Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions differ
“322” across 4 loaded brands
The base designation is shared, but the loaded boundary dimensions do not agree. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | SKF322/28 B28 × 58 × mm | FAG322/28-B28 × 58 × 20.25 mm | TIMKEN322W110 × 240 × 50 mm | KOYO322/3232 × 65 × 21 mm |
|---|---|---|---|---|
| Comparable specifications | ||||
| Brand | SKF | FAG | TIMKEN | KOYO |
| Designation | 322/28 B | 322/28-B | 322W | 322/32 |
| Product family | Tapered roller bearings | — | Radial Deep-Groove Ball | Single-row / Metric series |
| Detailed type | Single row tapered roller bearing | Tapered roller bearings | Deep groove ball bearings | Tapered roller bearings |
| Series | — | 322/28 | 300 | — |
| Bore diameterd | 28 mm | 28 mm | 110 mm | 32 mm |
| Outside diameterD | 58 mm | 58 mm | 240 mm | 65 mm |
| WidthB | — | 20.25 mm | 50 mm | 21 mm |
| Basic dynamic load ratingC | 51.9 kN | 42 kN | 269 kN | 64.5 kN |
| Basic static load ratingC0 | 50 kN | 49.5 kN | 268 kN | 57.7 kN |
| Fatigue load limitPu | 5.5 kN | 5.7 kN | — | 8.45 kN |
| Reference speednref | 9500 r/min | 7600 r/min | — | — |
| Limiting speednG | 12000 r/min | 12800 r/min | — | 6200 r/min |
| Mass≈m | 0.25 kg | 0.249 kg | 10.81 kg | 0.33 kg |
| Precision class | — | PN — Normal (ISO 492:2023) | — | — |
| Sealing | Without | — | Open | — |
| Cage | Sheet metal | Standard — Sheet steel cage, window cage, roller-guided | Steel cage | — |
| Lubricant | None | — | — | — |
| Minimum operating temperatureTmin | — | -30 °C | — | — |
| Maximum operating temperatureTmax | — | 120 °C | — | — |
| Additional information | ||||
| Comparative designation to ISO 10317 and ISO 355 | — | T5DD028 | — | — |
| Calculation Factors | ||||
| K Factor | — | — | 0.00 | — |
| Y1 Factor | — | — | 0.00 | — |
| Y2 Factor | — | — | 0.00 | — |
| Y0 Factor | — | — | 0.50 | — |
| E Factor | — | — | 0.00 | — |
| Cg Factor | — | — | 0.0794 | — |
| Calculation factors | ||||
| Limiting value of Fa/Fr for the applicability of diff. Values of factors X and Ye | — | 0.56 | — | — |
| Dynamic axial load factorY | — | 1.07 | — | — |
| Static axial load factorY0 | — | 0.59 | — | — |
| Capabilities & suitability | ||||
| Radial load capacity | — | Yes | — | — |
| Axial load capacity in one direction | — | Yes | — | — |
| Suitable for grease lubrication | — | Yes | — | — |
| Suitable for oil lubrication | — | Yes | — | — |
| Unsealed design | — | Yes | — | — |
| Classification | ||||
| Official Category Path | — | — | — | Tapered roller bearings - Single-row - Metric series |
| Official Classification 1 | — | — | — | Tapered roller bearings / Single-row / Metric series |
| Dimensions | ||||
| Width, total | 20.25 mm | — | — | — |
| Width, inner ring | 19.0 mm | — | — | — |
| Width, outer ring | 16.0 mm | — | — | — |
| Contact angle | 20.6 ° | — | — | — |
| Minimum chamfer dimension of inner ring back facer1, 2 min | — | 1 mm | — | — |
| Minimum chamfer dimension of inner ring back facer1, 2 min | — | 0.039 in | — | — |
| Minimum chamfer dimension of outer ring back facer3, 4 min | — | 1 mm | — | — |
| Minimum chamfer dimension of outer ring back facer3, 4 min | — | 0.039 in | — | — |
| Distance between the apexes of the pressure conesa | — | 17 mm | — | — |
| Distance between the apexes of the pressure conesa | — | 0.669 in | — | — |
| Guidance rib diameter of inner ringd1 | — | 44.9 mm | — | — |
| Guidance rib diameter of inner ringd1 | — | 1.768 in | — | — |
| Engineering — Abutment dimensions | ||||
| Diameter of shaft abutmentd a | max. 33 mm | — | — | — |
| Diameter of shaft abutmentd b | min. 35 mm | — | — | — |
| Diameter of housing abutmentD a | max. 52 mm | — | — | — |
| Diameter of housing abutmentD b | min. 55 mm | — | — | — |
| Minimum width of space required in housing on large side faceC a | min. 3 mm | — | — | — |
| Minimum width of space required in housing on small side faceC b | min. 4 mm | — | — | — |
| Radius of shaft filletr a | max. 1 mm | — | — | — |
| Radius of housing filletr b | max. 1 mm | — | — | — |
| Engineering — Calculation data | ||||
| SKF performance class | SKF Explorer | — | — | — |
| Limiting valuee | 0.57 | — | — | — |
| Calculation factorY | 1.1 | — | — | — |
| Calculation factorY 0 | 0.6 | — | — | — |
| Engineering — Dimensions | ||||
| Bearing width, totalT | 20.25 mm | — | — | — |
| Shoulder diameter of inner ringd 1 | ≈ 43.9 mm | — | — | — |
| Width of inner ringB | 19 mm | — | — | — |
| Width of outer ringC | 16 mm | — | — | — |
| Chamfer dimension of inner ringr 1,2 | min. 1 mm | — | — | — |
| Chamfer dimension of outer ringr 3,4 | min. 1 mm | — | — | — |
| Distance side face to pressure pointa | 16.8 mm | — | — | — |
| Engineering — Engineering specifications | ||||
| Dimension series | 5DD | — | — | — |
| Logistics | ||||
| Product net weight | 0.25 kg | — | — | — |
| eClass code | 23-05-09-10 | — | — | — |
| UNSPSC code | 31171516 | — | — | — |
| Main Dimensions & Performance Data | ||||
| Width, inner ringB | — | 19 mm | — | — |
| Width, inner ringB | — | 0.748 in | — | — |
| Width, outer ringC | — | 16 mm | — | — |
| Width, outer ringC | — | 0.63 in | — | — |
| Width, totalT | — | 20.25 mm | — | — |
| Width, totalT | — | 0.797 in | — | — |
| Basic dynamic load rating, radialCr | — | 42,000 N | — | — |
| Basic dynamic load rating, radialCr | — | 9,442.446 lbf | — | — |
| Basic static load rating, radialC0r | — | 49,500 N | — | — |
| Basic static load rating, radialC0r | — | 11,128.597 lbf | — | — |
| Fatigue load limit, radialCur | — | 5,700 N | — | — |
| Fatigue load limit, radialCur | — | 1,281.475 lbf | — | — |
| Thermal speed ratingnϑr | — | 7,600 1/min | — | — |
| Manufacturer Identity | ||||
| Schaeffler Product Code | — | 2268443 | — | — |
| Material Number | — | — | 000000000100024277 | — |
| Official Class Key | — | — | — | 050-010-010 |
| Base Type | — | 322/28 | — | — |
| World Assembly Part Number | — | — | 322W | — |
| Product Line Id | — | 36 | — | — |
| Upc | — | — | 0087796067806 | — |
| Official Source System | — | — | CORE BP - DS DF | — |
| Official Last Run | — | — | 2026-08-23T20:02:47.93 | — |
| Base product | — | 2305091001 | — | — |
| Bearing X designation | — | 322/28-B | — | — |
| Mounting Manager ID | — | 322/28-B | — | — |
| Grease application ID | — | 322/28-B | — | — |
| Mounting dimensions | ||||
| Maximum diameter of shaft shoulderda max | — | 33 mm | — | — |
| Maximum diameter of shaft shoulderda max | — | 1.299 in | — | — |
| Minimum diameter of shaft shoulderdb min | — | 34 mm | — | — |
| Minimum diameter of shaft shoulderdb min | — | 1.339 in | — | — |
| Minimum diameter of housing shoulderDa min | — | 46 mm | — | — |
| Minimum diameter of housing shoulderDa min | — | 1.811 in | — | — |
| Maximum diameter of housing shoulderDa max | — | 55 mm | — | — |
| Maximum diameter of housing shoulderDa max | — | 2.165 in | — | — |
| Minimum diameter of housing shoulderDb min | — | 52 mm | — | — |
| Minimum diameter of housing shoulderDb min | — | 2.047 in | — | — |
| Minimum axial spaceCa min | — | 3 mm | — | — |
| Minimum axial spaceCa min | — | 0.118 in | — | — |
| Minimum axial spaceCb min | — | 4 mm | — | — |
| Minimum axial spaceCb min | — | 0.157 in | — | — |
| Maximum fillet radius of shaftra max | — | 1 mm | — | — |
| Maximum fillet radius of shaftra max | — | 0.039 in | — | — |
| Maximum fillet radius of housingrb max | — | 1 mm | — | — |
| Maximum fillet radius of housingrb max | — | 0.039 in | — | — |
| Product characteristics | ||||
| Tolerance classPN | — | Normal (ISO 492:2023) | — | — |
| Heat treatment | — | Standard | — | — |
| Internal designB | — | Increased contact angle | — | — |
| Quality level | — | Standard | — | — |
| Number of rows1 | — | Single-row design | — | — |
| Product identity | ||||
| Official product category | Tapered roller bearings | — | — | — |
| Official taxonomy path | /products/rolling-bearings/roller-bearings/tapered-roller-bearings/single-row-tapered-roller-bearings | — | — | — |
| Structure group ID | BT1_001_101 | — | — | — |
| Available from SKF | Yes | — | — | — |
| Remanufacturable | No | — | — | — |
| Product Identity | ||||
| Construction | — | Tapered roller bearings 322, main dimensions acc. to DIN 720, separable | Single Row Deep Groove Ball Bearing | Imperial Series | 4.3307 in Bore | 9.4488 in OD | 1.9685 in Width | Open | Cylindrical Bore | Steel Cage | C0 Clearance | ISO P0 Tolerance | — |
| Type Description | — | — | Radial Deep-Groove Ball | — |
| Short Description | — | Tapered roller bearing | — | — |
| Number Of Rows | 1 | — | 1 | — |
| Tapered Bore | — | — | N | — |
| Properties | ||||
| Bearing part | Complete bearing | — | — | — |
| Locating feature, bearing outer ring | Without | — | — | — |
| Bore type | Cylindrical | — | — | — |
| Arrangement of contact angle (double-row bearing) | Not applicable | — | — | — |
| Matched arrangement | No | — | — | — |
| Coating | Without | — | — | — |
| Relubrication feature | Without | — | — | — |
| Unit system | Metric | — | — | — |
| Indicative carbon footprint for new product | 0.93 kg CO 2 e | — | — | — |
| Technical Data | ||||
| d | — | — | — | 65 mm |
| Bore Diameter (D) | — | 28 mm | — | — |
| Overall Width | — | — | 0.000 mm | — |
| T | — | — | — | 22.25 mm |
| Outside Diameter (D) | — | 58 mm | — | — |
| Radial Rating | — | — | 298,000 N | — |
| B | — | — | — | 21 mm |
| Width (B) | — | 20.25 mm | — | — |
| Axial Rating | — | — | 0 N | — |
| C | — | — | — | 18 mm |
| Basic Dynamic Load Rating, Radial (Cr) | — | 42,000 N | — | — |
| Dynamic Rating C1 | — | — | 269,000 N | — |
| R(Min.) | — | — | — | 1 mm |
| Basic Static Load Rating, Radial (C0R) | — | 49,500 N | — | — |
| Dynamic Rating C90 | — | — | 0 N | — |
| R1(Min.) | — | — | — | 1 mm |
| Operating Temperature Min. (Tmin) | — | -30 °C | — | — |
| Dynamic Axial Rating Ca90 | — | — | 0 N | — |
| Basic Load Ratings : Cr | — | — | — | 64.5 kN |
| Limiting Speed (Ng) | — | 12,800 1/min | — | — |
| Dynamic Axial Rating Ca1 | — | — | 0 N | — |
| Basic Load Ratings : C0R | — | — | — | 57.7 kN |
| Operating Temperature Max. (Tmax) | — | 120 °C | — | — |
| Static Radial Rating C0 | — | — | 268,000 N | — |
| Fatigue Load Limit : Cu | — | — | — | 8.45 kN |
| Reference Speed (Nϑr) | — | 7,600 1/min | — | — |
| Extended Dynamic Rating Ce | — | — | 298,000 N | — |
| Limiting Speeds(Grease Lub.) | — | — | — | 6200 min-1 |
| Maximum Fillet Radius Of Housing (Rb Max) | — | 1 mm | — | — |
| Static Axial Rating C0A | — | — | 0 N | — |
| Limiting Speeds(Oil Lub.) | — | — | — | 8200 min-1 |
| Minimum Chamfer Dimension Of Outer Ring Back Face (R3, 4 M) | — | 1 mm | — | — |
| Load Center Spread : A | — | — | — | 16.3 mm |
| Minimum Diameter Of Housing Shoulder (Da Min) | — | 46 mm | — | — |
| Constant E | — | — | — | 0.37 |
| Minimum Diameter Of Housing Shoulder (Db Min) | — | 52 mm | — | — |
| Axial Load Factors : Y1 | — | — | — | 1.60 |
| Width, Outer Ring (C) | — | 16 mm | — | — |
| Axial Load Factors : Y0 | — | — | — | 0.88 |
| Fatigue Load Limit, Radial (Cur) | — | 5,700 N | — | — |
| Da(Min.) | — | — | — | 55 mm |
| Limiting Value Of Fa/Fr For The Applicability Of Diff. Values Of Factors X And Y (E) | — | 0.56 | — | — |
| Db(Max.) | — | — | — | 40 mm |
| Maximum Diameter Of Shaft Shoulder (Da Max) | — | 33 mm | — | — |
| Da(Max.) | — | — | — | 59.5 mm |
| Minimum Diameter Of Shaft Shoulder (Db Min) | — | 34 mm | — | — |
| Db(Min.) | — | — | — | 61 mm |
| Maximum Diameter Of Housing Shoulder (Da Max) | — | 55 mm | — | — |
| Sa(Min.) | — | — | — | 2 mm |
| Dynamic Axial Load Factor (Y) | — | 1.07 | — | — |
| Sb(Min.) | — | — | — | 4 mm |
| Maximum Fillet Radius (Ra Max) | — | 1 mm | — | — |
| Ra(Max.) | — | — | — | 1 mm |
| Minimum Axial Space (Cb Min) | — | 4 mm | — | — |
| Rb(Max.) | — | — | — | 1 mm |
| Minimum Chamfer Dimension Of Inner Ring Back Face (R1, 2 M) | — | 1 mm | — | — |
| Mass(Refer.) | — | — | — | 0.330 kg |
| Guidance Rib Diameter Of Inner Ring (D1) | — | 44.9 mm | — | — |
| Minimum Axial Space (Ca Min) | — | 3 mm | — | — |
| Width, Inner Ring (B) | — | 19 mm | — | — |
| Static Axial Load Factor (Y0) | — | 0.59 | — | — |
| Distance Between The Apexes Of The Pressure Cones (A) | — | 17 mm | — | — |
| Temperature range | ||||
| Operating temperature min.Tmin | — | -30 °C | — | — |
| Operating temperature min.Tmin | — | -22 °F | — | — |
| Operating temperature max.Tmax | — | 120 °C | — | — |
| Operating temperature max.Tmax | — | 248 °F | — | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.