Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Data incomplete
“32264” across 2 loaded brands
The base designation is shared, but too few brands have complete boundary dimensions. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | SKF32264320 × 580 × mm | FAG32264320 × 580 × 159 mm |
|---|---|---|
| Comparable specifications | ||
| Brand | SKF | FAG |
| Designation | 32264 | 32264 |
| Product family | Tapered roller bearings | — |
| Detailed type | Single row tapered roller bearing | Tapered roller bearings |
| Bore diameterd | 320 mm | 320 mm |
| Outside diameterD | 580 mm | 580 mm |
| WidthB | — | 159 mm |
| Basic dynamic load ratingC | 3353 kN | 3000 kN |
| Basic static load ratingC0 | 5500 kN | 5200 kN |
| Fatigue load limitPu | 415 kN | 500 kN |
| Reference speednref | 750 r/min | 530 r/min |
| Limiting speednG | 1000 r/min | 1100 r/min |
| Mass≈m | 174 kg | 170 kg |
| Precision class | — | PN — Normal (ISO 492:2023) |
| Sealing | Without | — |
| Cage | Sheet metal | Standard — Sheet steel cage, window cage, roller-guided |
| Lubricant | None | — |
| Minimum operating temperatureTmin | — | -30 °C |
| Maximum operating temperatureTmax | — | 200 °C |
| Calculation factors | ||
| Limiting value of Fa/Fr for the applicability of diff. Values of factors X and Ye | — | 0.43 |
| Dynamic axial load factorY | — | 1.38 |
| Static axial load factorY0 | — | 0.76 |
| Capabilities & suitability | ||
| Radial load capacity | — | Yes |
| Axial load capacity in one direction | — | Yes |
| Suitable for grease lubrication | — | Yes |
| Suitable for oil lubrication | — | Yes |
| Unsealed design | — | Yes |
| Largebearing | — | Yes |
| Dimensions | ||
| Width, total | 159.0 mm | — |
| Width, inner ring | 150.0 mm | — |
| Width, outer ring | 125.0 mm | — |
| Contact angle | 16.2 ° | — |
| Minimum chamfer dimension of inner ring back facer1, 2 min | — | 6 mm |
| Minimum chamfer dimension of inner ring back facer1, 2 min | — | 0.236 in |
| Minimum chamfer dimension of outer ring back facer3, 4 min | — | 5 mm |
| Minimum chamfer dimension of outer ring back facer3, 4 min | — | 0.197 in |
| Distance between the apexes of the pressure conesa | — | 136 mm |
| Distance between the apexes of the pressure conesa | — | 5.354 in |
| Guidance rib diameter of inner ringd1 | — | 439 mm |
| Guidance rib diameter of inner ringd1 | — | 17.283 in |
| Engineering — Abutment dimensions | ||
| Diameter of shaft abutmentd a | max. 369 mm | — |
| Diameter of shaft abutmentd b | min. 344.5 mm | — |
| Diameter of housing abutmentD a | max. 559 mm | — |
| Diameter of housing abutmentD b | min. 550 mm | — |
| Minimum width of space required in housing on large side faceC a | min. 12 mm | — |
| Minimum width of space required in housing on small side faceC b | min. 34 mm | — |
| Radius of shaft filletr a | max. 6 mm | — |
| Radius of housing filletr b | max. 5 mm | — |
| Engineering — Calculation data | ||
| Limiting valuee | 0.43 | — |
| Calculation factorY | 1.4 | — |
| Calculation factorY 0 | 0.8 | — |
| Engineering — Dimensions | ||
| Bearing width, totalT | 159 mm | — |
| Shoulder diameter of inner ringd 1 | ≈ 442.9 mm | — |
| Width of inner ringB | 150 mm | — |
| Width of outer ringC | 125 mm | — |
| Chamfer dimension of inner ringr 1,2 | min. 6 mm | — |
| Chamfer dimension of outer ringr 3,4 | min. 5 mm | — |
| Distance side face to pressure pointa | 133.5 mm | — |
| Engineering — Engineering specifications | ||
| Dimension series | 4GD | — |
| Logistics | ||
| Product net weight | 174.0 kg | — |
| eClass code | 23-05-09-10 | — |
| UNSPSC code | 31171516 | — |
| Main Dimensions & Performance Data | ||
| Width, inner ringB | — | 150 mm |
| Width, inner ringB | — | 5.906 in |
| Width, outer ringC | — | 125 mm |
| Width, outer ringC | — | 4.921 in |
| Width, totalT | — | 159 mm |
| Width, totalT | — | 6.26 in |
| Basic dynamic load rating, radialCr | — | 3,000,000 N |
| Basic dynamic load rating, radialCr | — | 674,460.432 lbf |
| Basic static load rating, radialC0r | — | 5,200,000 N |
| Basic static load rating, radialC0r | — | 1,169,064.748 lbf |
| Fatigue load limit, radialCur | — | 500,000 N |
| Fatigue load limit, radialCur | — | 112,410.072 lbf |
| Thermal speed ratingnϑr | — | 530 1/min |
| Manufacturer Identity | ||
| Schaeffler Product Code | — | 383594 |
| Base Type | — | 32264 |
| Gpsd Group | — | F04 |
| Product Line Id | — | 70 |
| SAP material number | — | 0190565080000 |
| Base product | — | 2305091001 |
| Bearing X designation | — | 32264 |
| Mounting Manager ID | — | 32264 |
| Grease application ID | — | 32264 |
| Mounting dimensions | ||
| Maximum diameter of shaft shoulderda max | — | 372 mm |
| Maximum diameter of shaft shoulderda max | — | 14.646 in |
| Minimum diameter of shaft shoulderdb min | — | 340 mm |
| Minimum diameter of shaft shoulderdb min | — | 13.386 in |
| Minimum diameter of housing shoulderDa min | — | 486 mm |
| Minimum diameter of housing shoulderDa min | — | 19.134 in |
| Maximum diameter of housing shoulderDa max | — | 556 mm |
| Maximum diameter of housing shoulderDa max | — | 21.89 in |
| Minimum diameter of housing shoulderDb min | — | 555 mm |
| Minimum diameter of housing shoulderDb min | — | 21.85 in |
| Minimum axial spaceCa min | — | 16 mm |
| Minimum axial spaceCa min | — | 0.63 in |
| Minimum axial spaceCb min | — | 34 mm |
| Minimum axial spaceCb min | — | 1.339 in |
| Maximum fillet radius of shaftra max | — | 6 mm |
| Maximum fillet radius of shaftra max | — | 0.236 in |
| Maximum fillet radius of housingrb max | — | 5 mm |
| Maximum fillet radius of housingrb max | — | 0.197 in |
| Product characteristics | ||
| Tolerance classPN | — | Normal (ISO 492:2023) |
| Heat treatment | — | Standard |
| Internal design | — | Standard |
| Quality level | — | Standard |
| Number of rows1 | — | Single-row design |
| Product identity | ||
| Official product category | Tapered roller bearings | — |
| Official taxonomy path | /products/rolling-bearings/roller-bearings/tapered-roller-bearings/single-row-tapered-roller-bearings | — |
| Structure group ID | BT1_001_101 | — |
| Available from SKF | Yes | — |
| Remanufacturable | Yes | — |
| Product Identity | ||
| Construction | — | Tapered roller bearings 322, main dimensions acc. to DIN 720, separable |
| Short Description | — | Tapered roller bearing |
| Properties | ||
| Bearing part | Complete bearing | — |
| Number of rows | 1 | — |
| Locating feature, bearing outer ring | Without | — |
| Bore type | Cylindrical | — |
| Arrangement of contact angle (double-row bearing) | Not applicable | — |
| Matched arrangement | No | — |
| Coating | Without | — |
| Relubrication feature | Without | — |
| Unit system | Metric | — |
| Candidate for remanufacturing | Yes | — |
| Indicative carbon footprint for new product | 643.0 kg CO 2 e | — |
| Indicative carbon footprint for remanufactured product | 214.0 kg CO 2 e | — |
| Technical Data | ||
| Bore Diameter (D) | — | 320 mm |
| Outside Diameter (D) | — | 580 mm |
| Width (B) | — | 159 mm |
| Basic Dynamic Load Rating, Radial (Cr) | — | 3,000,000 N |
| Basic Static Load Rating, Radial (C0R) | — | 5,200,000 N |
| Operating Temperature Min. (Tmin) | — | -30 °C |
| Limiting Speed (Ng) | — | 1,100 1/min |
| Operating Temperature Max. (Tmax) | — | 200 °C |
| Reference Speed (Nϑr) | — | 530 1/min |
| Maximum Fillet Radius Of Housing (Rb Max) | — | 5 mm |
| Minimum Chamfer Dimension Of Outer Ring Back Face (R3, 4 M) | — | 5 mm |
| Minimum Diameter Of Housing Shoulder (Da Min) | — | 486 mm |
| Minimum Diameter Of Housing Shoulder (Db Min) | — | 555 mm |
| Width, Outer Ring (C) | — | 125 mm |
| Fatigue Load Limit, Radial (Cur) | — | 500,000 N |
| Limiting Value Of Fa/Fr For The Applicability Of Diff. Values Of Factors X And Y (E) | — | 0.43 |
| Maximum Diameter Of Shaft Shoulder (Da Max) | — | 372 mm |
| Minimum Diameter Of Shaft Shoulder (Db Min) | — | 340 mm |
| Maximum Diameter Of Housing Shoulder (Da Max) | — | 556 mm |
| Dynamic Axial Load Factor (Y) | — | 1.38 |
| Maximum Fillet Radius (Ra Max) | — | 6 mm |
| Minimum Axial Space (Cb Min) | — | 34 mm |
| Minimum Chamfer Dimension Of Inner Ring Back Face (R1, 2 M) | — | 6 mm |
| Guidance Rib Diameter Of Inner Ring (D1) | — | 439 mm |
| Minimum Axial Space (Ca Min) | — | 16 mm |
| Width, Inner Ring (B) | — | 150 mm |
| Static Axial Load Factor (Y0) | — | 0.76 |
| Distance Between The Apexes Of The Pressure Cones (A) | — | 136 mm |
| Temperature range | ||
| Operating temperature min.Tmin | — | -30 °C |
| Operating temperature min.Tmin | — | -22 °F |
| Operating temperature max.Tmax | — | 200 °C |
| Operating temperature max.Tmax | — | 392 °F |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.