Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions verified
“3222” across 2 loaded brands
At least two brands share the same bore, outside diameter and width. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | SKF3222 A110 × 200 × 69.8 mm | KOYO3222110 × 200 × 69.8 mm |
|---|---|---|
| Comparable specifications | ||
| Brand | SKF | KOYO |
| Designation | 3222 A | 3222 |
| Product family | Angular contact ball bearings | Double-row / Open |
| Detailed type | Double row angular contact ball bearing | Angular contact ball bearings |
| Bore diameterd | 110 mm | 110 mm |
| Outside diameterD | 200 mm | 200 mm |
| WidthB | 69.8 mm | 69.8 mm |
| Basic dynamic load ratingC | 212 kN | 251 kN |
| Basic static load ratingC0 | 212 kN | 263 kN |
| Fatigue load limitPu | 7.2 kN | 10.9 kN |
| Reference speednref | 3400 r/min | — |
| Limiting speednG | 2800 r/min | 1900 r/min |
| Mass≈m | 7.99 kg | 8.8 kg |
| Sealing | Without | Open |
| Cage | Sheet metal | — |
| Bearing material | Bearing steel | — |
| Lubricant | None | — |
| Classification | ||
| Official Category Path | — | Angular contact ball bearings - Double-row - Open |
| Official Classification 1 | — | Angular contact ball bearings / Double-row / Open |
| Dimensions | ||
| Contact angle | 30.0 ° | — |
| Engineering — Abutment dimensions | ||
| Abutment diameter shaftd a | min. 122 mm | — |
| Abutment diameter housingD a | max. 188 mm | — |
| Fillet radiusr a | max. 2 mm | — |
| Engineering — Calculation data | ||
| Calculation factork r | 0.06 | — |
| Limiting valuee | 0.8 | — |
| Calculation factorX | 0.63 | — |
| Calculation factorY 0 | 0.66 | — |
| Calculation factorY 1 | 0.78 | — |
| Calculation factorY 2 | 1.2 | — |
| Engineering — Dimensions | ||
| Shoulder diameter inner ringd 1 | ≈ 139.25 mm | — |
| Shoulder diameter outer ringD 1 | ≈ 173.7 mm | — |
| Chamfer dimension inner ringr 1,2 | min. 2.1 mm | — |
| Distance pressure point(s)a | 119 mm | — |
| Logistics | ||
| Product net weight | 7.99 kg | — |
| eClass code | 23-05-08-03 | — |
| UNSPSC code | 31171531 | — |
| Manufacturer Identity | ||
| Official Class Key | — | 020-030-000 |
| Product identity | ||
| Official product category | Angular contact ball bearings | — |
| Official taxonomy path | /products/rolling-bearings/ball-bearings/angular-contact-ball-bearings/double-row-angular-contact-ball-bearings | — |
| Structure group ID | BA2_001 | — |
| Available from SKF | Yes | — |
| Remanufacturable | No | — |
| Properties | ||
| Contact type | Normal contact (two-point contact) | — |
| Number of rows | 2 | — |
| Locating feature, bearing outer ring | Without | — |
| Ring type | One-piece inner and outer rings | — |
| Arrangement of contact angle (double-row bearing) | Back-to-back (O) | — |
| Matched arrangement | No | — |
| Universal matching bearing | No | — |
| Axial internal clearance | CN | — |
| Material, bearing | Bearing steel | — |
| Coating | Without | — |
| Relubrication feature | Without | — |
| Indicative carbon footprint for new product | 29.6 kg CO 2 e | — |
| Technical Data | ||
| d | — | 200 mm |
| B | — | 69.8 mm |
| R(Min.) | — | 2.1 mm |
| Basic Load Ratings : Cr | — | 251 kN |
| Basic Load Ratings : C0R | — | 263 kN |
| Fatigue Load Limit : Cu | — | 10.9 kN |
| Limiting Speeds(Grease Lub.) | — | 1900 min-1 |
| Limiting Speeds(Oil Lub.) | — | 2500 min-1 |
| Load Center Spread : A | — | 131.4 mm |
| Da(Min.) | — | 122 mm |
| Da(Max.) | — | 188 mm |
| Ra(Max.) | — | 2 mm |
| Mass(Refer.) | — | 8.80 kg |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.