Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions verified
“3200” across 2 loaded brands
At least two brands share the same bore, outside diameter and width. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | SKF3200 ATN910 × 30 × 14 mm | FAG3200-BB-TVH10 × 30 × 14 mm |
|---|---|---|
| Comparable specifications | ||
| Brand | SKF | FAG |
| Designation | 3200 ATN9 | 3200-BB-TVH |
| Product family | Angular contact ball bearings | — |
| Detailed type | Double row angular contact ball bearing | Angular contact ball bearings |
| Series | — | 3200 |
| Bore diameterd | 10 mm | 10 mm |
| Outside diameterD | 30 mm | 30 mm |
| WidthB | 14 mm | 14 mm |
| Basic dynamic load ratingC | 7.61 kN | 7.8 kN |
| Basic static load ratingC0 | 4.3 kN | 4.45 kN |
| Fatigue load limitPu | 0.183 kN | 0.233 kN |
| Reference speednref | 26000 r/min | 21000 r/min |
| Limiting speednG | 24000 r/min | 28000 r/min |
| Mass≈m | 0.0489 kg | 0.051 kg |
| Precision class | — | PN — Normal (ISO 492:2023) |
| Sealing | Without | Without — Not sealed |
| Cage | Non-metallic | TVH — Solid cage made of glass-fiber reinforced polyamide PA66 |
| Bearing material | Bearing steel | — |
| Lubricant | None | GA13 — Ball bearing and insert bearing grease |
| Minimum operating temperatureTmin | — | -30 °C |
| Maximum operating temperatureTmax | — | 120 °C |
| Capabilities & suitability | ||
| Radial load capacity | — | Yes |
| Axial load capacity in one direction | — | Yes |
| Axial load capacity in both directions | — | Yes |
| Suitable for grease lubrication | — | Yes |
| Suitable for oil lubrication | — | Yes |
| Unsealed design | — | Yes |
| Dimensions | ||
| Contact angle | 30.0 ° | — |
| Minimum chamfer dimensionrmin | — | 0.6 mm |
| Minimum chamfer dimensionrmin | — | 0.024 in |
| Shoulder diameter outer ringD1 | — | 23 mm |
| Shoulder diameter outer ringD1 | — | 0.906 in |
| Caliber diameter outer ringD2 | — | 24.75 mm |
| Caliber diameter outer ringD2 | — | 0.974 in |
| Shoulder diameter inner ringd1 | — | 16.6 mm |
| Shoulder diameter inner ringd1 | — | 0.654 in |
| Caliber diamter inner ringd2 | — | 15.49 mm |
| Caliber diamter inner ringd2 | — | 0.61 in |
| Distance between the apexes of the pressure conesa | — | 14.8 mm |
| Distance between the apexes of the pressure conesa | — | 0.583 in |
| Contact angleα | — | 25 ° |
| Engineering — Abutment dimensions | ||
| Abutment diameter shaftd a | min. 14.4 mm | — |
| Abutment diameter housingD a | max. 25.6 mm | — |
| Fillet radiusr a | max. 0.6 mm | — |
| Engineering — Calculation data | ||
| Calculation factork r | 0.06 | — |
| Limiting valuee | 0.8 | — |
| Calculation factorX | 0.63 | — |
| Calculation factorY 0 | 0.66 | — |
| Calculation factorY 1 | 0.78 | — |
| Calculation factorY 2 | 1.2 | — |
| Engineering — Dimensions | ||
| Recess diameter inner ring shoulderd 2 | ≈ 15.8 mm | — |
| Recess diameter outer ring shoulderD 2 | ≈ 24.95 mm | — |
| Chamfer dimension inner ringr 1,2 | min. 0.6 mm | — |
| Distance pressure point(s)a | 16 mm | — |
| Logistics | ||
| Product net weight | 0.0489 kg | — |
| eClass code | 23-05-08-03 | — |
| UNSPSC code | 31171531 | — |
| Main Dimensions & Performance Data | ||
| Basic dynamic load rating, radialCr | — | 7,800 N |
| Basic dynamic load rating, radialCr | — | 1,753.597 lbf |
| Basic static load rating, radialC0r | — | 4,450 N |
| Basic static load rating, radialC0r | — | 1,000.45 lbf |
| Fatigue load limit, radialCur | — | 233 N |
| Fatigue load limit, radialCur | — | 52.383 lbf |
| Manufacturer Identity | ||
| Schaeffler Product Code | — | 360758 |
| Base Type | — | 3200 |
| Old Designation | — | ["3200-B-TVH","3200BB.TVH"] |
| Gpsd Group | — | S03 |
| Product Line Id | — | 14 |
| X Life Marking | — | n.r. |
| SAP material number | — | 0205032370000 |
| Base product | — | 2305080302 |
| Bearing X designation | — | 3200-BB-TVH |
| Mounting Manager ID | — | 3200-BB-TVH |
| Grease application ID | — | 3200-BB-TVH |
| Mounting dimensions | ||
| Minimum diameter shaft shoulderda min | — | 14.2 mm |
| Minimum diameter shaft shoulderda min | — | 0.559 in |
| Maximum diameter of housing shoulderDa max | — | 25.8 mm |
| Maximum diameter of housing shoulderDa max | — | 1.016 in |
| Maximum fillet radiusra max | — | 0.6 mm |
| Maximum fillet radiusra max | — | 0.024 in |
| Product characteristics | ||
| Design variantB | — | Bearing without filling slot |
| Changed internal design | — | B |
| Type of SealWithout | — | Not sealed |
| Tolerance classPN | — | Normal (ISO 492:2023) |
| Dimensional / heat stabilizationSN | — | Rings dimensional stabilized up to 120° |
| Axial internal clearanceCN | — | Group N (CN) |
| Product identity | ||
| Official product category | Angular contact ball bearings | — |
| Official taxonomy path | /products/rolling-bearings/ball-bearings/angular-contact-ball-bearings/double-row-angular-contact-ball-bearings | — |
| Structure group ID | BA2_001 | — |
| Available from SKF | Yes | — |
| Remanufacturable | No | — |
| Product Identity | ||
| Construction | — | Angular contact ball bearing 32..-B-TVH, double row, plastic cage |
| Short Description | — | Angular contact ball bearing |
| Properties | ||
| Contact type | Normal contact (two-point contact) | — |
| Number of rows | 2 | — |
| Locating feature, bearing outer ring | Without | — |
| Ring type | One-piece inner and outer rings | — |
| Arrangement of contact angle (double-row bearing) | Back-to-back (O) | — |
| Matched arrangement | No | — |
| Universal matching bearing | No | — |
| Axial internal clearance | CN | — |
| Material, bearing | Bearing steel | — |
| Coating | Without | — |
| Relubrication feature | Without | — |
| Indicative carbon footprint for new product | 0.18 kg CO 2 e | — |
| Technical Data | ||
| Bore Diameter (D) | — | 10 mm |
| Outside Diameter (D) | — | 30 mm |
| Width (B) | — | 14 mm |
| Basic Dynamic Load Rating, Radial (Cr) | — | 7,800 N |
| Basic Static Load Rating, Radial (C0R) | — | 4,450 N |
| Operating Temperature Min. (Tmin) | — | -30 °C |
| Limiting Speed (Ng) | — | 28,000 1/min |
| Operating Temperature Max. (Tmax) | — | 120 °C |
| Reference Speed (Nϑr) | — | 21,000 1/min |
| Caliber Diameter Outer Ring (D2) | — | 24.75 mm |
| Fatigue Load Limit, Radial (Cur) | — | 233 N |
| Minimum Diameter Shaft Shoulder (Da Min) | — | 14.2 mm |
| Shoulder Diameter Inner Ring (D1) | — | 16.6 mm |
| Maximum Diameter Of Housing Shoulder (Da Max) | — | 25.8 mm |
| Minimum Chamfer Dimension (Rmin) | — | 0.6 mm |
| Caliber Diameter Inner Ring (D1) | — | 15.49 mm |
| Maximum Fillet Radius (Ra Max) | — | 0.6 mm |
| Shoulder Diameter Outer Ring (D1) | — | 23 mm |
| Contact Angle (Α) | — | 25 ° |
| Distance Between The Apexes Of The Pressure Cones (A) | — | 14.8 mm |
| Temperature range | ||
| Operating temperature min.Tmin | — | -30 °C |
| Operating temperature min.Tmin | — | -22 °F |
| Operating temperature max.Tmax | — | 120 °C |
| Operating temperature max.Tmax | — | 248 °F |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.