Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions verified
“33119” across 2 loaded brands
At least two brands share the same bore, outside diameter and width. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | FAG3311995 × 160 × 49 mm | KOYO33119JR95 × 160 × 49 mm |
|---|---|---|
| Comparable specifications | ||
| Brand | FAG | KOYO |
| Designation | 33119 | 33119JR |
| Product family | — | Single-row / Metric series |
| Detailed type | Tapered roller bearings | Tapered roller bearings |
| Bore diameterd | 95 mm | 95 mm |
| Outside diameterD | 160 mm | 160 mm |
| WidthB | 49 mm | 49 mm |
| Basic dynamic load ratingC | 300 kN | 381 kN |
| Basic static load ratingC0 | 465 kN | 473 kN |
| Fatigue load limitPu | 56 kN | 62.5 kN |
| Reference speednref | 2800 r/min | — |
| Limiting speednG | 4200 r/min | 2300 r/min |
| Mass≈m | 3.95 kg | 3.89 kg |
| Precision class | P6X — Class 6X (ISO 492:2023) | — |
| Cage | Standard — Sheet steel cage, window cage, roller-guided | — |
| Minimum operating temperatureTmin | -30 °C | — |
| Maximum operating temperatureTmax | 120 °C | — |
| Additional information | ||
| Comparative designation to ISO 10317 and ISO 355 | T3EE095 | — |
| Calculation factors | ||
| Limiting value of Fa/Fr for the applicability of diff. Values of factors X and Ye | 0.4 | — |
| Dynamic axial load factorY | 1.51 | — |
| Static axial load factorY0 | 0.83 | — |
| Capabilities & suitability | ||
| Radial load capacity | Yes | — |
| Axial load capacity in one direction | Yes | — |
| Suitable for grease lubrication | Yes | — |
| Suitable for oil lubrication | Yes | — |
| Unsealed design | Yes | — |
| Classification | ||
| Official Category Path | — | Tapered roller bearings - Single-row - Metric series |
| Official Classification 1 | — | Tapered roller bearings / Single-row / Metric series |
| Dimensions | ||
| Minimum chamfer dimension of inner ring back facer1, 2 min | 2.5 mm | — |
| Minimum chamfer dimension of inner ring back facer1, 2 min | 0.098 in | — |
| Minimum chamfer dimension of outer ring back facer3, 4 min | 2 mm | — |
| Minimum chamfer dimension of outer ring back facer3, 4 min | 0.079 in | — |
| Distance between the apexes of the pressure conesa | 38 mm | — |
| Distance between the apexes of the pressure conesa | 1.496 in | — |
| Guidance rib diameter of inner ringd1 | 127.3 mm | — |
| Guidance rib diameter of inner ringd1 | 5.012 in | — |
| Main Dimensions & Performance Data | ||
| Width, inner ringB | 49 mm | — |
| Width, inner ringB | 1.929 in | — |
| Width, outer ringC | 38 mm | — |
| Width, outer ringC | 1.496 in | — |
| Width, totalT | 49 mm | — |
| Width, totalT | 1.929 in | — |
| Basic dynamic load rating, radialCr | 300,000 N | — |
| Basic dynamic load rating, radialCr | 67,446.043 lbf | — |
| Basic static load rating, radialC0r | 465,000 N | — |
| Basic static load rating, radialC0r | 104,541.367 lbf | — |
| Fatigue load limit, radialCur | 56,000 N | — |
| Fatigue load limit, radialCur | 12,589.928 lbf | — |
| Thermal speed ratingnϑr | 2,800 1/min | — |
| Manufacturer Identity | ||
| Schaeffler Product Code | 2268688 | — |
| Official Class Key | — | 050-010-010 |
| Base Type | 33119 | — |
| Product Line Id | 64 | — |
| Base product | 2305091001 | — |
| Bearing X designation | 33119 | — |
| Mounting Manager ID | 33119 | — |
| Grease application ID | 33119 | — |
| Mounting dimensions | ||
| Maximum diameter of shaft shoulderda max | 106 mm | — |
| Maximum diameter of shaft shoulderda max | 4.173 in | — |
| Minimum diameter of shaft shoulderdb min | 105 mm | — |
| Minimum diameter of shaft shoulderdb min | 4.134 in | — |
| Minimum diameter of housing shoulderDa min | 138 mm | — |
| Minimum diameter of housing shoulderDa min | 5.433 in | — |
| Maximum diameter of housing shoulderDa max | 150 mm | — |
| Maximum diameter of housing shoulderDa max | 5.906 in | — |
| Minimum diameter of housing shoulderDb min | 154 mm | — |
| Minimum diameter of housing shoulderDb min | 6.063 in | — |
| Minimum axial spaceCa min | 8 mm | — |
| Minimum axial spaceCa min | 0.315 in | — |
| Minimum axial spaceCb min | 11 mm | — |
| Minimum axial spaceCb min | 0.433 in | — |
| Maximum fillet radius of shaftra max | 2.5 mm | — |
| Maximum fillet radius of shaftra max | 0.098 in | — |
| Maximum fillet radius of housingrb max | 2 mm | — |
| Maximum fillet radius of housingrb max | 0.079 in | — |
| Product characteristics | ||
| Tolerance classP6X | Class 6X (ISO 492:2023) | — |
| Heat treatment | Standard | — |
| Internal design | Standard | — |
| Quality level | Standard | — |
| Number of rows1 | Single-row design | — |
| Product Identity | ||
| Construction | Tapered roller bearings 331, main dimensions acc. to DIN 720, separable | — |
| Short Description | Tapered roller bearing | — |
| Technical Data | ||
| d | — | 160 mm |
| Bore Diameter (D) | 95 mm | — |
| T | — | 49 mm |
| Outside Diameter (D) | 160 mm | — |
| B | — | 49 mm |
| Width (B) | 49 mm | — |
| C | — | 38 mm |
| Basic Dynamic Load Rating, Radial (Cr) | 300,000 N | — |
| R(Min.) | — | 2.5 mm |
| Basic Static Load Rating, Radial (C0R) | 465,000 N | — |
| R1(Min.) | — | 2 mm |
| Operating Temperature Min. (Tmin) | -30 °C | — |
| Basic Load Ratings : Cr | — | 381 kN |
| Limiting Speed (Ng) | 4,200 1/min | — |
| Basic Load Ratings : C0R | — | 473 kN |
| Operating Temperature Max. (Tmax) | 120 °C | — |
| Fatigue Load Limit : Cu | — | 62.5 kN |
| Reference Speed (Nϑr) | 2,800 1/min | — |
| Limiting Speeds(Grease Lub.) | — | 2300 min-1 |
| Maximum Fillet Radius Of Housing (Rb Max) | 2 mm | — |
| Limiting Speeds(Oil Lub.) | — | 3100 min-1 |
| Minimum Chamfer Dimension Of Outer Ring Back Face (R3, 4 M) | 2 mm | — |
| Load Center Spread : A | — | 37.3 mm |
| Minimum Diameter Of Housing Shoulder (Da Min) | 138 mm | — |
| Constant E | — | 0.39 |
| Minimum Diameter Of Housing Shoulder (Db Min) | 154 mm | — |
| Axial Load Factors : Y1 | — | 1.54 |
| Width, Outer Ring (C) | 38 mm | — |
| Axial Load Factors : Y0 | — | 0.85 |
| Fatigue Load Limit, Radial (Cur) | 56,000 N | — |
| Da(Min.) | — | 138 mm |
| Limiting Value Of Fa/Fr For The Applicability Of Diff. Values Of Factors X And Y (E) | 0.4 | — |
| Db(Max.) | — | 106 mm |
| Maximum Diameter Of Shaft Shoulder (Da Max) | 106 mm | — |
| Da(Max.) | — | 150 mm |
| Minimum Diameter Of Shaft Shoulder (Db Min) | 105 mm | — |
| Db(Min.) | — | 154 mm |
| Maximum Diameter Of Housing Shoulder (Da Max) | 150 mm | — |
| Sa(Min.) | — | 8 mm |
| Dynamic Axial Load Factor (Y) | 1.51 | — |
| Sb(Min.) | — | 11 mm |
| Maximum Fillet Radius (Ra Max) | 2.5 mm | — |
| Ra(Max.) | — | 2 mm |
| Minimum Axial Space (Cb Min) | 11 mm | — |
| Rb(Max.) | — | 2 mm |
| Minimum Chamfer Dimension Of Inner Ring Back Face (R1, 2 M) | 2.5 mm | — |
| Mass(Refer.) | — | 3.89 kg |
| Guidance Rib Diameter Of Inner Ring (D1) | 127.3 mm | — |
| Minimum Axial Space (Ca Min) | 8 mm | — |
| Width, Inner Ring (B) | 49 mm | — |
| Static Axial Load Factor (Y0) | 0.83 | — |
| Distance Between The Apexes Of The Pressure Cones (A) | 38 mm | — |
| Temperature range | ||
| Operating temperature min.Tmin | -30 °C | — |
| Operating temperature min.Tmin | -22 °F | — |
| Operating temperature max.Tmax | 120 °C | — |
| Operating temperature max.Tmax | 248 °F | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.