Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Data incomplete
“512” across 2 loaded brands
The base designation is shared, but too few brands have complete boundary dimensions. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | SKF512/500 F500 × 670 × mm | FAG512/500-MP500 × 670 × 135 mm |
|---|---|---|
| Comparable specifications | ||
| Brand | SKF | FAG |
| Designation | 512/500 F | 512/500-MP |
| Product family | Thrust ball bearings | — |
| Detailed type | Single direction thrust ball bearing | Axial deep groove ball bearings |
| Series | — | 512/500 |
| Bore diameterd | 500 mm | 500 mm |
| Outside diameterD | 670 mm | 670 mm |
| WidthB | — | 135 mm |
| HeightH | 135 mm | — |
| Basic dynamic load ratingC | 1010 kN | — |
| Basic static load ratingC0 | 6800 kN | — |
| Fatigue load limitPu | 104 kN | — |
| Reference speednref | 380 r/min | 610 r/min |
| Limiting speednG | 530 r/min | 620 r/min |
| Mass≈m | 132 kg | 137.2 kg |
| Precision class | — | PN — Normal (ISO 492:2023) |
| Cage | Machined brass | MP — Solid brass cage, rolling element guided |
| Bearing material | Bearing steel | — |
| Minimum operating temperatureTmin | — | -30 °C |
| Maximum operating temperatureTmax | — | 200 °C |
| Calculation factors | ||
| Minimum load factorA | 240 | 210 |
| Capabilities & suitability | ||
| Axial load capacity in one direction | — | Yes |
| Suitable for grease lubrication | — | Yes |
| Suitable for oil lubrication | — | Yes |
| Unsealed design | — | Yes |
| Largebearing | — | Yes |
| Dimensions | ||
| Minimum chamfer dimensionrmin | — | 5 mm |
| Minimum chamfer dimensionrmin | — | 0.197 in |
| Inner diameter housing washerD1 | — | 505 mm |
| Inner diameter housing washerD1 | — | 19.882 in |
| Outer diameter shaft washerd1 | — | 665 mm |
| Outer diameter shaft washerd1 | — | 26.181 in |
| Engineering — Abutment dimensions | ||
| Abutment diameter shaftd a | min. 603 mm | — |
| Abutment diameter housingD a | max. 567 mm | — |
| Fillet radiusr a | max. 4 mm | — |
| Engineering — Dimensions | ||
| Outside diameter shaft washerd 1 | ≈ 665 mm | — |
| Inner diameter housing washerD 1 | ≈ 505 mm | — |
| Chamfer dimension washerr 1,2 | min. 5 mm | — |
| Logistics | ||
| Product net weight | 132.0 kg | — |
| eClass code | 23-05-10-01 | — |
| UNSPSC code | 31171507 | — |
| Main Dimensions & Performance Data | ||
| Inner diameter shaft washerd | — | 500 mm |
| Inner diameter shaft washerd | — | 19.685 in |
| Outer diameter housing washerD | — | 670 mm |
| Outer diameter housing washerD | — | 26.378 in |
| Basic dynamic load rating, axialCa | — | 970,000 N |
| Basic dynamic load rating, axialCa | — | 218,075.54 lbf |
| Basic static load rating, axialC0a | — | 6,300,000 N |
| Basic static load rating, axialC0a | — | 1,416,366.906 lbf |
| Fatigue load limit, axialCua | — | 119,000 N |
| Fatigue load limit, axialCua | — | 26,753.597 lbf |
| Manufacturer Identity | ||
| Schaeffler Product Code | — | 394574 |
| Base Type | — | 512/500 |
| Gpsd Group | — | S03 |
| Product Line Id | — | 14 |
| X Life Marking | — | n.r. |
| SAP material number | — | 0860806440000 |
| Base product | — | 2305100101 |
| Bearing X designation | — | 512/500-MP |
| Mounting Manager ID | — | 512/500-MP |
| Grease application ID | — | 512/500-MP |
| Mounting dimensions | ||
| Minimum diameter shaft shoulderda min | — | 602 mm |
| Minimum diameter shaft shoulderda min | — | 23.701 in |
| Maximum diameter of housing shoulderDa max | — | 568 mm |
| Maximum diameter of housing shoulderDa max | — | 22.362 in |
| Maximum filled radiusra max | — | 4 mm |
| Maximum filled radiusra max | — | 0.157 in |
| Product characteristics | ||
| Tolerance classPN | — | Normal (ISO 492:2023) |
| Dimensional / heat stabilizationS1 | — | Rings dimensional stabilized up to 200° |
| Product identity | ||
| Official product category | Thrust ball bearings | — |
| Official taxonomy path | /products/rolling-bearings/ball-bearings/thrust-ball-bearings | — |
| Structure group ID | BD1_001_BDC_001 | — |
| Available from SKF | Yes | — |
| Remanufacturable | No | — |
| Product Identity | ||
| Construction | — | Axial deep groove ball bearing 512..-MP, single direction, solid brass cage |
| Short Description | — | Axial deep groove ball bearing |
| Properties | ||
| Axial load capability | Single-direction | — |
| Number of rows | 1 | — |
| Housing washer type | Flat | — |
| Tolerance class | Normal | — |
| Material, bearing | Bearing steel | — |
| Coating | Without | — |
| Indicative carbon footprint for new product | 488.0 kg CO 2 e | — |
| Technical Data | ||
| Bore Diameter (D) | — | 500 mm |
| Outside Diameter (D) | — | 670 mm |
| Width (B) | — | 135 mm |
| Basic Dynamic Load Rating, Axial (Ca) | — | 970,000 N |
| Basic Static Load Rating, Axial (C0A) | — | 6,300,000 N |
| Operating Temperature Min. (Tmin) | — | -30 °C |
| Limiting Speed (Ng) | — | 620 1/min |
| Operating Temperature Max. (Tmax) | — | 200 °C |
| Reference Speed (Nϑr) | — | 610 1/min |
| Minimum Diameter Shaft Shoulder (Da Min) | — | 602 mm |
| Minimum Load Factor (A) | — | 210 |
| Rip Diameter Shaft Washer (D1) | — | 665 mm |
| Bore Diameter Housing Washer (D1) | — | 505 mm |
| Maximum Diameter Of Housing Shoulder (Da Max) | — | 568 mm |
| Minimum Chamfer Dimension (Rmin) | — | 5 mm |
| Maximum Fillet Radius (Ra Max) | — | 4 mm |
| Fatigue Load Limit, Axial (Cua) | — | 119,000 N |
| Temperature range | ||
| Operating temperature min.Tmin | — | -30 °C |
| Operating temperature min.Tmin | — | -22 °F |
| Operating temperature max.Tmax | — | 200 °C |
| Operating temperature max.Tmax | — | 392 °F |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.