Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Cross Reference centre · Interchange verification checklist · Understand suffix differences
You entered 32222-XL. This table explores the base group 32222; it does not preserve or approve every requested suffix. Search your complete marking first →
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions verified
“32222” across 2 loaded brands
At least two brands share the same bore, outside diameter and width. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | FAG32222-A110 × 200 × 56 mm | TIMKEN32222110 × 200 × 56 mm |
|---|---|---|
| Comparable specifications | ||
| Brand | FAG | TIMKEN |
| Designation | 32222-A | 32222 |
| Product family | — | TS - Tapered Single |
| Detailed type | Tapered roller bearings | Tapered roller bearings |
| Series | 32222 | 32222 |
| Bore diameterd | 110 mm | 110 mm |
| Outside diameterD | 200 mm | 200 mm |
| WidthB | 56 mm | 56 mm |
| Basic dynamic load ratingC | 410 kN | 584 kN |
| Basic static load ratingC0 | 590 kN | 668 kN |
| Fatigue load limitPu | 67 kN | — |
| Reference speednref | 2410 r/min | — |
| Limiting speednG | 3450 r/min | — |
| Mass≈m | 7.22 kg | 7.28 kg |
| Precision class | PN — Normal (ISO 492:2023) | ABMA Class K |
| Sealing | — | Open |
| Cage | Standard — Sheet steel cage, window cage, roller-guided | Steel cage |
| Minimum operating temperatureTmin | -30 °C | — |
| Maximum operating temperatureTmax | 120 °C | — |
| Additional information | ||
| Comparative designation to ISO 10317 and ISO 355 | T3FC110 | — |
| Calculation Factors | ||
| K Factor | — | 1.39 |
| Y1 Factor | — | 1.43 |
| Y2 Factor | — | 0.00 |
| Y0 Factor | — | 0.79 |
| E Factor | — | 0.42 |
| Cg Factor | — | 0.1102 |
| Calculation factors | ||
| Limiting value of Fa/Fr for the applicability of diff. Values of factors X and Ye | 0.42 | — |
| Dynamic axial load factorY | 1.43 | — |
| Static axial load factorY0 | 0.79 | — |
| Capabilities & suitability | ||
| Radial load capacity | Yes | — |
| Axial load capacity in one direction | Yes | — |
| Suitable for grease lubrication | Yes | — |
| Suitable for oil lubrication | Yes | — |
| Unsealed design | Yes | — |
| Dimensions | ||
| Minimum chamfer dimension of inner ring back facer1, 2 min | 3 mm | — |
| Minimum chamfer dimension of inner ring back facer1, 2 min | 0.118 in | — |
| Minimum chamfer dimension of outer ring back facer3, 4 min | 2.5 mm | — |
| Minimum chamfer dimension of outer ring back facer3, 4 min | 0.098 in | — |
| Distance between the apexes of the pressure conesa | 46 mm | — |
| Distance between the apexes of the pressure conesa | 1.811 in | — |
| Guidance rib diameter of inner ringd1 | 153.5 mm | — |
| Guidance rib diameter of inner ringd1 | 6.043 in | — |
| Main Dimensions & Performance Data | ||
| Width, inner ringB | 53 mm | — |
| Width, inner ringB | 2.087 in | — |
| Width, outer ringC | 46 mm | — |
| Width, outer ringC | 1.811 in | — |
| Width, totalT | 56 mm | — |
| Width, totalT | 2.205 in | — |
| Basic dynamic load rating, radialCr | 410,000 N | — |
| Basic dynamic load rating, radialCr | 92,176.259 lbf | — |
| Basic static load rating, radialC0r | 590,000 N | — |
| Basic static load rating, radialC0r | 132,643.885 lbf | — |
| Fatigue load limit, radialCur | 67,000 N | — |
| Fatigue load limit, radialCur | 15,062.95 lbf | — |
| Thermal speed ratingnϑr | 2,410 1/min | — |
| Manufacturer Identity | ||
| Schaeffler Product Code | 384334 | — |
| Material Number | — | 000000000101752484 |
| Base Type | 32222 | — |
| World Assembly Part Number | — | X32222G_Y32222G |
| Gpsd Group | F05 | — |
| Inner Ring Part Number | — | X32222G |
| Product Line Id | 64 | — |
| Outer Ring Part Number | — | Y32222G |
| Drawing Number | — | B-198011 |
| Upc | — | 0053893449937 |
| Official Source System | — | CORE BP - DS DF |
| Official Last Run | — | 2026-08-23T20:02:46.32 |
| SAP material number | 0167127810000 | — |
| Base product | 2305091001 | — |
| Bearing X designation | 32222-A | — |
| Mounting Manager ID | 32222-A | — |
| Grease application ID | 32222-A | — |
| Mounting dimensions | ||
| Maximum diameter of shaft shoulderda max | 126 mm | — |
| Maximum diameter of shaft shoulderda max | 4.961 in | — |
| Minimum diameter of shaft shoulderdb min | 122 mm | — |
| Minimum diameter of shaft shoulderdb min | 4.803 in | — |
| Minimum diameter of housing shoulderDa min | 170 mm | — |
| Minimum diameter of housing shoulderDa min | 6.693 in | — |
| Maximum diameter of housing shoulderDa max | 188 mm | — |
| Maximum diameter of housing shoulderDa max | 7.402 in | — |
| Minimum diameter of housing shoulderDb min | 190 mm | — |
| Minimum diameter of housing shoulderDb min | 7.48 in | — |
| Minimum axial spaceCa min | 6 mm | — |
| Minimum axial spaceCa min | 0.236 in | — |
| Minimum axial spaceCb min | 10 mm | — |
| Minimum axial spaceCb min | 0.394 in | — |
| Maximum fillet radius of shaftra max | 3 mm | — |
| Maximum fillet radius of shaftra max | 0.118 in | — |
| Maximum fillet radius of housingrb max | 2.5 mm | — |
| Maximum fillet radius of housingrb max | 0.098 in | — |
| Product characteristics | ||
| Tolerance classPN | Normal (ISO 492:2023) | — |
| Heat treatment | Standard | — |
| Internal design | Standard | — |
| Quality level | Standard | — |
| Number of rows1 | Single-row design | — |
| Product Identity | ||
| Construction | Tapered roller bearings 322, main dimensions acc. to DIN 720, separable | Single Row Tapered Roller Bearing Assembly | Imperial Series | 4.3307 in Bore | 7.8740 in OD | 2.2047 in Width | Open | Cylindrical Bore | Steel Cage | Precision ABMA Class K |
| Short Description | Tapered roller bearing | — |
| Type Description | — | TS - Tapered Single |
| Number Of Rows | — | 1 |
| Tapered Bore | — | N |
| Technical Data | ||
| Bore Diameter (D) | 110 mm | — |
| Outside Diameter (D) | 200 mm | — |
| Width (B) | 56 mm | — |
| Overall Width | — | 65.200 mm |
| Basic Dynamic Load Rating, Radial (Cr) | 410,000 N | — |
| Radial Rating | — | 151,000 N |
| Basic Static Load Rating, Radial (C0R) | 590,000 N | — |
| Axial Rating | — | 109,000 N |
| Operating Temperature Min. (Tmin) | -30 °C | — |
| Dynamic Rating C1 | — | 584,000 N |
| Limiting Speed (Ng) | 3,450 1/min | — |
| Dynamic Rating C90 | — | 151,000 N |
| Operating Temperature Max. (Tmax) | 120 °C | — |
| Dynamic Axial Rating Ca90 | — | 109,000 N |
| Reference Speed (Nϑr) | 2,410 1/min | — |
| Dynamic Axial Rating Ca1 | — | 420,000 N |
| Maximum Fillet Radius Of Housing (Rb Max) | 2.5 mm | — |
| Static Radial Rating C0 | — | 668,000 N |
| Minimum Chamfer Dimension Of Outer Ring Back Face (R3, 4 M) | 2.5 mm | — |
| Extended Dynamic Rating Ce | — | 0 N |
| Minimum Diameter Of Housing Shoulder (Da Min) | 170 mm | — |
| Static Axial Rating C0A | — | 817,000 N |
| Minimum Diameter Of Housing Shoulder (Db Min) | 190 mm | — |
| Width, Outer Ring (C) | 46 mm | — |
| Fatigue Load Limit, Radial (Cur) | 67,000 N | — |
| Limiting Value Of Fa/Fr For The Applicability Of Diff. Values Of Factors X And Y (E) | 0.42 | — |
| Maximum Diameter Of Shaft Shoulder (Da Max) | 126 mm | — |
| Minimum Diameter Of Shaft Shoulder (Db Min) | 122 mm | — |
| Maximum Diameter Of Housing Shoulder (Da Max) | 188 mm | — |
| Dynamic Axial Load Factor (Y) | 1.43 | — |
| Maximum Fillet Radius (Ra Max) | 3 mm | — |
| Minimum Axial Space (Cb Min) | 10 mm | — |
| Minimum Chamfer Dimension Of Inner Ring Back Face (R1, 2 M) | 3 mm | — |
| Guidance Rib Diameter Of Inner Ring (D1) | 153.5 mm | — |
| Minimum Axial Space (Ca Min) | 6 mm | — |
| Width, Inner Ring (B) | 53 mm | — |
| Static Axial Load Factor (Y0) | 0.79 | — |
| Distance Between The Apexes Of The Pressure Cones (A) | 46 mm | — |
| Temperature range | ||
| Operating temperature min.Tmin | -30 °C | — |
| Operating temperature min.Tmin | -22 °F | — |
| Operating temperature max.Tmax | 120 °C | — |
| Operating temperature max.Tmax | 248 °F | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.