Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Cross Reference centre · Interchange verification checklist · Understand suffix differences
You entered 32030-X-DF. This table explores the base group 32030; it does not preserve or approve every requested suffix. Search your complete marking first →
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions verified
“32030” across 3 loaded brands
At least two brands share the same bore, outside diameter and width. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | FAG32030-X150 × 225 × 48 mm | TIMKEN32030X150 × 225 × 48 mm | KOYO32030JR150 × 225 × 48 mm |
|---|---|---|---|
| Comparable specifications | |||
| Brand | FAG | TIMKEN | KOYO |
| Designation | 32030-X | 32030X | 32030JR |
| Product family | — | TS - Tapered Single | Single-row / Metric series |
| Detailed type | Tapered roller bearings | Tapered roller bearings | Tapered roller bearings |
| Series | 32030 | 32030X | — |
| Bore diameterd | 150 mm | 150 mm | 150 mm |
| Outside diameterD | 225 mm | 225 mm | 225 mm |
| WidthB | 48 mm | 48 mm | 48 mm |
| Basic dynamic load ratingC | 385 kN | 524 kN | 492 kN |
| Basic static load ratingC0 | 680 kN | 730 kN | 668 kN |
| Fatigue load limitPu | 75 kN | — | 79.6 kN |
| Reference speednref | 1990 r/min | — | — |
| Limiting speednG | 2900 r/min | — | 1500 r/min |
| Mass≈m | 6.499 kg | 6.42 kg | 6.41 kg |
| Precision class | P6X — Class 6X (ISO 492:2023) | ABMA Class N | — |
| Sealing | — | Open | — |
| Cage | Standard — Sheet steel cage, window cage, roller-guided | Steel cage | — |
| Minimum operating temperatureTmin | -30 °C | — | — |
| Maximum operating temperatureTmax | 200 °C | — | — |
| Additional information | |||
| Comparative designation to ISO 10317 and ISO 355 | T4EC150 | — | — |
| Calculation Factors | |||
| K Factor | — | 1.27 | — |
| Y1 Factor | — | 1.31 | — |
| Y2 Factor | — | 0.00 | — |
| Y0 Factor | — | 0.72 | — |
| E Factor | — | 0.46 | — |
| Cg Factor | — | 0.1314 | — |
| Calculation factors | |||
| Limiting value of Fa/Fr for the applicability of diff. Values of factors X and Ye | 0.46 | — | — |
| Dynamic axial load factorY | 1.31 | — | — |
| Static axial load factorY0 | 0.72 | — | — |
| Capabilities & suitability | |||
| Radial load capacity | Yes | — | — |
| Axial load capacity in one direction | Yes | — | — |
| Suitable for grease lubrication | Yes | — | — |
| Suitable for oil lubrication | Yes | — | — |
| Unsealed design | Yes | — | — |
| Classification | |||
| Official Category Path | — | — | Tapered roller bearings - Single-row - Metric series |
| Official Classification 1 | — | — | Tapered roller bearings / Single-row / Metric series |
| Dimensions | |||
| Minimum chamfer dimension of inner ring back facer1, 2 min | 3 mm | — | — |
| Minimum chamfer dimension of inner ring back facer1, 2 min | 0.118 in | — | — |
| Minimum chamfer dimension of outer ring back facer3, 4 min | 2.5 mm | — | — |
| Minimum chamfer dimension of outer ring back facer3, 4 min | 0.098 in | — | — |
| Distance between the apexes of the pressure conesa | 50 mm | — | — |
| Distance between the apexes of the pressure conesa | 1.969 in | — | — |
| Guidance rib diameter of inner ringd1 | 188 mm | — | — |
| Guidance rib diameter of inner ringd1 | 7.402 in | — | — |
| Main Dimensions & Performance Data | |||
| Width, inner ringB | 48 mm | — | — |
| Width, inner ringB | 1.89 in | — | — |
| Width, outer ringC | 36 mm | — | — |
| Width, outer ringC | 1.417 in | — | — |
| Width, totalT | 48 mm | — | — |
| Width, totalT | 1.89 in | — | — |
| Basic dynamic load rating, radialCr | 385,000 N | — | — |
| Basic dynamic load rating, radialCr | 86,555.755 lbf | — | — |
| Basic static load rating, radialC0r | 680,000 N | — | — |
| Basic static load rating, radialC0r | 152,877.698 lbf | — | — |
| Fatigue load limit, radialCur | 75,000 N | — | — |
| Fatigue load limit, radialCur | 16,861.511 lbf | — | — |
| Thermal speed ratingnϑr | 1,990 1/min | — | — |
| Manufacturer Identity | |||
| Schaeffler Product Code | 384247 | — | — |
| Material Number | — | 000000000190059598 | — |
| Official Class Key | — | — | 050-010-010 |
| Base Type | 32030 | — | — |
| World Assembly Part Number | — | X32030XG_Y32030XG | — |
| Gpsd Group | F05 | — | — |
| Inner Ring Part Number | — | X32030XG | — |
| Product Line Id | 64 | — | — |
| Outer Ring Part Number | — | Y32030XG | — |
| Drawing Number | — | C-112749 | — |
| Upc | — | 0053893926186 | — |
| Official Source System | — | CORE BP - DS DF | — |
| Official Last Run | — | 2026-08-23T20:02:47.383 | — |
| SAP material number | 0167119040000 | — | — |
| Base product | 2305091001 | — | — |
| Bearing X designation | 32030-X | — | — |
| Mounting Manager ID | 32030-X | — | — |
| Grease application ID | 32030-X | — | — |
| Mounting dimensions | |||
| Maximum diameter of shaft shoulderda max | 164 mm | — | — |
| Maximum diameter of shaft shoulderda max | 6.457 in | — | — |
| Minimum diameter of shaft shoulderdb min | 162 mm | — | — |
| Minimum diameter of shaft shoulderdb min | 6.378 in | — | — |
| Minimum diameter of housing shoulderDa min | 200 mm | — | — |
| Minimum diameter of housing shoulderDa min | 7.874 in | — | — |
| Maximum diameter of housing shoulderDa max | 213 mm | — | — |
| Maximum diameter of housing shoulderDa max | 8.386 in | — | — |
| Minimum diameter of housing shoulderDb min | 216 mm | — | — |
| Minimum diameter of housing shoulderDb min | 8.504 in | — | — |
| Minimum axial spaceCa min | 8 mm | — | — |
| Minimum axial spaceCa min | 0.315 in | — | — |
| Minimum axial spaceCb min | 12 mm | — | — |
| Minimum axial spaceCb min | 0.472 in | — | — |
| Maximum fillet radius of shaftra max | 3 mm | — | — |
| Maximum fillet radius of shaftra max | 0.118 in | — | — |
| Maximum fillet radius of housingrb max | 2.5 mm | — | — |
| Maximum fillet radius of housingrb max | 0.098 in | — | — |
| Product characteristics | |||
| Tolerance classP6X | Class 6X (ISO 492:2023) | — | — |
| Heat treatment | Standard | — | — |
| Quality level | Standard | — | — |
| Number of rows1 | Single-row design | — | — |
| Product Identity | |||
| Construction | Tapered roller bearings 320, main dimensions acc. to DIN 720, separable | Single Row Tapered Roller Bearing Assembly | Imperial Series | 5.9055 in Bore | 8.8583 in OD | 1.8898 in Width | Open | Cylindrical Bore | Steel Cage | Precision ABMA Class N | — |
| Short Description | Tapered roller bearing | — | — |
| Type Description | — | TS - Tapered Single | — |
| Number Of Rows | — | 1 | — |
| Tapered Bore | — | N | — |
| Technical Data | |||
| d | — | — | 225 mm |
| T | — | — | 48 mm |
| Bore Diameter (D) | 150 mm | — | — |
| B | — | — | 48 mm |
| Outside Diameter (D) | 225 mm | — | — |
| C | — | — | 36 mm |
| Width (B) | 48 mm | — | — |
| Overall Width | — | 56.100 mm | — |
| R(Min.) | — | — | 3 mm |
| Basic Dynamic Load Rating, Radial (Cr) | 385,000 N | — | — |
| Radial Rating | — | 136,000 N | — |
| R1(Min.) | — | — | 2.5 mm |
| Basic Static Load Rating, Radial (C0R) | 680,000 N | — | — |
| Axial Rating | — | 107,000 N | — |
| Basic Load Ratings : Cr | — | — | 492 kN |
| Operating Temperature Min. (Tmin) | -30 °C | — | — |
| Dynamic Rating C1 | — | 524,000 N | — |
| Basic Load Ratings : C0R | — | — | 668 kN |
| Limiting Speed (Ng) | 2,900 1/min | — | — |
| Dynamic Rating C90 | — | 136,000 N | — |
| Fatigue Load Limit : Cu | — | — | 79.6 kN |
| Operating Temperature Max. (Tmax) | 200 °C | — | — |
| Dynamic Axial Rating Ca90 | — | 107,000 N | — |
| Limiting Speeds(Grease Lub.) | — | — | 1500 min-1 |
| Reference Speed (Nϑr) | 1,990 1/min | — | — |
| Dynamic Axial Rating Ca1 | — | 412,000 N | — |
| Limiting Speeds(Oil Lub.) | — | — | 2000 min-1 |
| Maximum Fillet Radius Of Housing (Rb Max) | 2.5 mm | — | — |
| Static Radial Rating C0 | — | 730,000 N | — |
| Load Center Spread : A | — | — | 48.8 mm |
| Minimum Chamfer Dimension Of Outer Ring Back Face (R3, 4 M) | 2.5 mm | — | — |
| Extended Dynamic Rating Ce | — | 0 N | — |
| Constant E | — | — | 0.46 |
| Minimum Diameter Of Housing Shoulder (Da Min) | 200 mm | — | — |
| Static Axial Rating C0A | — | 975,000 N | — |
| Axial Load Factors : Y1 | — | — | 1.31 |
| Minimum Diameter Of Housing Shoulder (Db Min) | 216 mm | — | — |
| Axial Load Factors : Y0 | — | — | 0.72 |
| Width, Outer Ring (C) | 36 mm | — | — |
| Da(Min.) | — | — | 200 mm |
| Fatigue Load Limit, Radial (Cur) | 75,000 N | — | — |
| Db(Max.) | — | — | 164 mm |
| Limiting Value Of Fa/Fr For The Applicability Of Diff. Values Of Factors X And Y (E) | 0.46 | — | — |
| Da(Max.) | — | — | 213 mm |
| Maximum Diameter Of Shaft Shoulder (Da Max) | 164 mm | — | — |
| Db(Min.) | — | — | 216 mm |
| Minimum Diameter Of Shaft Shoulder (Db Min) | 162 mm | — | — |
| Sa(Min.) | — | — | 8 mm |
| Maximum Diameter Of Housing Shoulder (Da Max) | 213 mm | — | — |
| Sb(Min.) | — | — | 12 mm |
| Dynamic Axial Load Factor (Y) | 1.31 | — | — |
| Ra(Max.) | — | — | 2.5 mm |
| Maximum Fillet Radius (Ra Max) | 3 mm | — | — |
| Rb(Max.) | — | — | 2 mm |
| Minimum Axial Space (Cb Min) | 12 mm | — | — |
| Mass(Refer.) | — | — | 6.41 kg |
| Minimum Chamfer Dimension Of Inner Ring Back Face (R1, 2 M) | 3 mm | — | — |
| Guidance Rib Diameter Of Inner Ring (D1) | 188 mm | — | — |
| Minimum Axial Space (Ca Min) | 8 mm | — | — |
| Width, Inner Ring (B) | 48 mm | — | — |
| Static Axial Load Factor (Y0) | 0.72 | — | — |
| Distance Between The Apexes Of The Pressure Cones (A) | 50 mm | — | — |
| Temperature range | |||
| Operating temperature min.Tmin | -30 °C | — | — |
| Operating temperature min.Tmin | -22 °F | — | — |
| Operating temperature max.Tmax | 200 °C | — | — |
| Operating temperature max.Tmax | 392 °F | — | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.