Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions verified
“32064” across 3 loaded brands
At least two brands share the same bore, outside diameter and width. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | FAG32064-X-XL320 × 480 × 100 mm | TIMKEN32064X320 × 480 × 100 mm | KOYO32064JR320 × 480 × 100 mm |
|---|---|---|---|
| Comparable specifications | |||
| Brand | FAG | TIMKEN | KOYO |
| Designation | 32064-X-XL | 32064X | 32064JR |
| Product family | — | TS - Tapered Single | Single-row / Metric series |
| Detailed type | Tapered roller bearings | Tapered roller bearings | Tapered roller bearings |
| Series | 32064 | 32064X | — |
| Bore diameterd | 320 mm | 320 mm | 320 mm |
| Outside diameterD | 480 mm | 480 mm | 480 mm |
| WidthB | 100 mm | 100 mm | 100 mm |
| Basic dynamic load ratingC | 1850 kN | 1800 kN | 1900 kN |
| Basic static load ratingC0 | 3050 kN | 3420 kN | 2810 kN |
| Fatigue load limitPu | 355 kN | — | 273 kN |
| Reference speednref | 690 r/min | — | — |
| Limiting speednG | 1580 r/min | — | 600 r/min |
| Mass≈m | 60.7 kg | 59.4 kg | 58.7 kg |
| Precision class | PN — Normal (ISO 492:2023) | ABMA Class K | — |
| Sealing | — | Open | — |
| Cage | Standard — Sheet steel cage, window cage, roller-guided | Steel cage | — |
| Minimum operating temperatureTmin | -30 °C | — | — |
| Maximum operating temperatureTmax | 200 °C | — | — |
| Additional information | |||
| Comparative designation to ISO 10317 and ISO 355 | T4GD320 | — | — |
| Calculation Factors | |||
| K Factor | — | 1.27 | — |
| Y1 Factor | — | 1.31 | — |
| Y2 Factor | — | 0.00 | — |
| Y0 Factor | — | 0.72 | — |
| E Factor | — | 0.46 | — |
| Cg Factor | — | 0.1998 | — |
| Calculation factors | |||
| Limiting value of Fa/Fr for the applicability of diff. Values of factors X and Ye | 0.46 | — | — |
| Dynamic axial load factorY | 1.31 | — | — |
| Static axial load factorY0 | 0.72 | — | — |
| Capabilities & suitability | |||
| Radial load capacity | Yes | — | — |
| Axial load capacity in one direction | Yes | — | — |
| Suitable for grease lubrication | Yes | — | — |
| Suitable for oil lubrication | Yes | — | — |
| Unsealed design | Yes | — | — |
| Largebearing | Yes | — | — |
| Classification | |||
| Official Category Path | — | — | Tapered roller bearings - Single-row - Metric series |
| Official Classification 1 | — | — | Tapered roller bearings / Single-row / Metric series |
| Dimensions | |||
| Minimum chamfer dimension of inner ring back facer1, 2 min | 5 mm | — | — |
| Minimum chamfer dimension of inner ring back facer1, 2 min | 0.197 in | — | — |
| Minimum chamfer dimension of outer ring back facer3, 4 min | 4 mm | — | — |
| Minimum chamfer dimension of outer ring back facer3, 4 min | 0.157 in | — | — |
| Distance between the apexes of the pressure conesa | 104 mm | — | — |
| Distance between the apexes of the pressure conesa | 4.094 in | — | — |
| Guidance rib diameter of inner ringd1 | 398.5 mm | — | — |
| Guidance rib diameter of inner ringd1 | 15.689 in | — | — |
| Main Dimensions & Performance Data | |||
| Width, inner ringB | 100 mm | — | — |
| Width, inner ringB | 3.937 in | — | — |
| Width, outer ringC | 74 mm | — | — |
| Width, outer ringC | 2.913 in | — | — |
| Width, totalT | 100 mm | — | — |
| Width, totalT | 3.937 in | — | — |
| Basic dynamic load rating, radialCr | 1,850,000 N | — | — |
| Basic dynamic load rating, radialCr | 415,917.266 lbf | — | — |
| Basic static load rating, radialC0r | 3,050,000 N | — | — |
| Basic static load rating, radialC0r | 685,701.439 lbf | — | — |
| Fatigue load limit, radialCur | 355,000 N | — | — |
| Fatigue load limit, radialCur | 79,811.151 lbf | — | — |
| Thermal speed ratingnϑr | 690 1/min | — | — |
| Manufacturer Identity | |||
| Schaeffler Product Code | 383590 | — | — |
| Material Number | — | 000000000100211061 | — |
| Official Class Key | — | — | 050-010-010 |
| Base Type | 32064 | — | — |
| World Assembly Part Number | — | X32064XM_Y32064XM | — |
| Old Designation | ["32064-X"] | — | — |
| Inner Ring Part Number | — | X32064XM | — |
| Gpsd Group | F04 | — | — |
| Outer Ring Part Number | — | Y32064XM | — |
| Product Line Id | 70 | — | — |
| Drawing Number | — | C-53023 | — |
| X Life Marking | XL | — | — |
| Upc | — | 0053893107554 | — |
| Official Source System | — | CORE BP - DS DF | — |
| Official Last Run | — | 2026-08-23T20:02:46.327 | — |
| SAP material number | 0884264320000 | — | — |
| Base product | 2305091001 | — | — |
| Bearing X designation | 32064-X-XL | — | — |
| Mounting Manager ID | 32064-X-XL | — | — |
| Grease application ID | 32064-X-XL | — | — |
| Mounting dimensions | |||
| Maximum diameter of shaft shoulderda max | 350 mm | — | — |
| Maximum diameter of shaft shoulderda max | 13.78 in | — | — |
| Minimum diameter of shaft shoulderdb min | 338 mm | — | — |
| Minimum diameter of shaft shoulderdb min | 13.307 in | — | — |
| Minimum diameter of housing shoulderDa min | 424 mm | — | — |
| Minimum diameter of housing shoulderDa min | 16.693 in | — | — |
| Maximum diameter of housing shoulderDa max | 462 mm | — | — |
| Maximum diameter of housing shoulderDa max | 18.189 in | — | — |
| Minimum diameter of housing shoulderDb min | 461 mm | — | — |
| Minimum diameter of housing shoulderDb min | 18.15 in | — | — |
| Minimum axial spaceCa min | 15 mm | — | — |
| Minimum axial spaceCa min | 0.591 in | — | — |
| Minimum axial spaceCb min | 26 mm | — | — |
| Minimum axial spaceCb min | 1.024 in | — | — |
| Maximum fillet radius of shaftra max | 5 mm | — | — |
| Maximum fillet radius of shaftra max | 0.197 in | — | — |
| Maximum fillet radius of housingrb max | 4 mm | — | — |
| Maximum fillet radius of housingrb max | 0.157 in | — | — |
| Product characteristics | |||
| Tolerance classPN | Normal (ISO 492:2023) | — | — |
| Heat treatment | Standard | — | — |
| Internal design | Standard | — | — |
| Quality levelXL | X-life | — | — |
| Number of rows1 | Single-row design | — | — |
| Product Identity | |||
| Construction | Tapered roller bearings 320, main dimensions acc. to DIN 720, separable | Single Row Tapered Roller Bearing Assembly | Imperial Series | 12.5984 in Bore | 18.8976 in OD | 3.9370 in Width | Open | Cylindrical Bore | Steel Cage | Precision ABMA Class K | — |
| Type Description | — | TS - Tapered Single | — |
| Short Description | Tapered roller bearing | — | — |
| Number Of Rows | — | 1 | — |
| Tapered Bore | — | N | — |
| Technical Data | |||
| d | — | — | 480 mm |
| T | — | — | 100 mm |
| B | — | — | 100 mm |
| C | — | — | 74 mm |
| Bore Diameter (D) | 320 mm | — | — |
| Overall Width | — | 118.800 mm | — |
| R(Min.) | — | — | 5 mm |
| Outside Diameter (D) | 480 mm | — | — |
| Radial Rating | — | 468,000 N | — |
| R1(Min.) | — | — | 4 mm |
| Width (B) | 100 mm | — | — |
| Axial Rating | — | 367,000 N | — |
| Basic Load Ratings : Cr | — | — | 1900 kN |
| Basic Dynamic Load Rating, Radial (Cr) | 1,850,000 N | — | — |
| Dynamic Rating C1 | — | 1,800,000 N | — |
| Basic Load Ratings : C0R | — | — | 2810 kN |
| Basic Static Load Rating, Radial (C0R) | 3,050,000 N | — | — |
| Dynamic Rating C90 | — | 468,000 N | — |
| Fatigue Load Limit : Cu | — | — | 273 kN |
| Operating Temperature Min. (Tmin) | -30 °C | — | — |
| Dynamic Axial Rating Ca90 | — | 367,000 N | — |
| Limiting Speeds(Grease Lub.) | — | — | 600 min-1 |
| Limiting Speed (Ng) | 1,580 1/min | — | — |
| Dynamic Axial Rating Ca1 | — | 1,420,000 N | — |
| Limiting Speeds(Oil Lub.) | — | — | 800 min-1 |
| Operating Temperature Max. (Tmax) | 200 °C | — | — |
| Static Radial Rating C0 | — | 3,420,000 N | — |
| Load Center Spread : A | — | — | 103.0 mm |
| Reference Speed (Nϑr) | 690 1/min | — | — |
| Extended Dynamic Rating Ce | — | 0 N | — |
| Constant E | — | — | 0.46 |
| Maximum Fillet Radius Of Housing (Rb Max) | 4 mm | — | — |
| Static Axial Rating C0A | — | 4,570,000 N | — |
| Axial Load Factors : Y1 | — | — | 1.31 |
| Minimum Chamfer Dimension Of Outer Ring Back Face (R3, 4 M) | 4 mm | — | — |
| Axial Load Factors : Y0 | — | — | 0.72 |
| Minimum Diameter Of Housing Shoulder (Da Min) | 424 mm | — | — |
| Da(Min.) | — | — | 418 mm |
| Minimum Diameter Of Housing Shoulder (Db Min) | 461 mm | — | — |
| Db(Max.) | — | — | 344 mm |
| Width, Outer Ring (C) | 74 mm | — | — |
| Da(Max.) | — | — | 462 mm |
| Fatigue Load Limit, Radial (Cur) | 355,000 N | — | — |
| Db(Min.) | — | — | 461 mm |
| Limiting Value Of Fa/Fr For The Applicability Of Diff. Values Of Factors X And Y (E) | 0.46 | — | — |
| Sa(Min.) | — | — | 16 mm |
| Maximum Diameter Of Shaft Shoulder (Da Max) | 350 mm | — | — |
| Sb(Min.) | — | — | 26 mm |
| Minimum Diameter Of Shaft Shoulder (Db Min) | 338 mm | — | — |
| Ra(Max.) | — | — | 4 mm |
| Maximum Diameter Of Housing Shoulder (Da Max) | 462 mm | — | — |
| Rb(Max.) | — | — | 3 mm |
| Dynamic Axial Load Factor (Y) | 1.31 | — | — |
| Mass(Refer.) | — | — | 58.7 kg |
| Maximum Fillet Radius (Ra Max) | 5 mm | — | — |
| Minimum Axial Space (Cb Min) | 26 mm | — | — |
| Minimum Chamfer Dimension Of Inner Ring Back Face (R1, 2 M) | 5 mm | — | — |
| Guidance Rib Diameter Of Inner Ring (D1) | 398.5 mm | — | — |
| Minimum Axial Space (Ca Min) | 15 mm | — | — |
| Width, Inner Ring (B) | 100 mm | — | — |
| Static Axial Load Factor (Y0) | 0.72 | — | — |
| Distance Between The Apexes Of The Pressure Cones (A) | 104 mm | — | — |
| Temperature range | |||
| Operating temperature min.Tmin | -30 °C | — | — |
| Operating temperature min.Tmin | -22 °F | — | — |
| Operating temperature max.Tmax | 200 °C | — | — |
| Operating temperature max.Tmax | 392 °F | — | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.