Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions verified
“32011” across 3 loaded brands
At least two brands share the same bore, outside diameter and width. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | FAG32011-X55 × 90 × 23 mm | TIMKEN32011X55 × 90 × 23 mm | KOYO32011JR55 × 90 × 23 mm |
|---|---|---|---|
| Comparable specifications | |||
| Brand | FAG | TIMKEN | KOYO |
| Designation | 32011-X | 32011X | 32011JR |
| Product family | — | TS - Tapered Single | Single-row / Metric series |
| Detailed type | Tapered roller bearings | Tapered roller bearings | Tapered roller bearings |
| Series | 32011 | 32011X | — |
| Bore diameterd | 55 mm | 55 mm | 55 mm |
| Outside diameterD | 90 mm | 90 mm | 90 mm |
| WidthB | 23 mm | 23 mm | 23 mm |
| Basic dynamic load ratingC | 81 kN | 112 kN | 106 kN |
| Basic static load ratingC0 | 118 kN | 126 kN | 121 kN |
| Fatigue load limitPu | 14.9 kN | — | 18.2 kN |
| Reference speednref | 4600 r/min | — | — |
| Limiting speednG | 7700 r/min | — | 4100 r/min |
| Mass≈m | 0.561 kg | 0.56 kg | 0.569 kg |
| Precision class | P6X — Class 6X (ISO 492:2023) | ABMA Class K | — |
| Sealing | — | Open | — |
| Cage | Standard — Sheet steel cage, window cage, roller-guided | Steel cage | — |
| Minimum operating temperatureTmin | -30 °C | — | — |
| Maximum operating temperatureTmax | 120 °C | — | — |
| Additional information | |||
| Comparative designation to ISO 10317 and ISO 355 | T3CC055 | — | — |
| Calculation Factors | |||
| K Factor | — | 1.44 | — |
| Y1 Factor | — | 1.48 | — |
| Y2 Factor | — | 0.00 | — |
| Y0 Factor | — | 0.81 | — |
| E Factor | — | 0.41 | — |
| Cg Factor | — | 0.0931 | — |
| Calculation factors | |||
| Limiting value of Fa/Fr for the applicability of diff. Values of factors X and Ye | 0.41 | — | — |
| Dynamic axial load factorY | 1.48 | — | — |
| Static axial load factorY0 | 0.81 | — | — |
| Capabilities & suitability | |||
| Radial load capacity | Yes | — | — |
| Axial load capacity in one direction | Yes | — | — |
| Suitable for grease lubrication | Yes | — | — |
| Suitable for oil lubrication | Yes | — | — |
| Unsealed design | Yes | — | — |
| Classification | |||
| Official Category Path | — | — | Tapered roller bearings - Single-row - Metric series |
| Official Classification 1 | — | — | Tapered roller bearings / Single-row / Metric series |
| Dimensions | |||
| Minimum chamfer dimension of inner ring back facer1, 2 min | 1.5 mm | — | — |
| Minimum chamfer dimension of inner ring back facer1, 2 min | 0.059 in | — | — |
| Minimum chamfer dimension of outer ring back facer3, 4 min | 1.5 mm | — | — |
| Minimum chamfer dimension of outer ring back facer3, 4 min | 0.059 in | — | — |
| Distance between the apexes of the pressure conesa | 20 mm | — | — |
| Distance between the apexes of the pressure conesa | 0.787 in | — | — |
| Guidance rib diameter of inner ringd1 | 75.1 mm | — | — |
| Guidance rib diameter of inner ringd1 | 2.957 in | — | — |
| Main Dimensions & Performance Data | |||
| Width, inner ringB | 23 mm | — | — |
| Width, inner ringB | 0.906 in | — | — |
| Width, outer ringC | 17.5 mm | — | — |
| Width, outer ringC | 0.689 in | — | — |
| Width, totalT | 23 mm | — | — |
| Width, totalT | 0.906 in | — | — |
| Basic dynamic load rating, radialCr | 81,000 N | — | — |
| Basic dynamic load rating, radialCr | 18,210.432 lbf | — | — |
| Basic static load rating, radialC0r | 118,000 N | — | — |
| Basic static load rating, radialC0r | 26,528.777 lbf | — | — |
| Fatigue load limit, radialCur | 14,900 N | — | — |
| Fatigue load limit, radialCur | 3,349.82 lbf | — | — |
| Thermal speed ratingnϑr | 4,600 1/min | — | — |
| Manufacturer Identity | |||
| Schaeffler Product Code | 384188 | — | — |
| Material Number | — | 000000000100041871 | — |
| Official Class Key | — | — | 050-010-010 |
| Base Type | 32011 | — | — |
| World Assembly Part Number | — | X32011X_Y32011X | — |
| Gpsd Group | F05 | — | — |
| Inner Ring Part Number | — | X32011X | — |
| Product Line Id | 36 | — | — |
| Outer Ring Part Number | — | Y32011X | — |
| Drawing Number | — | A-43419 | — |
| Upc | — | 0053893824369 | — |
| Official Source System | — | CORE BP - DS DF | — |
| Official Last Run | — | 2026-08-23T20:02:47.163 | — |
| SAP material number | 0167116290000 | — | — |
| Base product | 2305091001 | — | — |
| Bearing X designation | 32011-X | — | — |
| Mounting Manager ID | 32011-X | — | — |
| Grease application ID | 32011-X | — | — |
| Mounting dimensions | |||
| Maximum diameter of shaft shoulderda max | 63 mm | — | — |
| Maximum diameter of shaft shoulderda max | 2.48 in | — | — |
| Minimum diameter of shaft shoulderdb min | 62 mm | — | — |
| Minimum diameter of shaft shoulderdb min | 2.441 in | — | — |
| Minimum diameter of housing shoulderDa min | 81 mm | — | — |
| Minimum diameter of housing shoulderDa min | 3.189 in | — | — |
| Maximum diameter of housing shoulderDa max | 83 mm | — | — |
| Maximum diameter of housing shoulderDa max | 3.268 in | — | — |
| Minimum diameter of housing shoulderDb min | 86 mm | — | — |
| Minimum diameter of housing shoulderDb min | 3.386 in | — | — |
| Minimum axial spaceCa min | 4 mm | — | — |
| Minimum axial spaceCa min | 0.157 in | — | — |
| Minimum axial spaceCb min | 5.5 mm | — | — |
| Minimum axial spaceCb min | 0.217 in | — | — |
| Maximum fillet radius of shaftra max | 1.5 mm | — | — |
| Maximum fillet radius of shaftra max | 0.059 in | — | — |
| Maximum fillet radius of housingrb max | 1.5 mm | — | — |
| Maximum fillet radius of housingrb max | 0.059 in | — | — |
| Product characteristics | |||
| Tolerance classP6X | Class 6X (ISO 492:2023) | — | — |
| Heat treatment | Standard | — | — |
| Quality level | Standard | — | — |
| Number of rows1 | Single-row design | — | — |
| Product Identity | |||
| Construction | Tapered roller bearings 320, main dimensions acc. to DIN 720, separable | Single Row Tapered Roller Bearing Assembly | Imperial Series | 2.1654 in Bore | 3.5433 in OD | 0.9055 in Width | Open | Cylindrical Bore | Steel Cage | Precision ABMA Class K | — |
| Short Description | Tapered roller bearing | — | — |
| Type Description | — | TS - Tapered Single | — |
| Number Of Rows | — | 1 | — |
| Tapered Bore | — | N | — |
| Technical Data | |||
| d | — | — | 90 mm |
| T | — | — | 23 mm |
| Bore Diameter (D) | 55 mm | — | — |
| B | — | — | 23 mm |
| Outside Diameter (D) | 90 mm | — | — |
| C | — | — | 17.5 mm |
| Width (B) | 23 mm | — | — |
| Overall Width | — | 26.800 mm | — |
| R(Min.) | — | — | 1.5 mm |
| Basic Dynamic Load Rating, Radial (Cr) | 81,000 N | — | — |
| Radial Rating | — | 29,100 N | — |
| R1(Min.) | — | — | 1.5 mm |
| Basic Static Load Rating, Radial (C0R) | 118,000 N | — | — |
| Axial Rating | — | 20,300 N | — |
| Basic Load Ratings : Cr | — | — | 106 kN |
| Operating Temperature Min. (Tmin) | -30 °C | — | — |
| Dynamic Rating C1 | — | 112,000 N | — |
| Basic Load Ratings : C0R | — | — | 121 kN |
| Limiting Speed (Ng) | 7,700 1/min | — | — |
| Dynamic Rating C90 | — | 29,100 N | — |
| Fatigue Load Limit : Cu | — | — | 18.2 kN |
| Operating Temperature Max. (Tmax) | 120 °C | — | — |
| Dynamic Axial Rating Ca90 | — | 20,300 N | — |
| Limiting Speeds(Grease Lub.) | — | — | 4100 min-1 |
| Reference Speed (Nϑr) | 4,600 1/min | — | — |
| Dynamic Axial Rating Ca1 | — | 78,300 N | — |
| Limiting Speeds(Oil Lub.) | — | — | 5500 min-1 |
| Maximum Fillet Radius Of Housing (Rb Max) | 1.5 mm | — | — |
| Static Radial Rating C0 | — | 126,000 N | — |
| Load Center Spread : A | — | — | 19.8 mm |
| Minimum Chamfer Dimension Of Outer Ring Back Face (R3, 4 M) | 1.5 mm | — | — |
| Extended Dynamic Rating Ce | — | 0 N | — |
| Constant E | — | — | 0.41 |
| Minimum Diameter Of Housing Shoulder (Da Min) | 81 mm | — | — |
| Static Axial Rating C0A | — | 149,000 N | — |
| Axial Load Factors : Y1 | — | — | 1.48 |
| Minimum Diameter Of Housing Shoulder (Db Min) | 86 mm | — | — |
| Axial Load Factors : Y0 | — | — | 0.81 |
| Width, Outer Ring (C) | 17.5 mm | — | — |
| Da(Min.) | — | — | 81 mm |
| Fatigue Load Limit, Radial (Cur) | 14,900 N | — | — |
| Db(Max.) | — | — | 63 mm |
| Limiting Value Of Fa/Fr For The Applicability Of Diff. Values Of Factors X And Y (E) | 0.41 | — | — |
| Da(Max.) | — | — | 81.5 mm |
| Maximum Diameter Of Shaft Shoulder (Da Max) | 63 mm | — | — |
| Db(Min.) | — | — | 86 mm |
| Minimum Diameter Of Shaft Shoulder (Db Min) | 62 mm | — | — |
| Sa(Min.) | — | — | 4 mm |
| Maximum Diameter Of Housing Shoulder (Da Max) | 83 mm | — | — |
| Sb(Min.) | — | — | 5.5 mm |
| Dynamic Axial Load Factor (Y) | 1.48 | — | — |
| Ra(Max.) | — | — | 1.5 mm |
| Maximum Fillet Radius (Ra Max) | 1.5 mm | — | — |
| Rb(Max.) | — | — | 1.5 mm |
| Minimum Axial Space (Cb Min) | 5.5 mm | — | — |
| Mass(Refer.) | — | — | 0.569 kg |
| Minimum Chamfer Dimension Of Inner Ring Back Face (R1, 2 M) | 1.5 mm | — | — |
| Guidance Rib Diameter Of Inner Ring (D1) | 75.1 mm | — | — |
| Minimum Axial Space (Ca Min) | 4 mm | — | — |
| Width, Inner Ring (B) | 23 mm | — | — |
| Static Axial Load Factor (Y0) | 0.81 | — | — |
| Distance Between The Apexes Of The Pressure Cones (A) | 20 mm | — | — |
| Temperature range | |||
| Operating temperature min.Tmin | -30 °C | — | — |
| Operating temperature min.Tmin | -22 °F | — | — |
| Operating temperature max.Tmax | 120 °C | — | — |
| Operating temperature max.Tmax | 248 °F | — | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.