Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions verified
“32968” across 3 loaded brands
At least two brands share the same bore, outside diameter and width. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | FAG32968-XL340 × 460 × 76 mm | TIMKEN32968340 × 460 × 76 mm | KOYO32968JR340 × 460 × 76 mm |
|---|---|---|---|
| Comparable specifications | |||
| Brand | FAG | TIMKEN | KOYO |
| Designation | 32968-XL | 32968 | 32968JR |
| Product family | — | TS - Tapered Single | Single-row / Metric series |
| Detailed type | Tapered roller bearings | Tapered roller bearings | Tapered roller bearings |
| Series | 32968 | 32968 | — |
| Bore diameterd | 340 mm | 340 mm | 340 mm |
| Outside diameterD | 460 mm | 460 mm | 460 mm |
| WidthB | 76 mm | 76 mm | 76 mm |
| Basic dynamic load ratingC | 1270 kN | 1220 kN | 1340 kN |
| Basic static load ratingC0 | 2370 kN | 2640 kN | 2340 kN |
| Fatigue load limitPu | 275 kN | — | 229 kN |
| Reference speednref | 690 r/min | — | — |
| Limiting speednG | 1650 r/min | — | 590 r/min |
| Mass≈m | 35 kg | 34.45 kg | 35.6 kg |
| Precision class | PN — Normal (ISO 492:2023) | ABMA Class K | — |
| Sealing | — | Open | — |
| Cage | Standard — Sheet steel cage, window cage, roller-guided | Steel cage | — |
| Minimum operating temperatureTmin | -30 °C | — | — |
| Maximum operating temperatureTmax | 200 °C | — | — |
| Additional information | |||
| Comparative designation to ISO 10317 and ISO 355 | T4FD340 | — | — |
| Calculation Factors | |||
| K Factor | — | 1.34 | — |
| Y1 Factor | — | 1.37 | — |
| Y2 Factor | — | 0.00 | — |
| Y0 Factor | — | 0.75 | — |
| E Factor | — | 0.44 | — |
| Cg Factor | — | 0.1967 | — |
| Calculation factors | |||
| Limiting value of Fa/Fr for the applicability of diff. Values of factors X and Ye | 0.44 | — | — |
| Dynamic axial load factorY | 1.37 | — | — |
| Static axial load factorY0 | 0.75 | — | — |
| Capabilities & suitability | |||
| Radial load capacity | Yes | — | — |
| Axial load capacity in one direction | Yes | — | — |
| Suitable for grease lubrication | Yes | — | — |
| Suitable for oil lubrication | Yes | — | — |
| Unsealed design | Yes | — | — |
| Largebearing | Yes | — | — |
| Classification | |||
| Official Category Path | — | — | Tapered roller bearings - Single-row - Metric series |
| Official Classification 1 | — | — | Tapered roller bearings / Single-row / Metric series |
| Dimensions | |||
| Minimum chamfer dimension of inner ring back facer1, 2 min | 4 mm | — | — |
| Minimum chamfer dimension of inner ring back facer1, 2 min | 0.157 in | — | — |
| Minimum chamfer dimension of outer ring back facer3, 4 min | 3 mm | — | — |
| Minimum chamfer dimension of outer ring back facer3, 4 min | 0.118 in | — | — |
| Distance between the apexes of the pressure conesa | 91 mm | — | — |
| Distance between the apexes of the pressure conesa | 3.583 in | — | — |
| Guidance rib diameter of inner ringd1 | 399 mm | — | — |
| Guidance rib diameter of inner ringd1 | 15.709 in | — | — |
| Main Dimensions & Performance Data | |||
| Width, inner ringB | 76 mm | — | — |
| Width, inner ringB | 2.992 in | — | — |
| Width, outer ringC | 57 mm | — | — |
| Width, outer ringC | 2.244 in | — | — |
| Width, totalT | 76 mm | — | — |
| Width, totalT | 2.992 in | — | — |
| Basic dynamic load rating, radialCr | 1,270,000 N | — | — |
| Basic dynamic load rating, radialCr | 285,521.583 lbf | — | — |
| Basic static load rating, radialC0r | 2,370,000 N | — | — |
| Basic static load rating, radialC0r | 532,823.741 lbf | — | — |
| Fatigue load limit, radialCur | 275,000 N | — | — |
| Fatigue load limit, radialCur | 61,825.54 lbf | — | — |
| Thermal speed ratingnϑr | 690 1/min | — | — |
| Manufacturer Identity | |||
| Schaeffler Product Code | 383778 | — | — |
| Material Number | — | 000000000100206573 | — |
| Official Class Key | — | — | 050-010-010 |
| Base Type | 32968 | — | — |
| World Assembly Part Number | — | X32968M_Y32968M | — |
| Old Designation | ["32968"] | — | — |
| Inner Ring Part Number | — | X32968M | — |
| Gpsd Group | F04 | — | — |
| Outer Ring Part Number | — | Y32968M | — |
| Product Line Id | 70 | — | — |
| Drawing Number | — | C-53658 | — |
| X Life Marking | XL | — | — |
| Upc | — | 0053893982342 | — |
| Official Source System | — | CORE BP - DS DF | — |
| Official Last Run | — | 2026-08-23T20:02:48.493 | — |
| SAP material number | 0774231510000 | — | — |
| Base product | 2305091001 | — | — |
| Bearing X designation | 32968-XL | — | — |
| Mounting Manager ID | 32968-XL | — | — |
| Grease application ID | 32968-XL | — | — |
| Mounting dimensions | |||
| Maximum diameter of shaft shoulderda max | 361 mm | — | — |
| Maximum diameter of shaft shoulderda max | 14.213 in | — | — |
| Minimum diameter of shaft shoulderdb min | 354 mm | — | — |
| Minimum diameter of shaft shoulderdb min | 13.937 in | — | — |
| Minimum diameter of housing shoulderDa min | 421 mm | — | — |
| Minimum diameter of housing shoulderDa min | 16.575 in | — | — |
| Maximum diameter of housing shoulderDa max | 446 mm | — | — |
| Maximum diameter of housing shoulderDa max | 17.559 in | — | — |
| Minimum diameter of housing shoulderDb min | 446 mm | — | — |
| Minimum diameter of housing shoulderDb min | 17.559 in | — | — |
| Minimum axial spaceCa min | 12 mm | — | — |
| Minimum axial spaceCa min | 0.472 in | — | — |
| Minimum axial spaceCb min | 19 mm | — | — |
| Minimum axial spaceCb min | 0.748 in | — | — |
| Maximum fillet radius of shaftra max | 4 mm | — | — |
| Maximum fillet radius of shaftra max | 0.157 in | — | — |
| Maximum fillet radius of housingrb max | 3 mm | — | — |
| Maximum fillet radius of housingrb max | 0.118 in | — | — |
| Product characteristics | |||
| Tolerance classPN | Normal (ISO 492:2023) | — | — |
| Heat treatment | Standard | — | — |
| Internal design | Standard | — | — |
| Quality levelXL | X-life | — | — |
| Number of rows1 | Single-row design | — | — |
| Product Identity | |||
| Construction | Tapered roller bearings 329, main dimensions acc. to DIN 720, separable | Single Row Tapered Roller Bearing Assembly | Imperial Series | 13.3858 in Bore | 18.1102 in OD | 2.9921 in Width | Open | Cylindrical Bore | Steel Cage | Precision ABMA Class K | — |
| Type Description | — | TS - Tapered Single | — |
| Short Description | Tapered roller bearing | — | — |
| Number Of Rows | — | 1 | — |
| Tapered Bore | — | N | — |
| Technical Data | |||
| d | — | — | 460 mm |
| T | — | — | 76 mm |
| B | — | — | 76 mm |
| C | — | — | 57 mm |
| Bore Diameter (D) | 340 mm | — | — |
| Overall Width | — | 90.700 mm | — |
| R(Min.) | — | — | 4 mm |
| Outside Diameter (D) | 460 mm | — | — |
| Radial Rating | — | 316,000 N | — |
| R1(Min.) | — | — | 3 mm |
| Width (B) | 76 mm | — | — |
| Axial Rating | — | 237,000 N | — |
| Basic Load Ratings : Cr | — | — | 1340 kN |
| Basic Dynamic Load Rating, Radial (Cr) | 1,270,000 N | — | — |
| Dynamic Rating C1 | — | 1,220,000 N | — |
| Basic Load Ratings : C0R | — | — | 2340 kN |
| Basic Static Load Rating, Radial (C0R) | 2,370,000 N | — | — |
| Dynamic Rating C90 | — | 316,000 N | — |
| Fatigue Load Limit : Cu | — | — | 229 kN |
| Operating Temperature Min. (Tmin) | -30 °C | — | — |
| Dynamic Axial Rating Ca90 | — | 237,000 N | — |
| Limiting Speeds(Grease Lub.) | — | — | 590 min-1 |
| Limiting Speed (Ng) | 1,650 1/min | — | — |
| Dynamic Axial Rating Ca1 | — | 912,000 N | — |
| Limiting Speeds(Oil Lub.) | — | — | 790 min-1 |
| Operating Temperature Max. (Tmax) | 200 °C | — | — |
| Static Radial Rating C0 | — | 2,640,000 N | — |
| Load Center Spread : A | — | — | 90.5 mm |
| Reference Speed (Nϑr) | 690 1/min | — | — |
| Extended Dynamic Rating Ce | — | 0 N | — |
| Constant E | — | — | 0.44 |
| Maximum Fillet Radius Of Housing (Rb Max) | 3 mm | — | — |
| Static Axial Rating C0A | — | 3,360,000 N | — |
| Axial Load Factors : Y1 | — | — | 1.37 |
| Minimum Chamfer Dimension Of Outer Ring Back Face (R3, 4 M) | 3 mm | — | — |
| Axial Load Factors : Y0 | — | — | 0.75 |
| Minimum Diameter Of Housing Shoulder (Da Min) | 421 mm | — | — |
| Da(Min.) | — | — | 420 mm |
| Minimum Diameter Of Housing Shoulder (Db Min) | 446 mm | — | — |
| Db(Max.) | — | — | 361 mm |
| Width, Outer Ring (C) | 57 mm | — | — |
| Da(Max.) | — | — | 446 mm |
| Fatigue Load Limit, Radial (Cur) | 275,000 N | — | — |
| Db(Min.) | — | — | 446 mm |
| Limiting Value Of Fa/Fr For The Applicability Of Diff. Values Of Factors X And Y (E) | 0.44 | — | — |
| Sa(Min.) | — | — | 12 mm |
| Maximum Diameter Of Shaft Shoulder (Da Max) | 361 mm | — | — |
| Sb(Min.) | — | — | 19 mm |
| Minimum Diameter Of Shaft Shoulder (Db Min) | 354 mm | — | — |
| Ra(Max.) | — | — | 3 mm |
| Maximum Diameter Of Housing Shoulder (Da Max) | 446 mm | — | — |
| Rb(Max.) | — | — | 2.5 mm |
| Dynamic Axial Load Factor (Y) | 1.37 | — | — |
| Mass(Refer.) | — | — | 35.6 kg |
| Maximum Fillet Radius (Ra Max) | 4 mm | — | — |
| Minimum Axial Space (Cb Min) | 19 mm | — | — |
| Minimum Chamfer Dimension Of Inner Ring Back Face (R1, 2 M) | 4 mm | — | — |
| Guidance Rib Diameter Of Inner Ring (D1) | 399 mm | — | — |
| Minimum Axial Space (Ca Min) | 12 mm | — | — |
| Width, Inner Ring (B) | 76 mm | — | — |
| Static Axial Load Factor (Y0) | 0.75 | — | — |
| Distance Between The Apexes Of The Pressure Cones (A) | 91 mm | — | — |
| Temperature range | |||
| Operating temperature min.Tmin | -30 °C | — | — |
| Operating temperature min.Tmin | -22 °F | — | — |
| Operating temperature max.Tmax | 200 °C | — | — |
| Operating temperature max.Tmax | 392 °F | — | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.