outer diameter housing washerD | 460 mm | — | — |
| Outer diameter housing washerD | 18.11 in | — | — |
| Basic dynamic load rating, axialCa | 620,000 N | — | — |
| Basic dynamic load rating, axialCa | 139,388.489 lbf | — | — |
| Basic static load rating, axialC0a | 3,050,000 N | — | — |
| Basic static load rating, axialC0a | 685,701.439 lbf | — | — |
| Fatigue load limit, axialCua | 69,000 N | — | — |
| Fatigue load limit, axialCua | 15,512.59 lbf | — | — |
| Manufacturer Identity | |||
| Schaeffler Product Code | 394603 | — | — |
| Official Class Key | — | — | 070-010-000 |
| Base Type | 51268 | — | — |
| Old Designation | ["51268MP","51268-M"] | — | — |
| Gpsd Group | S02 | — | — |
| Product Line Id | 14 | — | — |
| X Life Marking | n.r. | — | — |
| SAP material number | 0389693350000 | — | — |
| Base product | 2305100101 | — | — |
| Bearing X designation | 51268-MP | — | — |
| Mounting Manager ID | 51268-MP | — | — |
| Grease application ID | 51268-MP | — | — |
| Mass reference | |||
| Approximate assembly mass | — | 47.9 kg | — |
| Mounting dimensions | |||
| Minimum shaft abutment diameterda min. | — | 411 mm | — |
| Maximum housing abutment diameterDa max. | — | 389 mm | — |
| Maximum housing-side fillet radiusra max. | — | 2.5 mm | — |
| Minimum diameter shaft shoulderda min | 412 mm | — | — |
| Minimum diameter shaft shoulderda min | 16.22 in | — | — |
| Maximum diameter of housing shoulderDa max | 388 mm | — | — |
| Maximum diameter of housing shoulderDa max | 15.276 in | — | — |
| Maximum filled radiusra max | 2.5 mm | — | — |
| Maximum filled radiusra max | 0.098 in | — | — |
| Product characteristics | |||
| Tolerance classPN | Normal (ISO 492:2023) | — | — |
| Dimensional / heat stabilizationS1 | Rings dimensional stabilized up to 200° | — | — |
| Product Identity | |||
| Construction | Axial deep groove ball bearing 512..-MP, single direction, solid brass cage | — | — |
| Short Description | Axial deep groove ball bearing | — | — |
| Technical Data | |||
| d | — | — | 460 mm |
| T | — | — | 96 mm |
| R(Min.) | — | — | 3 mm |
| Basic Load Ratings Ca | — | — | 730 kN |
| Bore Diameter (D) | 340 mm | — | — |
| Basic Load Ratings C0A | — | — | 2830 kN |
| Outside Diameter (D) | 460 mm | — | — |
| Fatigue Load Limit : Cu | — | — | 63.8 kN |
| Width (B) | 96 mm | — | — |
| Limiting Speeds(Grease Lub.) | — | — | 380 min-1 |
| Basic Dynamic Load Rating, Axial (Ca) | 620,000 N | — | — |
| Limiting Speeds(Oil Lub.) | — | — | 570 min-1 |
| Basic Static Load Rating, Axial (C0A) | 3,050,000 N | — | — |
| D1(Max.) | — | — | 455 mm |
| Operating Temperature Min. (Tmin) | -30 °C | — | — |
| D1(Min.) | — | — | 345 mm |
| Limiting Speed (Ng) | 920 1/min | — | — |
| D2 | — | — | - mm |
| Operating Temperature Max. (Tmax) | 200 °C | — | — |
| D3 | — | — | - mm |
| Reference Speed (Nϑr) | 990 1/min | — | — |
| A | — | — | - mm |
| Minimum Diameter Shaft Shoulder (Da Min) | 412 mm | — | — |
| R | — | — | - mm |
| Minimum Load Factor (A) | 49 | — | — |
| C | — | — | - mm |
| Rip Diameter Shaft Washer (D1) | 455 mm | — | — |
| Da(Min.) | — | — | 411 mm |
| Bore Diameter Housing Washer (D1) | 345 mm | — | — |
| Da(Max.) | — | — | 389 mm |
| Maximum Diameter Of Housing Shoulder (Da Max) | 388 mm | — | — |
| Ra(Max.) | — | — | 2.5 mm |
| Minimum Chamfer Dimension (Rmin) | 3 mm | — | — |
| Mass(Refer.) | — | — | 48 kg |
| Maximum Fillet Radius (Ra Max) | 2.5 mm | — | — |
| Fatigue Load Limit, Axial (Cua) | 69,000 N | — | — |
| Temperature range | |||
| Operating temperature min.Tmin | -30 °C | — | — |
| Operating temperature min.Tmin | -22 °F | — | — |
| Operating temperature max.Tmax | 200 °C | — | — |
| Operating temperature max.Tmax | 392 °F | — | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.