Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions verified
“3314” across 3 loaded brands
At least two brands share the same bore, outside diameter and width. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | SKF3314 A70 × 150 × 63.5 mm | FAG3314-DA70 × 150 × 63.5 mm | KOYO331470 × 150 × 63.5 mm |
|---|---|---|---|
| Comparable specifications | |||
| Brand | SKF | FAG | KOYO |
| Designation | 3314 A | 3314-DA | 3314 |
| Product family | Angular contact ball bearings | — | Double-row / Open |
| Detailed type | Double row angular contact ball bearing | Angular contact ball bearings | Angular contact ball bearings |
| Series | — | 3314 | — |
| Bore diameterd | 70 mm | 70 mm | 70 mm |
| Outside diameterD | 150 mm | 150 mm | 150 mm |
| WidthB | 63.5 mm | 63.5 mm | 63.5 mm |
| Basic dynamic load ratingC | 163 kN | 157 kN | 188 kN |
| Basic static load ratingC0 | 125 kN | 157 kN | 160 kN |
| Fatigue load limitPu | 5 kN | 8.5 kN | 7.9 kN |
| Reference speednref | 5000 r/min | 4550 r/min | — |
| Limiting speednG | 4300 r/min | 4800 r/min | 2700 r/min |
| Mass≈m | 4.47 kg | 5.21 kg | 5.04 kg |
| Precision class | — | PN — Normal (ISO 492:2023) | — |
| Sealing | Without | Without — Not sealed | Open |
| Cage | Sheet metal | JP — Steel sheet metal | — |
| Bearing material | Bearing steel | — | — |
| Lubricant | None | Without — Bearing not greased | — |
| Minimum operating temperatureTmin | — | -30 °C | — |
| Maximum operating temperatureTmax | — | 150 °C | — |
| Capabilities & suitability | |||
| Radial load capacity | — | Yes | — |
| Axial load capacity in one direction | — | Yes | — |
| Axial load capacity in both directions | — | Yes | — |
| Suitable for grease lubrication | — | Yes | — |
| Suitable for oil lubrication | — | Yes | — |
| Unsealed design | — | Yes | — |
| Classification | |||
| Official Category Path | — | — | Angular contact ball bearings - Double-row - Open |
| Official Classification 1 | — | — | Angular contact ball bearings / Double-row / Open |
| Dimensions | |||
| Contact angle | 30.0 ° | — | — |
| Minimum chamfer dimensionrmin | — | 2.1 mm | — |
| Minimum chamfer dimensionrmin | — | 0.083 in | — |
| Shoulder diameter outer ringD1 | — | 132.36 mm | — |
| Shoulder diameter outer ringD1 | — | 5.211 in | — |
| Shoulder diameter inner ringd1 | — | 103.36 mm | — |
| Shoulder diameter inner ringd1 | — | 4.069 in | — |
| Distance between the apexes of the pressure conesa | — | 141 mm | — |
| Distance between the apexes of the pressure conesa | — | 5.551 in | — |
| Contact angleα | — | 45 ° | — |
| Engineering — Abutment dimensions | |||
| Abutment diameter shaftd a | min. 82 mm | — | — |
| Abutment diameter housingD a | max. 138 mm | — | — |
| Fillet radiusr a | max. 2 mm | — | — |
| Engineering — Calculation data | |||
| SKF performance class | SKF Explorer | — | — |
| Calculation factork r | 0.07 | — | — |
| Limiting valuee | 0.8 | — | — |
| Calculation factorX | 0.63 | — | — |
| Calculation factorY 0 | 0.66 | — | — |
| Calculation factorY 1 | 0.78 | — | — |
| Calculation factorY 2 | 1.2 | — | — |
| Engineering — Dimensions | |||
| Shoulder diameter inner ringd 1 | ≈ 96.5 mm | — | — |
| Shoulder diameter outer ringD 1 | ≈ 131 mm | — | — |
| Chamfer dimension inner ringr 1,2 | min. 2.1 mm | — | — |
| Distance pressure point(s)a | 89 mm | — | — |
| Logistics | |||
| Product net weight | 4.47 kg | — | — |
| eClass code | 23-05-08-03 | — | — |
| UNSPSC code | 31171531 | — | — |
| Main Dimensions & Performance Data | |||
| Basic dynamic load rating, radialCr | — | 157,000 N | — |
| Basic dynamic load rating, radialCr | — | 35,296.763 lbf | — |
| Basic static load rating, radialC0r | — | 157,000 N | — |
| Basic static load rating, radialC0r | — | 35,296.763 lbf | — |
| Fatigue load limit, radialCur | — | 8,500 N | — |
| Fatigue load limit, radialCur | — | 1,910.971 lbf | — |
| Manufacturer Identity | |||
| Schaeffler Product Code | — | 361314 | — |
| Official Class Key | — | — | 020-030-000 |
| Base Type | — | 3314 | — |
| Old Designation | — | ["3314DA","3314D"] | — |
| Gpsd Group | — | S03 | — |
| Product Line Id | — | 14 | — |
| X Life Marking | — | n.r. | — |
| SAP material number | — | 0167138850000 | — |
| Base product | — | 2305080303 | — |
| Bearing X designation | — | 3314-DA | — |
| Mounting Manager ID | — | 3314-DA | — |
| Grease application ID | — | 3314-DA | — |
| Mounting dimensions | |||
| Minimum diameter shaft shoulderda min | — | 82 mm | — |
| Minimum diameter shaft shoulderda min | — | 3.228 in | — |
| Maximum diameter of housing shoulderDa max | — | 138 mm | — |
| Maximum diameter of housing shoulderDa max | — | 5.433 in | — |
| Maximum fillet radiusra max | — | 2.1 mm | — |
| Maximum fillet radiusra max | — | 0.083 in | — |
| Product characteristics | |||
| Design variantDA | — | Bearing with split inner ring | — |
| Type of SealWithout | — | Not sealed | — |
| Tolerance classPN | — | Normal (ISO 492:2023) | — |
| Dimensional / heat stabilizationS0 | — | Rings dimensional stabilized up to 150° | — |
| Axial internal clearanceCN | — | Group N (CN) | — |
| Product identity | |||
| Official product category | Angular contact ball bearings | — | — |
| Official taxonomy path | /products/rolling-bearings/ball-bearings/angular-contact-ball-bearings/double-row-angular-contact-ball-bearings | — | — |
| Structure group ID | BA2_001 | — | — |
| Available from SKF | Yes | — | — |
| Remanufacturable | No | — | — |
| Product Identity | |||
| Construction | — | Angular contact ball bearing 33..-DA, double row, split inner ring, steel sheet metal cage | — |
| Short Description | — | Angular contact ball bearing | — |
| Properties | |||
| Contact type | Normal contact (two-point contact) | — | — |
| Number of rows | 2 | — | — |
| Locating feature, bearing outer ring | Without | — | — |
| Ring type | One-piece inner and outer rings | — | — |
| Arrangement of contact angle (double-row bearing) | Back-to-back (O) | — | — |
| Matched arrangement | No | — | — |
| Universal matching bearing | No | — | — |
| Axial internal clearance | CN | — | — |
| Material, bearing | Bearing steel | — | — |
| Coating | Without | — | — |
| Relubrication feature | Without | — | — |
| Indicative carbon footprint for new product | 16.5 kg CO 2 e | — | — |
| Technical Data | |||
| d | — | — | 150 mm |
| B | — | — | 63.5 mm |
| R(Min.) | — | — | 2.1 mm |
| Basic Load Ratings : Cr | — | — | 188 kN |
| Bore Diameter (D) | — | 70 mm | — |
| Basic Load Ratings : C0R | — | — | 160 kN |
| Outside Diameter (D) | — | 150 mm | — |
| Fatigue Load Limit : Cu | — | — | 7.90 kN |
| Width (B) | — | 63.5 mm | — |
| Limiting Speeds(Grease Lub.) | — | — | 2700 min-1 |
| Basic Dynamic Load Rating, Radial (Cr) | — | 157,000 N | — |
| Limiting Speeds(Oil Lub.) | — | — | 3600 min-1 |
| Basic Static Load Rating, Radial (C0R) | — | 157,000 N | — |
| Load Center Spread : A | — | — | 99.7 mm |
| Operating Temperature Min. (Tmin) | — | -30 °C | — |
| Da(Min.) | — | — | 82 mm |
| Limiting Speed (Ng) | — | 4,800 1/min | — |
| Da(Max.) | — | — | 138 mm |
| Operating Temperature Max. (Tmax) | — | 150 °C | — |
| Reference Speed (Nϑr) | — | 4,550 1/min | — |
| Ra(Max.) | — | — | 2 mm |
| Fatigue Load Limit, Radial (Cur) | — | 8,500 N | — |
| Mass(Refer.) | — | — | 5.04 kg |
| Minimum Diameter Shaft Shoulder (Da Min) | — | 82 mm | — |
| Shoulder Diameter Inner Ring (D1) | — | 103.36 mm | — |
| Maximum Diameter Of Housing Shoulder (Da Max) | — | 138 mm | — |
| Minimum Chamfer Dimension (Rmin) | — | 2.1 mm | — |
| Maximum Fillet Radius (Ra Max) | — | 2.1 mm | — |
| Shoulder Diameter Outer Ring (D1) | — | 132.36 mm | — |
| Contact Angle (Α) | — | 45 ° | — |
| Distance Between The Apexes Of The Pressure Cones (A) | — | 141 mm | — |
| Temperature range | |||
| Operating temperature min.Tmin | — | -30 °C | — |
| Operating temperature min.Tmin | — | -22 °F | — |
| Operating temperature max.Tmax | — | 150 °C | — |
| Operating temperature max.Tmax | — | 302 °F | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.