Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Cross Reference centre · Interchange verification checklist · Understand suffix differences
You entered 33020-H. This table explores the base group 33020; it does not preserve or approve every requested suffix. Search your complete marking first →
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions verified
“33020” across 3 loaded brands
At least two brands share the same bore, outside diameter and width. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | FAG33020100 × 150 × 39 mm | TIMKEN33020100 × 150 × 39 mm | KOYO33020JR100 × 150 × 39 mm |
|---|---|---|---|
| Comparable specifications | |||
| Brand | FAG | TIMKEN | KOYO |
| Designation | 33020 | 33020 | 33020JR |
| Product family | — | TS - Tapered Single | Single-row / Metric series |
| Detailed type | Tapered roller bearings | Tapered roller bearings | Tapered roller bearings |
| Series | — | 33020 | — |
| Bore diameterd | 100 mm | 100 mm | 100 mm |
| Outside diameterD | 150 mm | 150 mm | 150 mm |
| WidthB | 39 mm | 39 mm | 39 mm |
| Basic dynamic load ratingC | 225 kN | 297 kN | 290 kN |
| Basic static load ratingC0 | 395 kN | 393 kN | 397 kN |
| Fatigue load limitPu | 48.5 kN | — | 59 kN |
| Reference speednref | 2900 r/min | — | — |
| Limiting speednG | 4450 r/min | — | 2400 r/min |
| Mass≈m | 2.411 kg | 2.35 kg | 2.4 kg |
| Precision class | P6X — Class 6X (ISO 492:2023) | ABMA Class K | — |
| Sealing | — | Open | — |
| Cage | Standard — Sheet steel cage, window cage, roller-guided | Steel cage | — |
| Minimum operating temperatureTmin | -30 °C | — | — |
| Maximum operating temperatureTmax | 120 °C | — | — |
| Additional information | |||
| Comparative designation to ISO 10317 and ISO 355 | T2CE100 | — | — |
| Calculation Factors | |||
| K Factor | — | 2.03 | — |
| Y1 Factor | — | 2.09 | — |
| Y2 Factor | — | 0.00 | — |
| Y0 Factor | — | 1.15 | — |
| E Factor | — | 0.29 | — |
| Cg Factor | — | 0.0882 | — |
| Calculation factors | |||
| Limiting value of Fa/Fr for the applicability of diff. Values of factors X and Ye | 0.29 | — | — |
| Dynamic axial load factorY | 2.09 | — | — |
| Static axial load factorY0 | 1.15 | — | — |
| Capabilities & suitability | |||
| Radial load capacity | Yes | — | — |
| Axial load capacity in one direction | Yes | — | — |
| Suitable for grease lubrication | Yes | — | — |
| Suitable for oil lubrication | Yes | — | — |
| Unsealed design | Yes | — | — |
| Classification | |||
| Official Category Path | — | — | Tapered roller bearings - Single-row - Metric series |
| Official Classification 1 | — | — | Tapered roller bearings / Single-row / Metric series |
| Dimensions | |||
| Minimum chamfer dimension of inner ring back facer1, 2 min | 2 mm | — | — |
| Minimum chamfer dimension of inner ring back facer1, 2 min | 0.079 in | — | — |
| Minimum chamfer dimension of outer ring back facer3, 4 min | 1.5 mm | — | — |
| Minimum chamfer dimension of outer ring back facer3, 4 min | 0.059 in | — | — |
| Distance between the apexes of the pressure conesa | 29 mm | — | — |
| Distance between the apexes of the pressure conesa | 1.142 in | — | — |
| Guidance rib diameter of inner ringd1 | 124.7 mm | — | — |
| Guidance rib diameter of inner ringd1 | 4.909 in | — | — |
| Main Dimensions & Performance Data | |||
| Width, inner ringB | 39 mm | — | — |
| Width, inner ringB | 1.535 in | — | — |
| Width, outer ringC | 32.5 mm | — | — |
| Width, outer ringC | 1.28 in | — | — |
| Width, totalT | 39 mm | — | — |
| Width, totalT | 1.535 in | — | — |
| Basic dynamic load rating, radialCr | 225,000 N | — | — |
| Basic dynamic load rating, radialCr | 50,584.532 lbf | — | — |
| Basic static load rating, radialC0r | 395,000 N | — | — |
| Basic static load rating, radialC0r | 88,803.957 lbf | — | — |
| Fatigue load limit, radialCur | 48,500 N | — | — |
| Fatigue load limit, radialCur | 10,903.777 lbf | — | — |
| Thermal speed ratingnϑr | 2,900 1/min | — | — |
| Manufacturer Identity | |||
| Schaeffler Product Code | 383804 | — | — |
| Material Number | — | 000000000190060261 | — |
| Official Class Key | — | — | 050-010-010 |
| Base Type | 33020 | — | — |
| World Assembly Part Number | — | X33020G_Y33020G | — |
| Old Designation | ["33020.F22"] | — | — |
| Inner Ring Part Number | — | X33020G | — |
| Gpsd Group | F04 | — | — |
| Outer Ring Part Number | — | Y33020G | — |
| Product Line Id | 64 | — | — |
| Drawing Number | — | C-113060 | — |
| X Life Marking | n.r. | — | — |
| Upc | — | 0053893832395 | — |
| Official Source System | — | CORE BP - DS DF | — |
| Official Last Run | — | 2026-08-23T20:02:46.323 | — |
| SAP material number | 0167134000000 | — | — |
| Base product | 2305091001 | — | — |
| Bearing X designation | 33020 | — | — |
| Mounting Manager ID | 33020 | — | — |
| Grease application ID | 33020 | — | — |
| Mounting dimensions | |||
| Maximum diameter of shaft shoulderda max | 108 mm | — | — |
| Maximum diameter of shaft shoulderda max | 4.252 in | — | — |
| Minimum diameter of shaft shoulderdb min | 109 mm | — | — |
| Minimum diameter of shaft shoulderdb min | 4.291 in | — | — |
| Minimum diameter of housing shoulderDa min | 135 mm | — | — |
| Minimum diameter of housing shoulderDa min | 5.315 in | — | — |
| Maximum diameter of housing shoulderDa max | 141 mm | — | — |
| Maximum diameter of housing shoulderDa max | 5.551 in | — | — |
| Minimum diameter of housing shoulderDb min | 143 mm | — | — |
| Minimum diameter of housing shoulderDb min | 5.63 in | — | — |
| Minimum axial spaceCa min | 7 mm | — | — |
| Minimum axial spaceCa min | 0.276 in | — | — |
| Minimum axial spaceCb min | 6.5 mm | — | — |
| Minimum axial spaceCb min | 0.256 in | — | — |
| Maximum fillet radius of shaftra max | 2 mm | — | — |
| Maximum fillet radius of shaftra max | 0.079 in | — | — |
| Maximum fillet radius of housingrb max | 1.5 mm | — | — |
| Maximum fillet radius of housingrb max | 0.059 in | — | — |
| Product characteristics | |||
| Tolerance classP6X | Class 6X (ISO 492:2023) | — | — |
| Heat treatment | Standard | — | — |
| Internal design | Standard | — | — |
| Quality level | Standard | — | — |
| Number of rows1 | Single-row design | — | — |
| Product Identity | |||
| Construction | Tapered roller bearings 330, main dimensions acc. to DIN 720, separable | Single Row Tapered Roller Bearing Assembly | Imperial Series | 3.9370 in Bore | 5.9055 in OD | 1.5354 in Width | Open | Cylindrical Bore | Steel Cage | Precision ABMA Class K | — |
| Type Description | — | TS - Tapered Single | — |
| Short Description | Tapered roller bearing | — | — |
| Number Of Rows | — | 1 | — |
| Tapered Bore | — | N | — |
| Technical Data | |||
| d | — | — | 150 mm |
| T | — | — | 39 mm |
| B | — | — | 39 mm |
| C | — | — | 32.5 mm |
| Bore Diameter (D) | 100 mm | — | — |
| Overall Width | — | 43.300 mm | — |
| R(Min.) | — | — | 2 mm |
| Outside Diameter (D) | 150 mm | — | — |
| Radial Rating | — | 77,000 N | — |
| R1(Min.) | — | — | 1.5 mm |
| Width (B) | 39 mm | — | — |
| Axial Rating | — | 37,800 N | — |
| Basic Load Ratings : Cr | — | — | 290 kN |
| Basic Dynamic Load Rating, Radial (Cr) | 225,000 N | — | — |
| Dynamic Rating C1 | — | 297,000 N | — |
| Basic Load Ratings : C0R | — | — | 397 kN |
| Basic Static Load Rating, Radial (C0R) | 395,000 N | — | — |
| Dynamic Rating C90 | — | 77,000 N | — |
| Fatigue Load Limit : Cu | — | — | 59.0 kN |
| Operating Temperature Min. (Tmin) | -30 °C | — | — |
| Dynamic Axial Rating Ca90 | — | 37,800 N | — |
| Limiting Speeds(Grease Lub.) | — | — | 2400 min-1 |
| Limiting Speed (Ng) | 4,450 1/min | — | — |
| Dynamic Axial Rating Ca1 | — | 146,000 N | — |
| Limiting Speeds(Oil Lub.) | — | — | 3200 min-1 |
| Operating Temperature Max. (Tmax) | 120 °C | — | — |
| Static Radial Rating C0 | — | 393,000 N | — |
| Load Center Spread : A | — | — | 28.6 mm |
| Reference Speed (Nϑr) | 2,900 1/min | — | — |
| Extended Dynamic Rating Ce | — | 0 N | — |
| Constant E | — | — | 0.29 |
| Maximum Fillet Radius Of Housing (Rb Max) | 1.5 mm | — | — |
| Static Axial Rating C0A | — | 328,000 N | — |
| Axial Load Factors : Y1 | — | — | 2.09 |
| Minimum Chamfer Dimension Of Outer Ring Back Face (R3, 4 M) | 1.5 mm | — | — |
| Axial Load Factors : Y0 | — | — | 1.15 |
| Minimum Diameter Of Housing Shoulder (Da Min) | 135 mm | — | — |
| Da(Min.) | — | — | 135 mm |
| Minimum Diameter Of Housing Shoulder (Db Min) | 143 mm | — | — |
| Db(Max.) | — | — | 108 mm |
| Width, Outer Ring (C) | 32.5 mm | — | — |
| Da(Max.) | — | — | 141 mm |
| Fatigue Load Limit, Radial (Cur) | 48,500 N | — | — |
| Db(Min.) | — | — | 143 mm |
| Limiting Value Of Fa/Fr For The Applicability Of Diff. Values Of Factors X And Y (E) | 0.29 | — | — |
| Sa(Min.) | — | — | 7 mm |
| Maximum Diameter Of Shaft Shoulder (Da Max) | 108 mm | — | — |
| Sb(Min.) | — | — | 6.5 mm |
| Minimum Diameter Of Shaft Shoulder (Db Min) | 109 mm | — | — |
| Ra(Max.) | — | — | 2 mm |
| Maximum Diameter Of Housing Shoulder (Da Max) | 141 mm | — | — |
| Rb(Max.) | — | — | 1.5 mm |
| Dynamic Axial Load Factor (Y) | 2.09 | — | — |
| Mass(Refer.) | — | — | 2.40 kg |
| Maximum Fillet Radius (Ra Max) | 2 mm | — | — |
| Minimum Axial Space (Cb Min) | 6.5 mm | — | — |
| Minimum Chamfer Dimension Of Inner Ring Back Face (R1, 2 M) | 2 mm | — | — |
| Guidance Rib Diameter Of Inner Ring (D1) | 124.7 mm | — | — |
| Minimum Axial Space (Ca Min) | 7 mm | — | — |
| Width, Inner Ring (B) | 39 mm | — | — |
| Static Axial Load Factor (Y0) | 1.15 | — | — |
| Distance Between The Apexes Of The Pressure Cones (A) | 29 mm | — | — |
| Temperature range | |||
| Operating temperature min.Tmin | -30 °C | — | — |
| Operating temperature min.Tmin | -22 °F | — | — |
| Operating temperature max.Tmax | 120 °C | — | — |
| Operating temperature max.Tmax | 248 °F | — | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.