Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions verified
“32052” across 3 loaded brands
At least two brands share the same bore, outside diameter and width. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | FAG32052-X>A260 × 400 × 87 mm | TIMKEN32052X260 × 400 × 87 mm | KOYO32052JR260 × 400 × 87 mm |
|---|---|---|---|
| Comparable specifications | |||
| Brand | FAG | TIMKEN | KOYO |
| Designation | 32052-X>A | 32052X | 32052JR |
| Product family | — | TS - Tapered Single | Single-row / Metric series |
| Detailed type | Tapered roller bearings | Tapered roller bearings | Tapered roller bearings |
| Series | 32052 | 32052X | — |
| Bore diameterd | 260 mm | 260 mm | 260 mm |
| Outside diameterD | 400 mm | 400 mm | 400 mm |
| WidthB | 87 mm | 87 mm | 87 mm |
| Basic dynamic load ratingC | 1150 kN | 1520 kN | 1470 kN |
| Basic static load ratingC0 | 2140 kN | 2440 kN | 2170 kN |
| Fatigue load limitPu | 229 kN | — | 221 kN |
| Reference speednref | 910 r/min | — | — |
| Limiting speednG | 1600 r/min | — | 770 r/min |
| Mass≈m | 38.2 kg | 37.92 kg | 39.5 kg |
| Precision class | PN — Normal (ISO 492:2023) | ABMA Class K | — |
| Sealing | — | Open | — |
| Cage | Standard — Sheet steel cage, window cage, roller-guided | Steel cage | — |
| Minimum operating temperatureTmin | -30 °C | — | — |
| Maximum operating temperatureTmax | 200 °C | — | — |
| Additional information | |||
| Comparative designation to ISO 10317 and ISO 355 | T4FC260 | — | — |
| Calculation Factors | |||
| K Factor | — | 1.34 | — |
| Y1 Factor | — | 1.38 | — |
| Y2 Factor | — | 0.00 | — |
| Y0 Factor | — | 0.76 | — |
| E Factor | — | 0.43 | — |
| Cg Factor | — | 0.1711 | — |
| Calculation factors | |||
| Limiting value of Fa/Fr for the applicability of diff. Values of factors X and Ye | 0.43 | — | — |
| Dynamic axial load factorY | 1.38 | — | — |
| Static axial load factorY0 | 0.76 | — | — |
| Capabilities & suitability | |||
| Radial load capacity | Yes | — | — |
| Axial load capacity in one direction | Yes | — | — |
| Suitable for grease lubrication | Yes | — | — |
| Suitable for oil lubrication | Yes | — | — |
| Unsealed design | Yes | — | — |
| Classification | |||
| Official Category Path | — | — | Tapered roller bearings - Single-row - Metric series |
| Official Classification 1 | — | — | Tapered roller bearings / Single-row / Metric series |
| Dimensions | |||
| Minimum chamfer dimension of inner ring back facer1, 2 min | 5 mm | — | — |
| Minimum chamfer dimension of inner ring back facer1, 2 min | 0.197 in | — | — |
| Minimum chamfer dimension of outer ring back facer3, 4 min | 4 mm | — | — |
| Minimum chamfer dimension of outer ring back facer3, 4 min | 0.157 in | — | — |
| Distance between the apexes of the pressure conesa | 86 mm | — | — |
| Distance between the apexes of the pressure conesa | 3.386 in | — | — |
| Guidance rib diameter of inner ringd1 | 331.5 mm | — | — |
| Guidance rib diameter of inner ringd1 | 13.051 in | — | — |
| Main Dimensions & Performance Data | |||
| Width, inner ringB | 87 mm | — | — |
| Width, inner ringB | 3.425 in | — | — |
| Width, outer ringC | 65 mm | — | — |
| Width, outer ringC | 2.559 in | — | — |
| Width, totalT | 87 mm | — | — |
| Width, totalT | 3.425 in | — | — |
| Basic dynamic load rating, radialCr | 1,150,000 N | — | — |
| Basic dynamic load rating, radialCr | 258,543.165 lbf | — | — |
| Basic static load rating, radialC0r | 2,140,000 N | — | — |
| Basic static load rating, radialC0r | 481,115.108 lbf | — | — |
| Fatigue load limit, radialCur | 229,000 N | — | — |
| Fatigue load limit, radialCur | 51,483.813 lbf | — | — |
| Thermal speed ratingnϑr | 910 1/min | — | — |
| Manufacturer Identity | |||
| Schaeffler Product Code | 384278 | — | — |
| Material Number | — | 000000000190019465 | — |
| Official Class Key | — | — | 050-010-010 |
| Base Type | 32052 | — | — |
| World Assembly Part Number | — | X32052X_Y32052X | — |
| Gpsd Group | F04 | — | — |
| Inner Ring Part Number | — | X32052X | — |
| Product Line Id | 70 | — | — |
| Outer Ring Part Number | — | Y32052X | — |
| Drawing Number | — | E-50757 | — |
| Upc | — | 0053893162423 | — |
| Official Source System | — | CORE BP - DS DF | — |
| Official Last Run | — | 2026-08-23T20:02:48.503 | — |
| SAP material number | 0935228780000 | — | — |
| Base product | 2305091001 | — | — |
| Bearing X designation | 32052-X | — | — |
| Mounting Manager ID | 32052-X | — | — |
| Grease application ID | 32052-X | — | — |
| Mounting dimensions | |||
| Maximum diameter of shaft shoulderda max | 287 mm | — | — |
| Maximum diameter of shaft shoulderda max | 11.299 in | — | — |
| Minimum diameter of shaft shoulderdb min | 278 mm | — | — |
| Minimum diameter of shaft shoulderdb min | 10.945 in | — | — |
| Minimum diameter of housing shoulderDa min | 352 mm | — | — |
| Minimum diameter of housing shoulderDa min | 13.858 in | — | — |
| Maximum diameter of housing shoulderDa max | 382 mm | — | — |
| Maximum diameter of housing shoulderDa max | 15.039 in | — | — |
| Minimum diameter of housing shoulderDb min | 383 mm | — | — |
| Minimum diameter of housing shoulderDb min | 15.079 in | — | — |
| Minimum axial spaceCa min | 14 mm | — | — |
| Minimum axial spaceCa min | 0.551 in | — | — |
| Minimum axial spaceCb min | 22 mm | — | — |
| Minimum axial spaceCb min | 0.866 in | — | — |
| Maximum fillet radius of shaftra max | 5 mm | — | — |
| Maximum fillet radius of shaftra max | 0.197 in | — | — |
| Maximum fillet radius of housingrb max | 4 mm | — | — |
| Maximum fillet radius of housingrb max | 0.157 in | — | — |
| Product characteristics | |||
| Tolerance classPN | Normal (ISO 492:2023) | — | — |
| Heat treatment | Standard | — | — |
| Quality level | Standard | — | — |
| Version code>A | Not marked on bearing | — | — |
| Number of rows1 | Single-row design | — | — |
| Product Identity | |||
| Construction | Tapered roller bearings 320, main dimensions acc. to DIN 720, separable | Single Row Tapered Roller Bearing Assembly | Imperial Series | 10.2362 in Bore | 15.7480 in OD | 3.4252 in Width | Open | Cylindrical Bore | Steel Cage | Precision ABMA Class K | — |
| Short Description | Tapered roller bearing | — | — |
| Type Description | — | TS - Tapered Single | — |
| Number Of Rows | — | 1 | — |
| Tapered Bore | — | N | — |
| Technical Data | |||
| d | — | — | 400 mm |
| T | — | — | 87 mm |
| Bore Diameter (D) | 260 mm | — | — |
| B | — | — | 87 mm |
| Outside Diameter (D) | 400 mm | — | — |
| C | — | — | 65 mm |
| Width (B) | 87 mm | — | — |
| Overall Width | — | 102.200 mm | — |
| R(Min.) | — | — | 5 mm |
| Basic Dynamic Load Rating, Radial (Cr) | 1,150,000 N | — | — |
| Radial Rating | — | 394,000 N | — |
| R1(Min.) | — | — | 4 mm |
| Basic Static Load Rating, Radial (C0R) | 2,140,000 N | — | — |
| Axial Rating | — | 293,000 N | — |
| Basic Load Ratings : Cr | — | — | 1470 kN |
| Operating Temperature Min. (Tmin) | -30 °C | — | — |
| Dynamic Rating C1 | — | 1,520,000 N | — |
| Basic Load Ratings : C0R | — | — | 2170 kN |
| Limiting Speed (Ng) | 1,600 1/min | — | — |
| Dynamic Rating C90 | — | 394,000 N | — |
| Fatigue Load Limit : Cu | — | — | 221 kN |
| Operating Temperature Max. (Tmax) | 200 °C | — | — |
| Dynamic Axial Rating Ca90 | — | 293,000 N | — |
| Limiting Speeds(Grease Lub.) | — | — | 770 min-1 |
| Reference Speed (Nϑr) | 910 1/min | — | — |
| Dynamic Axial Rating Ca1 | — | 1,130,000 N | — |
| Limiting Speeds(Oil Lub.) | — | — | 1000 min-1 |
| Maximum Fillet Radius Of Housing (Rb Max) | 4 mm | — | — |
| Static Radial Rating C0 | — | 2,440,000 N | — |
| Load Center Spread : A | — | — | 85.0 mm |
| Minimum Chamfer Dimension Of Outer Ring Back Face (R3, 4 M) | 4 mm | — | — |
| Extended Dynamic Rating Ce | — | 0 N | — |
| Constant E | — | — | 0.43 |
| Minimum Diameter Of Housing Shoulder (Da Min) | 352 mm | — | — |
| Static Axial Rating C0A | — | 3,090,000 N | — |
| Axial Load Factors : Y1 | — | — | 1.38 |
| Minimum Diameter Of Housing Shoulder (Db Min) | 383 mm | — | — |
| Axial Load Factors : Y0 | — | — | 0.76 |
| Width, Outer Ring (C) | 65 mm | — | — |
| Da(Min.) | — | — | 352 mm |
| Fatigue Load Limit, Radial (Cur) | 229,000 N | — | — |
| Db(Max.) | — | — | 287 mm |
| Limiting Value Of Fa/Fr For The Applicability Of Diff. Values Of Factors X And Y (E) | 0.43 | — | — |
| Da(Max.) | — | — | 382 mm |
| Maximum Diameter Of Shaft Shoulder (Da Max) | 287 mm | — | — |
| Db(Min.) | — | — | 383 mm |
| Minimum Diameter Of Shaft Shoulder (Db Min) | 278 mm | — | — |
| Sa(Min.) | — | — | 14 mm |
| Maximum Diameter Of Housing Shoulder (Da Max) | 382 mm | — | — |
| Sb(Min.) | — | — | 22 mm |
| Dynamic Axial Load Factor (Y) | 1.38 | — | — |
| Ra(Max.) | — | — | 4 mm |
| Maximum Fillet Radius (Ra Max) | 5 mm | — | — |
| Rb(Max.) | — | — | 3 mm |
| Minimum Axial Space (Cb Min) | 22 mm | — | — |
| Mass(Refer.) | — | — | 39.5 kg |
| Minimum Chamfer Dimension Of Inner Ring Back Face (R1, 2 M) | 5 mm | — | — |
| Guidance Rib Diameter Of Inner Ring (D1) | 331.5 mm | — | — |
| Minimum Axial Space (Ca Min) | 14 mm | — | — |
| Width, Inner Ring (B) | 87 mm | — | — |
| Static Axial Load Factor (Y0) | 0.76 | — | — |
| Distance Between The Apexes Of The Pressure Cones (A) | 86 mm | — | — |
| Temperature range | |||
| Operating temperature min.Tmin | -30 °C | — | — |
| Operating temperature min.Tmin | -22 °F | — | — |
| Operating temperature max.Tmax | 200 °C | — | — |
| Operating temperature max.Tmax | 392 °F | — | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.