Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions verified
“51120” across 3 loaded brands
At least two brands share the same bore, outside diameter and width. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | FAG51120100 × 135 × 25 mm | NSK51120100 × 135 × 25 mm | KOYO51120100 × 135 × 25 mm |
|---|---|---|---|
| Comparable specifications | |||
| Brand | FAG | NSK | KOYO |
| Designation | 51120 | 51120 | 51120 |
| Product family | — | Axial deep groove ball bearing | Single direction / With flat back faces |
| Detailed type | Axial deep groove ball bearings | Axial deep groove ball bearings | Axial deep groove ball bearings |
| Bore diameterd | 100 mm | 100 mm | 100 mm |
| Outside diameterD | 135 mm | 135 mm | 135 mm |
| WidthB | 25 mm | 25 mm | 25 mm |
| Fatigue load limitPu | — | — | 11.2 kN |
| Reference speednref | 3100 r/min | — | — |
| Limiting speednG | 2400 r/min | — | 1600 r/min |
| Mass≈m | 0.992 kg | 0.96 kg | 0.99 kg |
| Precision class | PN — Normal (ISO 492:2023) | — | — |
| Cage | JP — Steel sheet metal | — | — |
| Minimum operating temperatureTmin | -30 °C | — | — |
| Maximum operating temperatureTmax | 150 °C | — | — |
| Assembly boundary dimensions | |||
| Shaft-washer bore diameterd | — | 100 mm | — |
| Overall outside diameterD | — | 135 mm | — |
| Complete assembled heightT | — | 25 mm | — |
| Axial load ratings | |||
| Basic dynamic axial load ratingCa | — | 86000 N | — |
| Basic static axial load ratingC0a | — | 268000 N | — |
| Calculation factors | |||
| Minimum load factorA | 0.36 | — | — |
| Capabilities & suitability | |||
| Axial load capacity in one direction | Yes | — | — |
| Suitable for grease lubrication | Yes | — | — |
| Suitable for oil lubrication | Yes | — | — |
| Unsealed design | Yes | — | — |
| Chamfers | |||
| Minimum housing-side chamferr min. | — | 1 mm | — |
| Classification | |||
| Official Category Path | — | — | Thrust ball bearings - Single direction - With flat back faces |
| Official Classification 1 | — | — | Thrust ball bearings / Single direction / With flat back faces |
| Component dimensions | |||
| Shaft washer outside diameterd1 | — | 135 mm | — |
| Housing washer bore diameterD1 | — | 102 mm | — |
| Construction | |||
| Axial load directions | — | One direction | — |
| Seat construction | — | Flat seat | — |
| Radial-load support | — | Not suitable for radial load; separate radial support required | — |
| Dimensions | |||
| Minimum chamfer dimensionrmin | 1 mm | — | — |
| Minimum chamfer dimensionrmin | 0.039 in | — | — |
| Inner diameter housing washerD1 | 102 mm | — | — |
| Inner diameter housing washerD1 | 4.016 in | — | — |
| Outer diameter shaft washerd1 | 135 mm | — | — |
| Outer diameter shaft washerd1 | 5.315 in | — | — |
| Lubrication-qualified speed | |||
| Limiting speed — grease | — | 1700 r/min | — |
| Limiting speed — oil | — | 2600 r/min | — |
| Main Dimensions & Performance Data | |||
| Inner diameter shaft washerd | 100 mm | — | — |
| Inner diameter shaft washerd | 3.937 in | — | — |
| Outer diameter housing washerD | 135 mm | — | — |
| Outer diameter housing washerD | 5.315 in | — | — |
| Basic dynamic load rating, axialCa | 85,000 N | — | — |
| Basic dynamic load rating, axialCa | 19,109.712 lbf | — | — |
| Basic static load rating, axialC0a | 268,000 N | — | — |
| Basic static load rating, axialC0a | 60,251.799 lbf | — | — |
| Fatigue load limit, axialCua | 11,238 N | — | — |
| Fatigue load limit, axialCua | 2,526.529 lbf | — | — |
| Manufacturer Identity | |||
| Schaeffler Product Code | 394438 | — | — |
| Official Class Key | — | — | 070-010-000 |
| Base Type | 51120 | — | — |
| Gpsd Group | S02 | — | — |
| Product Line Id | 14 | — | — |
| X Life Marking | n.r. | — | — |
| SAP material number | 0167148220000 | — | — |
| Base product | 2305100101 | — | — |
| Bearing X designation | 51120 | — | — |
| Mounting Manager ID | 51120 | — | — |
| Grease application ID | 51120 | — | — |
| Mass reference | |||
| Approximate assembly mass | — | 0.96 kg | — |
| Mounting dimensions | |||
| Minimum shaft abutment diameterda min. | — | 121 mm | — |
| Maximum housing abutment diameterDa max. | — | 114 mm | — |
| Maximum housing-side fillet radiusra max. | — | 1 mm | — |
| Minimum diameter shaft shoulderda min | 121 mm | — | — |
| Minimum diameter shaft shoulderda min | 4.764 in | — | — |
| Maximum diameter of housing shoulderDa max | 114 mm | — | — |
| Maximum diameter of housing shoulderDa max | 4.488 in | — | — |
| Maximum filled radiusra max | 1 mm | — | — |
| Maximum filled radiusra max | 0.039 in | — | — |
| Product characteristics | |||
| Tolerance classPN | Normal (ISO 492:2023) | — | — |
| Dimensional / heat stabilizationS0 | Rings dimensional stabilized up to 150° | — | — |
| Product Identity | |||
| Construction | Axial deep groove ball bearing 511, single direction, steel sheet metal cage | — | — |
| Short Description | Axial deep groove ball bearing | — | — |
| Technical Data | |||
| d | — | — | 135 mm |
| T | — | — | 25 mm |
| R(Min.) | — | — | 1 mm |
| Bore Diameter (D) | 100 mm | — | — |
| Basic Load Ratings Ca | — | — | 106 kN |
| Outside Diameter (D) | 135 mm | — | — |
| Basic Load Ratings C0A | — | — | 268 kN |
| Width (B) | 25 mm | — | — |
| Fatigue Load Limit : Cu | — | — | 11.2 kN |
| Basic Dynamic Load Rating, Axial (Ca) | 85,000 N | — | — |
| Limiting Speeds(Grease Lub.) | — | — | 1600 min-1 |
| Basic Static Load Rating, Axial (C0A) | 268,000 N | — | — |
| Limiting Speeds(Oil Lub.) | — | — | 2500 min-1 |
| Operating Temperature Min. (Tmin) | -30 °C | — | — |
| D1(Max.) | — | — | 135 mm |
| Limiting Speed (Ng) | 2,400 1/min | — | — |
| D1(Min.) | — | — | 102 mm |
| Operating Temperature Max. (Tmax) | 150 °C | — | — |
| D2 | — | — | - mm |
| Reference Speed (Nϑr) | 3,100 1/min | — | — |
| D3 | — | — | - mm |
| Minimum Diameter Shaft Shoulder (Da Min) | 121 mm | — | — |
| A | — | — | - mm |
| Minimum Load Factor (A) | 0.36 | — | — |
| R | — | — | - mm |
| Rip Diameter Shaft Washer (D1) | 135 mm | — | — |
| C | — | — | - mm |
| Bore Diameter Housing Washer (D1) | 102 mm | — | — |
| Da(Min.) | — | — | 121 mm |
| Maximum Diameter Of Housing Shoulder (Da Max) | 114 mm | — | — |
| Da(Max.) | — | — | 114 mm |
| Minimum Chamfer Dimension (Rmin) | 1 mm | — | — |
| Ra(Max.) | — | — | 1 mm |
| Maximum Fillet Radius (Ra Max) | 1 mm | — | — |
| Mass(Refer.) | — | — | 0.99 kg |
| Fatigue Load Limit, Axial (Cua) | 11,238 N | — | — |
| Temperature range | |||
| Operating temperature min.Tmin | -30 °C | — | — |
| Operating temperature min.Tmin | -22 °F | — | — |
| Operating temperature max.Tmax | 150 °C | — | — |
| Operating temperature max.Tmax | 302 °F | — | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.