Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions verified
“32236” across 2 loaded brands
At least two brands share the same bore, outside diameter and width. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | SKF32236/DF180 × 320 × 182 mm | FAG32236-XL-DF-A250-300180 × 320 × 182 mm |
|---|---|---|
| Comparable specifications | ||
| Brand | SKF | FAG |
| Designation | 32236/DF | 32236-XL-DF-A250-300 |
| Product family | Tapered roller bearings | — |
| Detailed type | Matched tapered roller bearings arranged face-to-face | Tapered roller bearing set |
| Series | — | 32236 |
| Bore diameterd | 180 mm | 180 mm |
| Outside diameterD | 320 mm | 320 mm |
| WidthB | 182 mm | 182 mm |
| Basic dynamic load ratingC | 1833 kN | 2150 kN |
| Basic static load ratingC0 | 3250 kN | 3300 kN |
| Fatigue load limitPu | 300 kN | 435 kN |
| Reference speednref | 1100 r/min | 1020 r/min |
| Limiting speednG | 1900 r/min | 2490 r/min |
| Mass≈m | 61 kg | 62.3 kg |
| Precision class | — | PN — Normal (ISO 492:2023) |
| Sealing | Without | — |
| Cage | Sheet metal | Standard — Sheet steel cage, window cage, roller-guided |
| Lubricant | None | — |
| Minimum operating temperatureTmin | — | -30 °C |
| Maximum operating temperatureTmax | — | 200 °C |
| Calculation factors | ||
| Limiting value of Fa/Fr for the applicability of diff. Values of factors X and Ye | — | 0.45 |
| Dynamic axial load factorY1 | — | 1.5 |
| Dynamic axial load factorY2 | — | 2.23 |
| Static axial load factorY0 | — | 1.47 |
| Capabilities & suitability | ||
| Radial load capacity | — | Yes |
| Axial load capacity in one direction | — | Yes |
| Axial load capacity in both directions | — | Yes |
| Suitable for grease lubrication | — | Yes |
| Suitable for oil lubrication | — | Yes |
| Unsealed design | — | Yes |
| Largebearing | — | Yes |
| Dimensions | ||
| Width, total | 182.0 mm | — |
| Width, inner ring | 172.0 mm | — |
| Width, outer ring | 182.0 mm | — |
| Contact angle | 16.7 ° | — |
| Minimum chamfer dimension of outer ring back facer3, 4 min | — | 4 mm |
| Minimum chamfer dimension of outer ring back facer3, 4 min | — | 0.157 in |
| Width of spacerA | — | 40 mm |
| Width of spacerA | — | 1.575 in |
| Engineering — Abutment dimensions | ||
| Diameter of shaft abutmentd a | max. 205 mm | — |
| Diameter of housing abutmentD a | max. 303.5 mm | — |
| Minimum width of space required in housing on large side faceC a | min. 10 mm | — |
| Radius of filletr a | max. 5 mm | — |
| Radius of filletr c | max. 1.5 mm | — |
| Engineering — Calculation data | ||
| Limiting valuee | 0.46 | — |
| Calculation factorY 1 | 1.5 | — |
| Calculation factorY 2 | 2.2 | — |
| Calculation factorY 0 | 1.4 | — |
| Engineering — Dimensions | ||
| Total widthT | 182 mm | — |
| Width of inner rings2B | 172 mm | — |
| Width of lubrication grooveb | 16 mm | — |
| Diameter of lubrication holeK | 12 mm | — |
| Chamfer dimensionr 3,4 | min. 4 mm | — |
| Chamfer dimensionr 5 | min. 1.5 mm | — |
| Logistics | ||
| Product net weight | 61.0 kg | — |
| eClass code | 23-05-09-10 | — |
| Main Dimensions & Performance Data | ||
| Inner ring total width2B | — | 172 mm |
| Inner ring total width2B | — | 6.772 in |
| Outer ring total width2T | — | 182 mm |
| Outer ring total width2T | — | 7.165 in |
| Basic dynamic load rating, radialCr | — | 2,150,000 N |
| Basic dynamic load rating, radialCr | — | 483,363.309 lbf |
| Basic static load rating, radialC0r | — | 3,300,000 N |
| Basic static load rating, radialC0r | — | 741,906.475 lbf |
| Fatigue load limit, radialCur | — | 435,000 N |
| Fatigue load limit, radialCur | — | 97,796.763 lbf |
| Thermal speed ratingnϑr | — | 1,020 1/min |
| Manufacturer Identity | ||
| Schaeffler Product Code | — | 2271947 |
| Base Type | — | 32236 |
| Product Line Id | — | 64 |
| X Life Marking | — | XL |
| Base product | — | 2305091051 |
| Mounting dimensions | ||
| Maximum diameter of shaft shoulderda max | — | 204 mm |
| Maximum diameter of shaft shoulderda max | — | 8.031 in |
| Minimum diameter of housing shoulderDa min | — | 267 mm |
| Minimum diameter of housing shoulderDa min | — | 10.512 in |
| Maximum diameter of housing shoulderDa max | — | 302 mm |
| Maximum diameter of housing shoulderDa max | — | 11.89 in |
| Minimum axial spaceCa min | — | 10 mm |
| Minimum axial spaceCa min | — | 0.394 in |
| Maximum fillet radius of housingrb max | — | 4 mm |
| Maximum fillet radius of housingrb max | — | 0.157 in |
| Product characteristics | ||
| Tolerance classPN | — | Normal (ISO 492:2023) |
| Heat treatment | — | Standard |
| Axial internal clearanceA250-300 | — | Axial internal clearance between 250 and 300 µm |
| Quality levelXL | — | X-life |
| Matched arrangementF | — | X arrangement |
| Number of rows2 | — | Double-row design |
| Product identity | ||
| Official product category | Tapered roller bearings | — |
| Official taxonomy path | /products/rolling-bearings/roller-bearings/tapered-roller-bearings/matched-tapered-roller-bearings | — |
| Structure group ID | BT2_010 | — |
| Available from SKF | Yes | — |
| Remanufacturable | No | — |
| Product Identity | ||
| Construction | — | Tapered roller bearing set 322..-DF, X-arrangement |
| Short Description | — | Tapered roller bearing set |
| Properties | ||
| Bearing part | Complete bearing | — |
| Number of rows | 2 | — |
| Locating feature, bearing outer ring | Without | — |
| Bore type | Cylindrical | — |
| Matched arrangement | Face-to-face (X) | — |
| Number of bearings in matched set | 2 | — |
| Coating | Without | — |
| Relubrication feature | With | — |
| Indicative carbon footprint for new product | 226.0 kg CO 2 e | — |
| Technical Data | ||
| Bore Diameter (D) | — | 180 mm |
| Outside Diameter (D) | — | 320 mm |
| Width Of Bearing Outside (2T) | — | 182 mm |
| Basic Dynamic Load Rating, Radial (Cr) | — | 2,150,000 N |
| Basic Static Load Rating, Radial (C0R) | — | 3,300,000 N |
| Operating Temperature Min. (Tmin) | — | -30 °C |
| Limiting Speed (Ng) | — | 2,490 1/min |
| Operating Temperature Max. (Tmax) | — | 200 °C |
| Reference Speed (Nϑr) | — | 1,020 1/min |
| Maximum Fillet Radius Of Housing (Rb Max) | — | 4 mm |
| Minimum Chamfer Dimension Of Outer Ring Back Face (R3, 4 M) | — | 4 mm |
| Minimum Diameter Of Housing Shoulder (Da Min) | — | 267 mm |
| Fatigue Load Limit, Radial (Cur) | — | 435,000 N |
| Limiting Value Of Fa/Fr For The Applicability Of Diff. Values Of Factors X And Y (E) | — | 0.45 |
| Maximum Diameter Of Shaft Shoulder (Da Max) | — | 204 mm |
| Dynamic Axial Load Factor (Y1) | — | 1.5 |
| Maximum Diameter Of Housing Shoulder (Da Max) | — | 302 mm |
| Width Of Spacer (A) | — | 40 mm |
| Dynamic Axial Load Factor (Y2) | — | 2.23 |
| Width Of Bearing Inside (B4) | — | 172 mm |
| Minimum Axial Space (Ca Min) | — | 10 mm |
| Static Axial Load Factor (Y0) | — | 1.47 |
| Temperature range | ||
| Operating temperature min.Tmin | — | -30 °C |
| Operating temperature min.Tmin | — | -22 °F |
| Operating temperature max.Tmax | — | 200 °C |
| Operating temperature max.Tmax | — | 392 °F |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.