Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Cross Reference centre · Interchange verification checklist · Understand suffix differences
You entered 33221JR. This table explores the base group 33221; it does not preserve or approve every requested suffix. Search your complete marking first →
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions verified
“33221” across 3 loaded brands
At least two brands share the same bore, outside diameter and width. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | FAG33221105 × 190 × 68 mm | TIMKEN33221105 × 190 × 68 mm | KOYO33221JR105 × 190 × 68 mm |
|---|---|---|---|
| Comparable specifications | |||
| Brand | FAG | TIMKEN | KOYO |
| Designation | 33221 | 33221 | 33221JR |
| Product family | — | TS - Tapered Single | Single-row / Metric series |
| Detailed type | Tapered roller bearings | Tapered roller bearings | Tapered roller bearings |
| Series | — | 33221 | — |
| Bore diameterd | 105 mm | 105 mm | 105 mm |
| Outside diameterD | 190 mm | 190 mm | 190 mm |
| WidthB | 68 mm | 68 mm | 68 mm |
| Basic dynamic load ratingC | 475 kN | 661 kN | 622 kN |
| Basic static load ratingC0 | 720 kN | 784 kN | 790 kN |
| Fatigue load limitPu | 84 kN | — | 97.4 kN |
| Reference speednref | 2550 r/min | — | — |
| Limiting speednG | 3500 r/min | — | 2000 r/min |
| Mass≈m | 8.4 kg | 7.96 kg | 8.43 kg |
| Precision class | P6X — Class 6X (ISO 492:2023) | ABMA Class K | — |
| Sealing | — | Open | — |
| Cage | Standard — Sheet steel cage, window cage, roller-guided | Steel cage | — |
| Minimum operating temperatureTmin | -30 °C | — | — |
| Maximum operating temperatureTmax | 120 °C | — | — |
| Additional information | |||
| Comparative designation to ISO 10317 and ISO 355 | T3FE105 | — | — |
| Calculation Factors | |||
| K Factor | — | 1.45 | — |
| Y1 Factor | — | 1.49 | — |
| Y2 Factor | — | 0.00 | — |
| Y0 Factor | — | 0.82 | — |
| E Factor | — | 0.40 | — |
| Cg Factor | — | 0.1117 | — |
| Calculation factors | |||
| Limiting value of Fa/Fr for the applicability of diff. Values of factors X and Ye | 0.4 | — | — |
| Dynamic axial load factorY | 1.49 | — | — |
| Static axial load factorY0 | 0.82 | — | — |
| Capabilities & suitability | |||
| Radial load capacity | Yes | — | — |
| Axial load capacity in one direction | Yes | — | — |
| Suitable for grease lubrication | Yes | — | — |
| Suitable for oil lubrication | Yes | — | — |
| Unsealed design | Yes | — | — |
| Classification | |||
| Official Category Path | — | — | Tapered roller bearings - Single-row - Metric series |
| Official Classification 1 | — | — | Tapered roller bearings / Single-row / Metric series |
| Dimensions | |||
| Minimum chamfer dimension of inner ring back facer1, 2 min | 3 mm | — | — |
| Minimum chamfer dimension of inner ring back facer1, 2 min | 0.118 in | — | — |
| Minimum chamfer dimension of outer ring back facer3, 4 min | 2.5 mm | — | — |
| Minimum chamfer dimension of outer ring back facer3, 4 min | 0.098 in | — | — |
| Distance between the apexes of the pressure conesa | 49 mm | — | — |
| Distance between the apexes of the pressure conesa | 1.929 in | — | — |
| Guidance rib diameter of inner ringd1 | 145.9 mm | — | — |
| Guidance rib diameter of inner ringd1 | 5.744 in | — | — |
| Main Dimensions & Performance Data | |||
| Width, inner ringB | 68 mm | — | — |
| Width, inner ringB | 2.677 in | — | — |
| Width, outer ringC | 52 mm | — | — |
| Width, outer ringC | 2.047 in | — | — |
| Width, totalT | 68 mm | — | — |
| Width, totalT | 2.677 in | — | — |
| Basic dynamic load rating, radialCr | 475,000 N | — | — |
| Basic dynamic load rating, radialCr | 106,789.568 lbf | — | — |
| Basic static load rating, radialC0r | 720,000 N | — | — |
| Basic static load rating, radialC0r | 161,870.504 lbf | — | — |
| Fatigue load limit, radialCur | 84,000 N | — | — |
| Fatigue load limit, radialCur | 18,884.892 lbf | — | — |
| Thermal speed ratingnϑr | 2,550 1/min | — | — |
| Manufacturer Identity | |||
| Schaeffler Product Code | 2268693 | — | — |
| Material Number | — | 000000000190056958 | — |
| Official Class Key | — | — | 050-010-010 |
| Base Type | 33221 | — | — |
| World Assembly Part Number | — | X33221M_Y33221M | — |
| Product Line Id | 64 | — | — |
| Inner Ring Part Number | — | X33221M | — |
| Outer Ring Part Number | — | Y33221M | — |
| Drawing Number | — | C-111230 | — |
| Upc | — | 0087796397477 | — |
| Official Source System | — | CORE BP - DS DF | — |
| Official Last Run | — | 2026-08-23T20:02:46.737 | — |
| Base product | 2305091001 | — | — |
| Bearing X designation | 33221 | — | — |
| Mounting Manager ID | 33221 | — | — |
| Grease application ID | 33221 | — | — |
| Mounting dimensions | |||
| Maximum diameter of shaft shoulderda max | 117 mm | — | — |
| Maximum diameter of shaft shoulderda max | 4.606 in | — | — |
| Minimum diameter of shaft shoulderdb min | 117 mm | — | — |
| Minimum diameter of shaft shoulderdb min | 4.606 in | — | — |
| Minimum diameter of housing shoulderDa min | 159 mm | — | — |
| Minimum diameter of housing shoulderDa min | 6.26 in | — | — |
| Maximum diameter of housing shoulderDa max | 178 mm | — | — |
| Maximum diameter of housing shoulderDa max | 7.008 in | — | — |
| Minimum diameter of housing shoulderDb min | 182 mm | — | — |
| Minimum diameter of housing shoulderDb min | 7.165 in | — | — |
| Minimum axial spaceCa min | 10 mm | — | — |
| Minimum axial spaceCa min | 0.394 in | — | — |
| Minimum axial spaceCb min | 16 mm | — | — |
| Minimum axial spaceCb min | 0.63 in | — | — |
| Maximum fillet radius of shaftra max | 3 mm | — | — |
| Maximum fillet radius of shaftra max | 0.118 in | — | — |
| Maximum fillet radius of housingrb max | 2.5 mm | — | — |
| Maximum fillet radius of housingrb max | 0.098 in | — | — |
| Product characteristics | |||
| Tolerance classP6X | Class 6X (ISO 492:2023) | — | — |
| Heat treatment | Standard | — | — |
| Internal design | Standard | — | — |
| Quality level | Standard | — | — |
| Number of rows1 | Single-row design | — | — |
| Product Identity | |||
| Construction | Tapered roller bearings 332, main dimensions acc. to DIN 720, separable | Single Row Tapered Roller Bearing Assembly | Imperial Series | 4.1339 in Bore | 7.4803 in OD | 2.6772 in Width | Open | Cylindrical Bore | Steel Cage | Precision ABMA Class K | — |
| Short Description | Tapered roller bearing | — | — |
| Type Description | — | TS - Tapered Single | — |
| Number Of Rows | — | 1 | — |
| Tapered Bore | — | N | — |
| Technical Data | |||
| d | — | — | 190 mm |
| Bore Diameter (D) | 105 mm | — | — |
| T | — | — | 68 mm |
| Outside Diameter (D) | 190 mm | — | — |
| B | — | — | 68 mm |
| Width (B) | 68 mm | — | — |
| C | — | — | 52 mm |
| Basic Dynamic Load Rating, Radial (Cr) | 475,000 N | — | — |
| Overall Width | — | 79.200 mm | — |
| R(Min.) | — | — | 3 mm |
| Basic Static Load Rating, Radial (C0R) | 720,000 N | — | — |
| Radial Rating | — | 171,000 N | — |
| R1(Min.) | — | — | 2.5 mm |
| Operating Temperature Min. (Tmin) | -30 °C | — | — |
| Axial Rating | — | 118,000 N | — |
| Basic Load Ratings : Cr | — | — | 622 kN |
| Limiting Speed (Ng) | 3,500 1/min | — | — |
| Dynamic Rating C1 | — | 661,000 N | — |
| Basic Load Ratings : C0R | — | — | 790 kN |
| Operating Temperature Max. (Tmax) | 120 °C | — | — |
| Dynamic Rating C90 | — | 171,000 N | — |
| Fatigue Load Limit : Cu | — | — | 97.4 kN |
| Reference Speed (Nϑr) | 2,550 1/min | — | — |
| Dynamic Axial Rating Ca90 | — | 118,000 N | — |
| Limiting Speeds(Grease Lub.) | — | — | 2000 min-1 |
| Maximum Fillet Radius Of Housing (Rb Max) | 2.5 mm | — | — |
| Dynamic Axial Rating Ca1 | — | 455,000 N | — |
| Limiting Speeds(Oil Lub.) | — | — | 2600 min-1 |
| Minimum Chamfer Dimension Of Outer Ring Back Face (R3, 4 M) | 2.5 mm | — | — |
| Static Radial Rating C0 | — | 784,000 N | — |
| Load Center Spread : A | — | — | 48.8 mm |
| Minimum Diameter Of Housing Shoulder (Da Min) | 159 mm | — | — |
| Extended Dynamic Rating Ce | — | 0 N | — |
| Constant E | — | — | 0.40 |
| Minimum Diameter Of Housing Shoulder (Db Min) | 182 mm | — | — |
| Static Axial Rating C0A | — | 918,000 N | — |
| Axial Load Factors : Y1 | — | — | 1.49 |
| Width, Outer Ring (C) | 52 mm | — | — |
| Axial Load Factors : Y0 | — | — | 0.82 |
| Fatigue Load Limit, Radial (Cur) | 84,000 N | — | — |
| Da(Min.) | — | — | 159 mm |
| Limiting Value Of Fa/Fr For The Applicability Of Diff. Values Of Factors X And Y (E) | 0.4 | — | — |
| Db(Max.) | — | — | 117 mm |
| Maximum Diameter Of Shaft Shoulder (Da Max) | 117 mm | — | — |
| Da(Max.) | — | — | 178 mm |
| Minimum Diameter Of Shaft Shoulder (Db Min) | 117 mm | — | — |
| Db(Min.) | — | — | 182 mm |
| Maximum Diameter Of Housing Shoulder (Da Max) | 178 mm | — | — |
| Sa(Min.) | — | — | 10 mm |
| Dynamic Axial Load Factor (Y) | 1.49 | — | — |
| Sb(Min.) | — | — | 16 mm |
| Maximum Fillet Radius (Ra Max) | 3 mm | — | — |
| Ra(Max.) | — | — | 2.5 mm |
| Minimum Axial Space (Cb Min) | 16 mm | — | — |
| Rb(Max.) | — | — | 2 mm |
| Minimum Chamfer Dimension Of Inner Ring Back Face (R1, 2 M) | 3 mm | — | — |
| Mass(Refer.) | — | — | 8.43 kg |
| Guidance Rib Diameter Of Inner Ring (D1) | 145.9 mm | — | — |
| Minimum Axial Space (Ca Min) | 10 mm | — | — |
| Width, Inner Ring (B) | 68 mm | — | — |
| Static Axial Load Factor (Y0) | 0.82 | — | — |
| Distance Between The Apexes Of The Pressure Cones (A) | 49 mm | — | — |
| Temperature range | |||
| Operating temperature min.Tmin | -30 °C | — | — |
| Operating temperature min.Tmin | -22 °F | — | — |
| Operating temperature max.Tmax | 120 °C | — | — |
| Operating temperature max.Tmax | 248 °F | — | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.