Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Cross Reference centre · Interchange verification checklist · Understand suffix differences
You entered 32260-XL. This table explores the base group 32260; it does not preserve or approve every requested suffix. Search your complete marking first →
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions verified
“32260” across 2 loaded brands
At least two brands share the same bore, outside diameter and width. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | FAG32260300 × 540 × 149 mm | TIMKEN32260300 × 540 × 149 mm |
|---|---|---|
| Comparable specifications | ||
| Brand | FAG | TIMKEN |
| Designation | 32260 | 32260 |
| Product family | — | TS - Tapered Single |
| Detailed type | Tapered roller bearings | Tapered roller bearings |
| Series | — | 32260 |
| Bore diameterd | 300 mm | 300 mm |
| Outside diameterD | 540 mm | 540 mm |
| WidthB | 149 mm | 149 mm |
| Basic dynamic load ratingC | 2650 kN | 3090 kN |
| Basic static load ratingC0 | 4550 kN | 5310 kN |
| Fatigue load limitPu | 450 kN | — |
| Reference speednref | 590 r/min | — |
| Limiting speednG | 1190 r/min | — |
| Mass≈m | 138.5 kg | 139.93 kg |
| Precision class | PN — Normal (ISO 492:2023) | ABMA Class K |
| Sealing | — | Open |
| Cage | Standard — Sheet steel cage, window cage, roller-guided | Steel cage |
| Minimum operating temperatureTmin | -30 °C | — |
| Maximum operating temperatureTmax | 200 °C | — |
| Calculation Factors | ||
| K Factor | — | 1.34 |
| Y1 Factor | — | 1.38 |
| Y2 Factor | — | 0.00 |
| Y0 Factor | — | 0.76 |
| E Factor | — | 0.43 |
| Cg Factor | — | 0.2116 |
| Calculation factors | ||
| Limiting value of Fa/Fr for the applicability of diff. Values of factors X and Ye | 0.43 | — |
| Dynamic axial load factorY | 1.38 | — |
| Static axial load factorY0 | 0.76 | — |
| Capabilities & suitability | ||
| Radial load capacity | Yes | — |
| Axial load capacity in one direction | Yes | — |
| Suitable for grease lubrication | Yes | — |
| Suitable for oil lubrication | Yes | — |
| Unsealed design | Yes | — |
| Largebearing | Yes | — |
| Dimensions | ||
| Minimum chamfer dimension of inner ring back facer1, 2 min | 6 mm | — |
| Minimum chamfer dimension of inner ring back facer1, 2 min | 0.236 in | — |
| Minimum chamfer dimension of outer ring back facer3, 4 min | 5 mm | — |
| Minimum chamfer dimension of outer ring back facer3, 4 min | 0.197 in | — |
| Distance between the apexes of the pressure conesa | 127 mm | — |
| Distance between the apexes of the pressure conesa | 5 in | — |
| Guidance rib diameter of inner ringd1 | 409.5 mm | — |
| Guidance rib diameter of inner ringd1 | 16.122 in | — |
| Main Dimensions & Performance Data | ||
| Width, inner ringB | 140 mm | — |
| Width, inner ringB | 5.512 in | — |
| Width, outer ringC | 115 mm | — |
| Width, outer ringC | 4.528 in | — |
| Width, totalT | 149 mm | — |
| Width, totalT | 5.866 in | — |
| Basic dynamic load rating, radialCr | 2,650,000 N | — |
| Basic dynamic load rating, radialCr | 595,773.381 lbf | — |
| Basic static load rating, radialC0r | 4,550,000 N | — |
| Basic static load rating, radialC0r | 1,022,931.655 lbf | — |
| Fatigue load limit, radialCur | 450,000 N | — |
| Fatigue load limit, radialCur | 101,169.065 lbf | — |
| Thermal speed ratingnϑr | 590 1/min | — |
| Manufacturer Identity | ||
| Schaeffler Product Code | 383592 | — |
| Material Number | — | 000000000190037967 |
| Base Type | 32260 | — |
| World Assembly Part Number | — | X32260M_Y32260M |
| Gpsd Group | F04 | — |
| Inner Ring Part Number | — | X32260M |
| Product Line Id | 70 | — |
| Outer Ring Part Number | — | Y32260M |
| Drawing Number | — | E-54463 |
| Upc | — | 0053893247090 |
| Official Source System | — | CORE BP - DS DF |
| Official Last Run | — | 2026-08-23T20:02:48.507 |
| SAP material number | 0392971520000 | — |
| Base product | 2305091001 | — |
| Bearing X designation | 32260 | — |
| Mounting Manager ID | 32260 | — |
| Grease application ID | 32260 | — |
| Mounting dimensions | ||
| Maximum diameter of shaft shoulderda max | 346 mm | — |
| Maximum diameter of shaft shoulderda max | 13.622 in | — |
| Minimum diameter of shaft shoulderdb min | 320 mm | — |
| Minimum diameter of shaft shoulderdb min | 12.598 in | — |
| Minimum diameter of housing shoulderDa min | 453 mm | — |
| Minimum diameter of housing shoulderDa min | 17.835 in | — |
| Maximum diameter of housing shoulderDa max | 517 mm | — |
| Maximum diameter of housing shoulderDa max | 20.354 in | — |
| Minimum diameter of housing shoulderDb min | 510 mm | — |
| Minimum diameter of housing shoulderDb min | 20.079 in | — |
| Minimum axial spaceCa min | 16 mm | — |
| Minimum axial spaceCa min | 0.63 in | — |
| Minimum axial spaceCb min | 34 mm | — |
| Minimum axial spaceCb min | 1.339 in | — |
| Maximum fillet radius of shaftra max | 6 mm | — |
| Maximum fillet radius of shaftra max | 0.236 in | — |
| Maximum fillet radius of housingrb max | 5 mm | — |
| Maximum fillet radius of housingrb max | 0.197 in | — |
| Product characteristics | ||
| Tolerance classPN | Normal (ISO 492:2023) | — |
| Heat treatment | Standard | — |
| Internal design | Standard | — |
| Quality level | Standard | — |
| Number of rows1 | Single-row design | — |
| Product Identity | ||
| Construction | Tapered roller bearings 322, main dimensions acc. to DIN 720, separable | Single Row Tapered Roller Bearing Assembly | Imperial Series | 11.8110 in Bore | 21.2598 in OD | 5.8661 in Width | Open | Cylindrical Bore | Steel Cage | Precision ABMA Class K |
| Short Description | Tapered roller bearing | — |
| Type Description | — | TS - Tapered Single |
| Number Of Rows | — | 1 |
| Tapered Bore | — | N |
| Technical Data | ||
| Bore Diameter (D) | 300 mm | — |
| Outside Diameter (D) | 540 mm | — |
| Width (B) | 149 mm | — |
| Overall Width | — | 149.000 mm |
| Basic Dynamic Load Rating, Radial (Cr) | 2,650,000 N | — |
| Radial Rating | — | 802,000 N |
| Basic Static Load Rating, Radial (C0R) | 4,550,000 N | — |
| Axial Rating | — | 597,000 N |
| Operating Temperature Min. (Tmin) | -30 °C | — |
| Dynamic Rating C1 | — | 3,090,000 N |
| Limiting Speed (Ng) | 1,190 1/min | — |
| Dynamic Rating C90 | — | 802,000 N |
| Operating Temperature Max. (Tmax) | 200 °C | — |
| Dynamic Axial Rating Ca90 | — | 597,000 N |
| Reference Speed (Nϑr) | 590 1/min | — |
| Dynamic Axial Rating Ca1 | — | 2,300,000 N |
| Maximum Fillet Radius Of Housing (Rb Max) | 5 mm | — |
| Static Radial Rating C0 | — | 5,310,000 N |
| Minimum Chamfer Dimension Of Outer Ring Back Face (R3, 4 M) | 5 mm | — |
| Extended Dynamic Rating Ce | — | 0 N |
| Minimum Diameter Of Housing Shoulder (Da Min) | 453 mm | — |
| Static Axial Rating C0A | — | 6,720,000 N |
| Minimum Diameter Of Housing Shoulder (Db Min) | 510 mm | — |
| Width, Outer Ring (C) | 115 mm | — |
| Fatigue Load Limit, Radial (Cur) | 450,000 N | — |
| Limiting Value Of Fa/Fr For The Applicability Of Diff. Values Of Factors X And Y (E) | 0.43 | — |
| Maximum Diameter Of Shaft Shoulder (Da Max) | 346 mm | — |
| Minimum Diameter Of Shaft Shoulder (Db Min) | 320 mm | — |
| Maximum Diameter Of Housing Shoulder (Da Max) | 517 mm | — |
| Dynamic Axial Load Factor (Y) | 1.38 | — |
| Maximum Fillet Radius (Ra Max) | 6 mm | — |
| Minimum Axial Space (Cb Min) | 34 mm | — |
| Minimum Chamfer Dimension Of Inner Ring Back Face (R1, 2 M) | 6 mm | — |
| Guidance Rib Diameter Of Inner Ring (D1) | 409.5 mm | — |
| Minimum Axial Space (Ca Min) | 16 mm | — |
| Width, Inner Ring (B) | 140 mm | — |
| Static Axial Load Factor (Y0) | 0.76 | — |
| Distance Between The Apexes Of The Pressure Cones (A) | 127 mm | — |
| Temperature range | ||
| Operating temperature min.Tmin | -30 °C | — |
| Operating temperature min.Tmin | -22 °F | — |
| Operating temperature max.Tmax | 200 °C | — |
| Operating temperature max.Tmax | 392 °F | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.