Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions verified
“32922” across 3 loaded brands
At least two brands share the same bore, outside diameter and width. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | FAG32922110 × 150 × 25 mm | TIMKEN32922110 × 150 × 25 mm | KOYO32922JR110 × 150 × 25 mm |
|---|---|---|---|
| Comparable specifications | |||
| Brand | FAG | TIMKEN | KOYO |
| Designation | 32922 | 32922 | 32922JR |
| Product family | — | TS - Tapered Single | Single-row / Metric series |
| Detailed type | Tapered roller bearings | Tapered roller bearings | Tapered roller bearings |
| Series | — | 32922 | — |
| Bore diameterd | 110 mm | 110 mm | 110 mm |
| Outside diameterD | 150 mm | 150 mm | 150 mm |
| WidthB | 25 mm | 25 mm | 25 mm |
| Basic dynamic load ratingC | 133 kN | 165 kN | 162 kN |
| Basic static load ratingC0 | 231 kN | 231 kN | 231 kN |
| Fatigue load limitPu | 27 kN | — | 33.3 kN |
| Reference speednref | 2500 r/min | — | — |
| Limiting speednG | 4550 r/min | — | 2300 r/min |
| Mass≈m | 1.265 kg | 1.23 kg | 1.28 kg |
| Precision class | P6X — Class 6X (ISO 492:2023) | ABMA Class N | — |
| Sealing | — | Open | — |
| Cage | Standard — Sheet steel cage, window cage, roller-guided | Steel cage | — |
| Minimum operating temperatureTmin | -30 °C | — | — |
| Maximum operating temperatureTmax | 120 °C | — | — |
| Additional information | |||
| Comparative designation to ISO 10317 and ISO 355 | T2CC110 | — | — |
| Calculation Factors | |||
| K Factor | — | 1.64 | — |
| Y1 Factor | — | 1.69 | — |
| Y2 Factor | — | 0.00 | — |
| Y0 Factor | — | 0.93 | — |
| E Factor | — | 0.36 | — |
| Cg Factor | — | 0.1217 | — |
| Calculation factors | |||
| Limiting value of Fa/Fr for the applicability of diff. Values of factors X and Ye | 0.36 | — | — |
| Dynamic axial load factorY | 1.69 | — | — |
| Static axial load factorY0 | 0.93 | — | — |
| Capabilities & suitability | |||
| Radial load capacity | Yes | — | — |
| Axial load capacity in one direction | Yes | — | — |
| Suitable for grease lubrication | Yes | — | — |
| Suitable for oil lubrication | Yes | — | — |
| Unsealed design | Yes | — | — |
| Classification | |||
| Official Category Path | — | — | Tapered roller bearings - Single-row - Metric series |
| Official Classification 1 | — | — | Tapered roller bearings / Single-row / Metric series |
| Dimensions | |||
| Minimum chamfer dimension of inner ring back facer1, 2 min | 1.5 mm | — | — |
| Minimum chamfer dimension of inner ring back facer1, 2 min | 0.059 in | — | — |
| Minimum chamfer dimension of outer ring back facer3, 4 min | 1.5 mm | — | — |
| Minimum chamfer dimension of outer ring back facer3, 4 min | 0.059 in | — | — |
| Distance between the apexes of the pressure conesa | 26 mm | — | — |
| Distance between the apexes of the pressure conesa | 1.024 in | — | — |
| Guidance rib diameter of inner ringd1 | 130.2 mm | — | — |
| Guidance rib diameter of inner ringd1 | 5.126 in | — | — |
| Main Dimensions & Performance Data | |||
| Width, inner ringB | 25 mm | — | — |
| Width, inner ringB | 0.984 in | — | — |
| Width, outer ringC | 20 mm | — | — |
| Width, outer ringC | 0.787 in | — | — |
| Width, totalT | 25 mm | — | — |
| Width, totalT | 0.984 in | — | — |
| Basic dynamic load rating, radialCr | 133,000 N | — | — |
| Basic dynamic load rating, radialCr | 29,901.079 lbf | — | — |
| Basic static load rating, radialC0r | 231,000 N | — | — |
| Basic static load rating, radialC0r | 51,933.453 lbf | — | — |
| Fatigue load limit, radialCur | 27,000 N | — | — |
| Fatigue load limit, radialCur | 6,070.144 lbf | — | — |
| Thermal speed ratingnϑr | 2,500 1/min | — | — |
| Manufacturer Identity | |||
| Schaeffler Product Code | 383746 | — | — |
| Material Number | — | 000000000190052696 | — |
| Official Class Key | — | — | 050-010-010 |
| Base Type | 32922 | — | — |
| World Assembly Part Number | — | X32922G_Y32922G | — |
| Gpsd Group | F04 | — | — |
| Inner Ring Part Number | — | X32922G | — |
| Product Line Id | 64 | — | — |
| Outer Ring Part Number | — | Y32922G | — |
| X Life Marking | n.r. | — | — |
| Drawing Number | — | C-109414 | — |
| Upc | — | 0053893818580 | — |
| Official Source System | — | CORE BP - DS DF | — |
| Official Last Run | — | 2026-08-23T20:02:47.383 | — |
| SAP material number | 0190566800000 | — | — |
| Base product | 2305091001 | — | — |
| Bearing X designation | 32922 | — | — |
| Mounting Manager ID | 32922 | — | — |
| Grease application ID | 32922 | — | — |
| Mounting dimensions | |||
| Maximum diameter of shaft shoulderda max | 118 mm | — | — |
| Maximum diameter of shaft shoulderda max | 4.646 in | — | — |
| Minimum diameter of shaft shoulderdb min | 117 mm | — | — |
| Minimum diameter of shaft shoulderdb min | 4.606 in | — | — |
| Minimum diameter of housing shoulderDa min | 140 mm | — | — |
| Minimum diameter of housing shoulderDa min | 5.512 in | — | — |
| Maximum diameter of housing shoulderDa max | 141 mm | — | — |
| Maximum diameter of housing shoulderDa max | 5.551 in | — | — |
| Minimum diameter of housing shoulderDb min | 145 mm | — | — |
| Minimum diameter of housing shoulderDb min | 5.709 in | — | — |
| Minimum axial spaceCa min | 5 mm | — | — |
| Minimum axial spaceCa min | 0.197 in | — | — |
| Minimum axial spaceCb min | 5 mm | — | — |
| Minimum axial spaceCb min | 0.197 in | — | — |
| Maximum fillet radius of shaftra max | 1.5 mm | — | — |
| Maximum fillet radius of shaftra max | 0.059 in | — | — |
| Maximum fillet radius of housingrb max | 1.5 mm | — | — |
| Maximum fillet radius of housingrb max | 0.059 in | — | — |
| Product characteristics | |||
| Tolerance classP6X | Class 6X (ISO 492:2023) | — | — |
| Heat treatment | Standard | — | — |
| Internal design | Standard | — | — |
| Quality level | Standard | — | — |
| Number of rows1 | Single-row design | — | — |
| Product Identity | |||
| Construction | Tapered roller bearings 329, main dimensions acc. to DIN 720, separable | Single Row Tapered Roller Bearing Assembly | Imperial Series | 4.3307 in Bore | 5.9055 in OD | 0.9843 in Width | Open | Cylindrical Bore | Steel Cage | Precision ABMA Class N | — |
| Short Description | Tapered roller bearing | — | — |
| Type Description | — | TS - Tapered Single | — |
| Number Of Rows | — | 1 | — |
| Tapered Bore | — | N | — |
| Technical Data | |||
| d | — | — | 150 mm |
| T | — | — | 25 mm |
| B | — | — | 25 mm |
| Bore Diameter (D) | 110 mm | — | — |
| C | — | — | 20 mm |
| Outside Diameter (D) | 150 mm | — | — |
| Overall Width | — | 29.000 mm | — |
| R(Min.) | — | — | 1.5 mm |
| Width (B) | 25 mm | — | — |
| Radial Rating | — | 42,800 N | — |
| R1(Min.) | — | — | 1.5 mm |
| Basic Dynamic Load Rating, Radial (Cr) | 133,000 N | — | — |
| Axial Rating | — | 26,100 N | — |
| Basic Load Ratings : Cr | — | — | 162 kN |
| Basic Static Load Rating, Radial (C0R) | 231,000 N | — | — |
| Dynamic Rating C1 | — | 165,000 N | — |
| Basic Load Ratings : C0R | — | — | 231 kN |
| Operating Temperature Min. (Tmin) | -30 °C | — | — |
| Dynamic Rating C90 | — | 42,800 N | — |
| Fatigue Load Limit : Cu | — | — | 33.3 kN |
| Limiting Speed (Ng) | 4,550 1/min | — | — |
| Dynamic Axial Rating Ca90 | — | 26,100 N | — |
| Limiting Speeds(Grease Lub.) | — | — | 2300 min-1 |
| Operating Temperature Max. (Tmax) | 120 °C | — | — |
| Dynamic Axial Rating Ca1 | — | 101,000 N | — |
| Limiting Speeds(Oil Lub.) | — | — | 3000 min-1 |
| Reference Speed (Nϑr) | 2,500 1/min | — | — |
| Static Radial Rating C0 | — | 231,000 N | — |
| Load Center Spread : A | — | — | 26.3 mm |
| Maximum Fillet Radius Of Housing (Rb Max) | 1.5 mm | — | — |
| Extended Dynamic Rating Ce | — | 0 N | — |
| Constant E | — | — | 0.36 |
| Minimum Chamfer Dimension Of Outer Ring Back Face (R3, 4 M) | 1.5 mm | — | — |
| Static Axial Rating C0A | — | 239,000 N | — |
| Axial Load Factors : Y1 | — | — | 1.69 |
| Minimum Diameter Of Housing Shoulder (Da Min) | 140 mm | — | — |
| Axial Load Factors : Y0 | — | — | 0.93 |
| Minimum Diameter Of Housing Shoulder (Db Min) | 145 mm | — | — |
| Da(Min.) | — | — | 138 mm |
| Width, Outer Ring (C) | 20 mm | — | — |
| Db(Max.) | — | — | 118 mm |
| Fatigue Load Limit, Radial (Cur) | 27,000 N | — | — |
| Da(Max.) | — | — | 141 mm |
| Limiting Value Of Fa/Fr For The Applicability Of Diff. Values Of Factors X And Y (E) | 0.36 | — | — |
| Db(Min.) | — | — | 145 mm |
| Maximum Diameter Of Shaft Shoulder (Da Max) | 118 mm | — | — |
| Sa(Min.) | — | — | 5 mm |
| Minimum Diameter Of Shaft Shoulder (Db Min) | 117 mm | — | — |
| Sb(Min.) | — | — | 5 mm |
| Maximum Diameter Of Housing Shoulder (Da Max) | 141 mm | — | — |
| Ra(Max.) | — | — | 1.5 mm |
| Dynamic Axial Load Factor (Y) | 1.69 | — | — |
| Rb(Max.) | — | — | 1.5 mm |
| Maximum Fillet Radius (Ra Max) | 1.5 mm | — | — |
| Mass(Refer.) | — | — | 1.28 kg |
| Minimum Axial Space (Cb Min) | 5 mm | — | — |
| Minimum Chamfer Dimension Of Inner Ring Back Face (R1, 2 M) | 1.5 mm | — | — |
| Guidance Rib Diameter Of Inner Ring (D1) | 130.2 mm | — | — |
| Minimum Axial Space (Ca Min) | 5 mm | — | — |
| Width, Inner Ring (B) | 25 mm | — | — |
| Static Axial Load Factor (Y0) | 0.93 | — | — |
| Distance Between The Apexes Of The Pressure Cones (A) | 26 mm | — | — |
| Temperature range | |||
| Operating temperature min.Tmin | -30 °C | — | — |
| Operating temperature min.Tmin | -22 °F | — | — |
| Operating temperature max.Tmax | 120 °C | — | — |
| Operating temperature max.Tmax | 248 °F | — | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.