Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Cross Reference centre · Interchange verification checklist · Understand suffix differences
You entered 33219JR. This table explores the base group 33219; it does not preserve or approve every requested suffix. Search your complete marking first →
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions verified
“33219” across 2 loaded brands
At least two brands share the same bore, outside diameter and width. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | FAG3321995 × 170 × 58 mm | KOYO33219JR95 × 170 × 58 mm |
|---|---|---|
| Comparable specifications | ||
| Brand | FAG | KOYO |
| Designation | 33219 | 33219JR |
| Product family | — | Single-row / Metric series |
| Detailed type | Tapered roller bearings | Tapered roller bearings |
| Bore diameterd | 95 mm | 95 mm |
| Outside diameterD | 170 mm | 170 mm |
| WidthB | 58 mm | 58 mm |
| Basic dynamic load ratingC | 375 kN | 468 kN |
| Basic static load ratingC0 | 560 kN | 582 kN |
| Fatigue load limitPu | 67 kN | 74 kN |
| Reference speednref | 2850 r/min | — |
| Limiting speednG | 3950 r/min | 2200 r/min |
| Mass≈m | 5.46 kg | 5.66 kg |
| Precision class | P6X — Class 6X (ISO 492:2023) | — |
| Cage | Standard — Sheet steel cage, window cage, roller-guided | — |
| Minimum operating temperatureTmin | -30 °C | — |
| Maximum operating temperatureTmax | 120 °C | — |
| Additional information | ||
| Comparative designation to ISO 10317 and ISO 355 | T3FE095 | — |
| Calculation factors | ||
| Limiting value of Fa/Fr for the applicability of diff. Values of factors X and Ye | 0.41 | — |
| Dynamic axial load factorY | 1.47 | — |
| Static axial load factorY0 | 0.81 | — |
| Capabilities & suitability | ||
| Radial load capacity | Yes | — |
| Axial load capacity in one direction | Yes | — |
| Suitable for grease lubrication | Yes | — |
| Suitable for oil lubrication | Yes | — |
| Unsealed design | Yes | — |
| Classification | ||
| Official Category Path | — | Tapered roller bearings - Single-row - Metric series |
| Official Classification 1 | — | Tapered roller bearings / Single-row / Metric series |
| Dimensions | ||
| Minimum chamfer dimension of inner ring back facer1, 2 min | 3 mm | — |
| Minimum chamfer dimension of inner ring back facer1, 2 min | 0.118 in | — |
| Minimum chamfer dimension of outer ring back facer3, 4 min | 2.5 mm | — |
| Minimum chamfer dimension of outer ring back facer3, 4 min | 0.098 in | — |
| Distance between the apexes of the pressure conesa | 43 mm | — |
| Distance between the apexes of the pressure conesa | 1.693 in | — |
| Guidance rib diameter of inner ringd1 | 132 mm | — |
| Guidance rib diameter of inner ringd1 | 5.197 in | — |
| Main Dimensions & Performance Data | ||
| Width, inner ringB | 58 mm | — |
| Width, inner ringB | 2.283 in | — |
| Width, outer ringC | 44 mm | — |
| Width, outer ringC | 1.732 in | — |
| Width, totalT | 58 mm | — |
| Width, totalT | 2.283 in | — |
| Basic dynamic load rating, radialCr | 375,000 N | — |
| Basic dynamic load rating, radialCr | 84,307.554 lbf | — |
| Basic static load rating, radialC0r | 560,000 N | — |
| Basic static load rating, radialC0r | 125,899.281 lbf | — |
| Fatigue load limit, radialCur | 67,000 N | — |
| Fatigue load limit, radialCur | 15,062.95 lbf | — |
| Thermal speed ratingnϑr | 2,850 1/min | — |
| Manufacturer Identity | ||
| Schaeffler Product Code | 1071008 | — |
| Official Class Key | — | 050-010-010 |
| Base Type | 33219 | — |
| Gpsd Group | F04 | — |
| Product Line Id | 64 | — |
| X Life Marking | n.r. | — |
| SAP material number | 0392972170000 | — |
| Base product | 2305091001 | — |
| Bearing X designation | 33219 | — |
| Mounting Manager ID | 33219 | — |
| Grease application ID | 33219 | — |
| Mounting dimensions | ||
| Maximum diameter of shaft shoulderda max | 107 mm | — |
| Maximum diameter of shaft shoulderda max | 4.213 in | — |
| Minimum diameter of shaft shoulderdb min | 107 mm | — |
| Minimum diameter of shaft shoulderdb min | 4.213 in | — |
| Minimum diameter of housing shoulderDa min | 144 mm | — |
| Minimum diameter of housing shoulderDa min | 5.669 in | — |
| Maximum diameter of housing shoulderDa max | 158 mm | — |
| Maximum diameter of housing shoulderDa max | 6.22 in | — |
| Minimum diameter of housing shoulderDb min | 163 mm | — |
| Minimum diameter of housing shoulderDb min | 6.417 in | — |
| Minimum axial spaceCa min | 9 mm | — |
| Minimum axial spaceCa min | 0.354 in | — |
| Minimum axial spaceCb min | 14 mm | — |
| Minimum axial spaceCb min | 0.551 in | — |
| Maximum fillet radius of shaftra max | 3 mm | — |
| Maximum fillet radius of shaftra max | 0.118 in | — |
| Maximum fillet radius of housingrb max | 2.5 mm | — |
| Maximum fillet radius of housingrb max | 0.098 in | — |
| Product characteristics | ||
| Tolerance classP6X | Class 6X (ISO 492:2023) | — |
| Heat treatment | Standard | — |
| Internal design | Standard | — |
| Quality level | Standard | — |
| Number of rows1 | Single-row design | — |
| Product Identity | ||
| Construction | Tapered roller bearings 332, main dimensions acc. to DIN 720, separable | — |
| Short Description | Tapered roller bearing | — |
| Technical Data | ||
| d | — | 170 mm |
| T | — | 58 mm |
| B | — | 58 mm |
| Bore Diameter (D) | 95 mm | — |
| C | — | 44 mm |
| Outside Diameter (D) | 170 mm | — |
| R(Min.) | — | 3 mm |
| Width (B) | 58 mm | — |
| R1(Min.) | — | 2.5 mm |
| Basic Dynamic Load Rating, Radial (Cr) | 375,000 N | — |
| Basic Load Ratings : Cr | — | 468 kN |
| Basic Static Load Rating, Radial (C0R) | 560,000 N | — |
| Basic Load Ratings : C0R | — | 582 kN |
| Operating Temperature Min. (Tmin) | -30 °C | — |
| Fatigue Load Limit : Cu | — | 74.0 kN |
| Limiting Speed (Ng) | 3,950 1/min | — |
| Limiting Speeds(Grease Lub.) | — | 2200 min-1 |
| Operating Temperature Max. (Tmax) | 120 °C | — |
| Limiting Speeds(Oil Lub.) | — | 2900 min-1 |
| Reference Speed (Nϑr) | 2,850 1/min | — |
| Load Center Spread : A | — | 42.8 mm |
| Maximum Fillet Radius Of Housing (Rb Max) | 2.5 mm | — |
| Constant E | — | 0.41 |
| Minimum Chamfer Dimension Of Outer Ring Back Face (R3, 4 M) | 2.5 mm | — |
| Axial Load Factors : Y1 | — | 1.47 |
| Minimum Diameter Of Housing Shoulder (Da Min) | 144 mm | — |
| Axial Load Factors : Y0 | — | 0.81 |
| Minimum Diameter Of Housing Shoulder (Db Min) | 163 mm | — |
| Da(Min.) | — | 144 mm |
| Width, Outer Ring (C) | 44 mm | — |
| Db(Max.) | — | 107 mm |
| Fatigue Load Limit, Radial (Cur) | 67,000 N | — |
| Da(Max.) | — | 158 mm |
| Limiting Value Of Fa/Fr For The Applicability Of Diff. Values Of Factors X And Y (E) | 0.41 | — |
| Db(Min.) | — | 163 mm |
| Maximum Diameter Of Shaft Shoulder (Da Max) | 107 mm | — |
| Sa(Min.) | — | 9 mm |
| Minimum Diameter Of Shaft Shoulder (Db Min) | 107 mm | — |
| Sb(Min.) | — | 14 mm |
| Maximum Diameter Of Housing Shoulder (Da Max) | 158 mm | — |
| Ra(Max.) | — | 2.5 mm |
| Dynamic Axial Load Factor (Y) | 1.47 | — |
| Rb(Max.) | — | 2 mm |
| Maximum Fillet Radius (Ra Max) | 3 mm | — |
| Mass(Refer.) | — | 5.66 kg |
| Minimum Axial Space (Cb Min) | 14 mm | — |
| Minimum Chamfer Dimension Of Inner Ring Back Face (R1, 2 M) | 3 mm | — |
| Guidance Rib Diameter Of Inner Ring (D1) | 132 mm | — |
| Minimum Axial Space (Ca Min) | 9 mm | — |
| Width, Inner Ring (B) | 58 mm | — |
| Static Axial Load Factor (Y0) | 0.81 | — |
| Distance Between The Apexes Of The Pressure Cones (A) | 43 mm | — |
| Temperature range | ||
| Operating temperature min.Tmin | -30 °C | — |
| Operating temperature min.Tmin | -22 °F | — |
| Operating temperature max.Tmax | 120 °C | — |
| Operating temperature max.Tmax | 248 °F | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.