Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions verified
“32916” across 2 loaded brands
At least two brands share the same bore, outside diameter and width. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | FAG3291680 × 110 × 20 mm | KOYO32916JR80 × 110 × 20 mm |
|---|---|---|
| Comparable specifications | ||
| Brand | FAG | KOYO |
| Designation | 32916 | 32916JR |
| Product family | — | Single-row / Metric series |
| Detailed type | Tapered roller bearings | Tapered roller bearings |
| Bore diameterd | 80 mm | 80 mm |
| Outside diameterD | 110 mm | 110 mm |
| WidthB | 20 mm | 20 mm |
| Basic dynamic load ratingC | 77 kN | 95.1 kN |
| Basic static load ratingC0 | 132 kN | 131 kN |
| Fatigue load limitPu | 15.7 kN | 19.5 kN |
| Reference speednref | 3350 r/min | — |
| Limiting speednG | 6300 r/min | 3100 r/min |
| Mass≈m | 0.571 kg | 0.556 kg |
| Precision class | P6X — Class 6X (ISO 492:2023) | — |
| Cage | Standard — Sheet steel cage, window cage, roller-guided | — |
| Minimum operating temperatureTmin | -30 °C | — |
| Maximum operating temperatureTmax | 120 °C | — |
| Additional information | ||
| Comparative designation to ISO 10317 and ISO 355 | T2BC080 | — |
| Calculation factors | ||
| Limiting value of Fa/Fr for the applicability of diff. Values of factors X and Ye | 0.35 | — |
| Dynamic axial load factorY | 1.71 | — |
| Static axial load factorY0 | 0.94 | — |
| Capabilities & suitability | ||
| Radial load capacity | Yes | — |
| Axial load capacity in one direction | Yes | — |
| Suitable for grease lubrication | Yes | — |
| Suitable for oil lubrication | Yes | — |
| Unsealed design | Yes | — |
| Classification | ||
| Official Category Path | — | Tapered roller bearings - Single-row - Metric series |
| Official Classification 1 | — | Tapered roller bearings / Single-row / Metric series |
| Dimensions | ||
| Minimum chamfer dimension of inner ring back facer1, 2 min | 1 mm | — |
| Minimum chamfer dimension of inner ring back facer1, 2 min | 0.039 in | — |
| Minimum chamfer dimension of outer ring back facer3, 4 min | 1 mm | — |
| Minimum chamfer dimension of outer ring back facer3, 4 min | 0.039 in | — |
| Distance between the apexes of the pressure conesa | 20 mm | — |
| Distance between the apexes of the pressure conesa | 0.787 in | — |
| Guidance rib diameter of inner ringd1 | 96.1 mm | — |
| Guidance rib diameter of inner ringd1 | 3.783 in | — |
| Main Dimensions & Performance Data | ||
| Width, inner ringB | 20 mm | — |
| Width, inner ringB | 0.787 in | — |
| Width, outer ringC | 16 mm | — |
| Width, outer ringC | 0.63 in | — |
| Width, totalT | 20 mm | — |
| Width, totalT | 0.787 in | — |
| Basic dynamic load rating, radialCr | 77,000 N | — |
| Basic dynamic load rating, radialCr | 17,311.151 lbf | — |
| Basic static load rating, radialC0r | 132,000 N | — |
| Basic static load rating, radialC0r | 29,676.259 lbf | — |
| Fatigue load limit, radialCur | 15,700 N | — |
| Fatigue load limit, radialCur | 3,529.676 lbf | — |
| Thermal speed ratingnϑr | 3,350 1/min | — |
| Manufacturer Identity | ||
| Schaeffler Product Code | 1210948 | — |
| Official Class Key | — | 050-010-010 |
| Base Type | 32916 | — |
| Gpsd Group | F04 | — |
| Product Line Id | 36 | — |
| SAP material number | 0396443320000 | — |
| Base product | 2305091001 | — |
| Bearing X designation | 32916 | — |
| Mounting Manager ID | 32916 | — |
| Grease application ID | 32916 | — |
| Mounting dimensions | ||
| Maximum diameter of shaft shoulderda max | 86 mm | — |
| Maximum diameter of shaft shoulderda max | 3.386 in | — |
| Minimum diameter of shaft shoulderdb min | 86 mm | — |
| Minimum diameter of shaft shoulderdb min | 3.386 in | — |
| Minimum diameter of housing shoulderDa min | 102 mm | — |
| Minimum diameter of housing shoulderDa min | 4.016 in | — |
| Maximum diameter of housing shoulderDa max | 104 mm | — |
| Maximum diameter of housing shoulderDa max | 4.094 in | — |
| Minimum diameter of housing shoulderDb min | 106 mm | — |
| Minimum diameter of housing shoulderDb min | 4.173 in | — |
| Minimum axial spaceCa min | 4 mm | — |
| Minimum axial spaceCa min | 0.157 in | — |
| Minimum axial spaceCb min | 4 mm | — |
| Minimum axial spaceCb min | 0.157 in | — |
| Maximum fillet radius of shaftra max | 1 mm | — |
| Maximum fillet radius of shaftra max | 0.039 in | — |
| Maximum fillet radius of housingrb max | 1 mm | — |
| Maximum fillet radius of housingrb max | 0.039 in | — |
| Product characteristics | ||
| Tolerance classP6X | Class 6X (ISO 492:2023) | — |
| Heat treatment | Standard | — |
| Internal design | Standard | — |
| Quality level | Standard | — |
| Number of rows1 | Single-row design | — |
| Product Identity | ||
| Construction | Tapered roller bearings 329, main dimensions acc. to DIN 720, separable | — |
| Short Description | Tapered roller bearing | — |
| Technical Data | ||
| d | — | 110 mm |
| T | — | 20 mm |
| Bore Diameter (D) | 80 mm | — |
| B | — | 20 mm |
| Outside Diameter (D) | 110 mm | — |
| C | — | 16 mm |
| Width (B) | 20 mm | — |
| R(Min.) | — | 1 mm |
| Basic Dynamic Load Rating, Radial (Cr) | 77,000 N | — |
| R1(Min.) | — | 1 mm |
| Basic Static Load Rating, Radial (C0R) | 132,000 N | — |
| Basic Load Ratings : Cr | — | 95.1 kN |
| Operating Temperature Min. (Tmin) | -30 °C | — |
| Basic Load Ratings : C0R | — | 131 kN |
| Limiting Speed (Ng) | 6,300 1/min | — |
| Fatigue Load Limit : Cu | — | 19.5 kN |
| Operating Temperature Max. (Tmax) | 120 °C | — |
| Limiting Speeds(Grease Lub.) | — | 3100 min-1 |
| Reference Speed (Nϑr) | 3,350 1/min | — |
| Limiting Speeds(Oil Lub.) | — | 4200 min-1 |
| Maximum Fillet Radius Of Housing (Rb Max) | 1 mm | — |
| Load Center Spread : A | — | 20.1 mm |
| Minimum Chamfer Dimension Of Outer Ring Back Face (R3, 4 M) | 1 mm | — |
| Constant E | — | 0.35 |
| Minimum Diameter Of Housing Shoulder (Da Min) | 102 mm | — |
| Axial Load Factors : Y1 | — | 1.71 |
| Minimum Diameter Of Housing Shoulder (Db Min) | 106 mm | — |
| Axial Load Factors : Y0 | — | 0.94 |
| Width, Outer Ring (C) | 16 mm | — |
| Da(Min.) | — | 101 mm |
| Fatigue Load Limit, Radial (Cur) | 15,700 N | — |
| Db(Max.) | — | 86 mm |
| Limiting Value Of Fa/Fr For The Applicability Of Diff. Values Of Factors X And Y (E) | 0.35 | — |
| Da(Max.) | — | 104.5 mm |
| Maximum Diameter Of Shaft Shoulder (Da Max) | 86 mm | — |
| Db(Min.) | — | 106 mm |
| Minimum Diameter Of Shaft Shoulder (Db Min) | 86 mm | — |
| Sa(Min.) | — | 4 mm |
| Maximum Diameter Of Housing Shoulder (Da Max) | 104 mm | — |
| Sb(Min.) | — | 4 mm |
| Dynamic Axial Load Factor (Y) | 1.71 | — |
| Ra(Max.) | — | 1 mm |
| Maximum Fillet Radius (Ra Max) | 1 mm | — |
| Rb(Max.) | — | 1 mm |
| Minimum Axial Space (Cb Min) | 4 mm | — |
| Mass(Refer.) | — | 0.556 kg |
| Minimum Chamfer Dimension Of Inner Ring Back Face (R1, 2 M) | 1 mm | — |
| Guidance Rib Diameter Of Inner Ring (D1) | 96.1 mm | — |
| Minimum Axial Space (Ca Min) | 4 mm | — |
| Width, Inner Ring (B) | 20 mm | — |
| Static Axial Load Factor (Y0) | 0.94 | — |
| Distance Between The Apexes Of The Pressure Cones (A) | 20 mm | — |
| Temperature range | ||
| Operating temperature min.Tmin | -30 °C | — |
| Operating temperature min.Tmin | -22 °F | — |
| Operating temperature max.Tmax | 120 °C | — |
| Operating temperature max.Tmax | 248 °F | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.