Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Cross Reference centre · Interchange verification checklist · Understand suffix differences
You entered 30332-A. This table explores the base group 30332; it does not preserve or approve every requested suffix. Search your complete marking first →
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions differ
“30332” across 3 loaded brands
The base designation is shared, but the loaded boundary dimensions do not agree. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | SKF30332 J2160 × 340 × mm | FAG30332-A160 × 340 × 75 mm | KOYO30332D160 × 340 × 68 mm |
|---|---|---|---|
| Comparable specifications | |||
| Brand | SKF | FAG | KOYO |
| Designation | 30332 J2 | 30332-A | 30332D |
| Product family | Tapered roller bearings | — | Single-row / Metric series |
| Detailed type | Single row tapered roller bearing | Tapered roller bearings | Tapered roller bearings |
| Series | — | 30332 | — |
| Bore diameterd | 160 mm | 160 mm | 160 mm |
| Outside diameterD | 340 mm | 340 mm | 340 mm |
| WidthB | — | 75 mm | 68 mm |
| Basic dynamic load ratingC | 913 kN | 890 kN | 926 kN |
| Basic static load ratingC0 | 1180 kN | 1140 kN | 933 kN |
| Fatigue load limitPu | — | 126 kN | 104 kN |
| Reference speednref | 1500 r/min | 1500 r/min | — |
| Limiting speednG | 2000 r/min | 2130 r/min | 900 r/min |
| Mass≈m | 28.9 kg | 29.6 kg | 29.1 kg |
| Precision class | — | PN — Normal (ISO 492:2023) | — |
| Sealing | Without | — | — |
| Cage | Sheet metal | Standard — Sheet steel cage, window cage, roller-guided | — |
| Lubricant | None | — | — |
| Minimum operating temperatureTmin | — | -30 °C | — |
| Maximum operating temperatureTmax | — | 200 °C | — |
| Additional information | |||
| Comparative designation to ISO 10317 and ISO 355 | — | T2GB160 | — |
| Calculation factors | |||
| Limiting value of Fa/Fr for the applicability of diff. Values of factors X and Ye | — | 0.35 | — |
| Dynamic axial load factorY | — | 1.74 | — |
| Static axial load factorY0 | — | 0.96 | — |
| Capabilities & suitability | |||
| Radial load capacity | — | Yes | — |
| Axial load capacity in one direction | — | Yes | — |
| Suitable for grease lubrication | — | Yes | — |
| Suitable for oil lubrication | — | Yes | — |
| Unsealed design | — | Yes | — |
| Largebearing | — | Yes | — |
| Classification | |||
| Official Category Path | — | — | Tapered roller bearings - Single-row - Metric series |
| Official Classification 1 | — | — | Tapered roller bearings / Single-row / Metric series |
| Dimensions | |||
| Width, total | 75.0 mm | — | — |
| Width, inner ring | 68.0 mm | — | — |
| Width, outer ring | 58.0 mm | — | — |
| Contact angle | 13.0 ° | — | — |
| Minimum chamfer dimension of inner ring back facer1, 2 min | — | 5 mm | — |
| Minimum chamfer dimension of inner ring back facer1, 2 min | — | 0.197 in | — |
| Minimum chamfer dimension of outer ring back facer3, 4 min | — | 4 mm | — |
| Minimum chamfer dimension of outer ring back facer3, 4 min | — | 0.157 in | — |
| Distance between the apexes of the pressure conesa | — | 63 mm | — |
| Distance between the apexes of the pressure conesa | — | 2.48 in | — |
| Guidance rib diameter of inner ringd1 | — | 237 mm | — |
| Guidance rib diameter of inner ringd1 | — | 9.331 in | — |
| Logistics | |||
| Product net weight | 28.9 kg | — | — |
| eClass code | 23-05-09-10 | — | — |
| UNSPSC code | 31171516 | — | — |
| Main Dimensions & Performance Data | |||
| Width, inner ringB | — | 68 mm | — |
| Width, inner ringB | — | 2.677 in | — |
| Width, outer ringC | — | 58 mm | — |
| Width, outer ringC | — | 2.283 in | — |
| Width, totalT | — | 75 mm | — |
| Width, totalT | — | 2.953 in | — |
| Basic dynamic load rating, radialCr | — | 890,000 N | — |
| Basic dynamic load rating, radialCr | — | 200,089.928 lbf | — |
| Basic static load rating, radialC0r | — | 1,140,000 N | — |
| Basic static load rating, radialC0r | — | 256,294.964 lbf | — |
| Fatigue load limit, radialCur | — | 126,000 N | — |
| Fatigue load limit, radialCur | — | 28,327.338 lbf | — |
| Thermal speed ratingnϑr | — | 1,500 1/min | — |
| Manufacturer Identity | |||
| Schaeffler Product Code | — | 383464 | — |
| Official Class Key | — | — | 050-010-010 |
| Base Type | — | 30332 | — |
| Old Designation | — | ["30332A"] | — |
| Gpsd Group | — | F04 | — |
| Product Line Id | — | 70 | — |
| X Life Marking | — | n.r. | — |
| SAP material number | — | 0190529790000 | — |
| Base product | — | 2305091001 | — |
| Bearing X designation | — | 30332-A | — |
| Mounting Manager ID | — | 30332-A | — |
| Grease application ID | — | 30332-A | — |
| Mounting dimensions | |||
| Maximum diameter of shaft shoulderda max | — | 201 mm | — |
| Maximum diameter of shaft shoulderda max | — | 7.913 in | — |
| Minimum diameter of shaft shoulderdb min | — | 178 mm | — |
| Minimum diameter of shaft shoulderdb min | — | 7.008 in | — |
| Minimum diameter of housing shoulderDa min | — | 290 mm | — |
| Minimum diameter of housing shoulderDa min | — | 11.417 in | — |
| Maximum diameter of housing shoulderDa max | — | 319 mm | — |
| Maximum diameter of housing shoulderDa max | — | 12.559 in | — |
| Minimum diameter of housing shoulderDb min | — | 310 mm | — |
| Minimum diameter of housing shoulderDb min | — | 12.205 in | — |
| Minimum axial spaceCa min | — | 9 mm | — |
| Minimum axial spaceCa min | — | 0.354 in | — |
| Minimum axial spaceCb min | — | 17 mm | — |
| Minimum axial spaceCb min | — | 0.669 in | — |
| Maximum fillet radius of shaftra max | — | 5 mm | — |
| Maximum fillet radius of shaftra max | — | 0.197 in | — |
| Maximum fillet radius of housingrb max | — | 4 mm | — |
| Maximum fillet radius of housingrb max | — | 0.157 in | — |
| Product characteristics | |||
| Tolerance classPN | — | Normal (ISO 492:2023) | — |
| Heat treatment | — | Standard | — |
| Internal design | — | Standard | — |
| Quality level | — | Standard | — |
| Number of rows1 | — | Single-row design | — |
| Product identity | |||
| Official product category | Tapered roller bearings | — | — |
| Official taxonomy path | /products/rolling-bearings/roller-bearings/tapered-roller-bearings/single-row-tapered-roller-bearings | — | — |
| Structure group ID | BT1_001_101 | — | — |
| Available from SKF | Yes | — | — |
| Remanufacturable | Yes | — | — |
| Product Identity | |||
| Construction | — | Tapered roller bearings 303, main dimensions acc. to DIN 720, separable | — |
| Short Description | — | Tapered roller bearing | — |
| Properties | |||
| Bearing part | Complete bearing | — | — |
| Locating feature, bearing outer ring | Without | — | — |
| Bore type | Cylindrical | — | — |
| Arrangement of contact angle (double-row bearing) | Not applicable | — | — |
| Matched arrangement | No | — | — |
| Coating | Without | — | — |
| Relubrication feature | Without | — | — |
| Unit system | Metric | — | — |
| Candidate for remanufacturing | Yes | — | — |
| Indicative carbon footprint for new product | 107.0 kg CO 2 e | — | — |
| Indicative carbon footprint for remanufactured product | 35.6 kg CO 2 e | — | — |
| Technical Data | |||
| d | — | — | 340 mm |
| T | — | — | 75 mm |
| B | — | — | 68 mm |
| C | — | — | 48 mm |
| Bore Diameter (D) | — | 160 mm | — |
| R(Min.) | — | — | 5 mm |
| Outside Diameter (D) | — | 340 mm | — |
| R1(Min.) | — | — | 4 mm |
| Width (B) | — | 75 mm | — |
| Basic Load Ratings : Cr | — | — | 926 kN |
| Basic Dynamic Load Rating, Radial (Cr) | — | 890,000 N | — |
| Basic Load Ratings : C0R | — | — | 933 kN |
| Basic Static Load Rating, Radial (C0R) | — | 1,140,000 N | — |
| Fatigue Load Limit : Cu | — | — | 104 kN |
| Operating Temperature Min. (Tmin) | — | -30 °C | — |
| Limiting Speeds(Grease Lub.) | — | — | 900 min-1 |
| Limiting Speed (Ng) | — | 2,130 1/min | — |
| Limiting Speeds(Oil Lub.) | — | — | 1300 min-1 |
| Operating Temperature Max. (Tmax) | — | 200 °C | — |
| Load Center Spread : A | — | — | 101.8 mm |
| Reference Speed (Nϑr) | — | 1,500 1/min | — |
| Constant E | — | — | 0.81 |
| Maximum Fillet Radius Of Housing (Rb Max) | — | 4 mm | — |
| Axial Load Factors : Y1 | — | — | 0.74 |
| Minimum Chamfer Dimension Of Outer Ring Back Face (R3, 4 M) | — | 4 mm | — |
| Axial Load Factors : Y0 | — | — | 0.41 |
| Minimum Diameter Of Housing Shoulder (Da Min) | — | 290 mm | — |
| Da(Min.) | — | — | 290 mm |
| Minimum Diameter Of Housing Shoulder (Db Min) | — | 310 mm | — |
| Db(Max.) | — | — | 195 mm |
| Width, Outer Ring (C) | — | 58 mm | — |
| Da(Max.) | — | — | 322 mm |
| Fatigue Load Limit, Radial (Cur) | — | 126,000 N | — |
| Db(Min.) | — | — | 320 mm |
| Limiting Value Of Fa/Fr For The Applicability Of Diff. Values Of Factors X And Y (E) | — | 0.35 | — |
| Sa(Min.) | — | — | 9 mm |
| Maximum Diameter Of Shaft Shoulder (Da Max) | — | 201 mm | — |
| Sb(Min.) | — | — | 27 mm |
| Minimum Diameter Of Shaft Shoulder (Db Min) | — | 178 mm | — |
| Ra(Max.) | — | — | 4 mm |
| Maximum Diameter Of Housing Shoulder (Da Max) | — | 319 mm | — |
| Rb(Max.) | — | — | 3 mm |
| Dynamic Axial Load Factor (Y) | — | 1.74 | — |
| Mass(Refer.) | — | — | 29.1 kg |
| Maximum Fillet Radius (Ra Max) | — | 5 mm | — |
| Minimum Axial Space (Cb Min) | — | 17 mm | — |
| Minimum Chamfer Dimension Of Inner Ring Back Face (R1, 2 M) | — | 5 mm | — |
| Guidance Rib Diameter Of Inner Ring (D1) | — | 237 mm | — |
| Minimum Axial Space (Ca Min) | — | 9 mm | — |
| Width, Inner Ring (B) | — | 68 mm | — |
| Static Axial Load Factor (Y0) | — | 0.96 | — |
| Distance Between The Apexes Of The Pressure Cones (A) | — | 63 mm | — |
| Temperature range | |||
| Operating temperature min.Tmin | — | -30 °C | — |
| Operating temperature min.Tmin | — | -22 °F | — |
| Operating temperature max.Tmax | — | 200 °C | — |
| Operating temperature max.Tmax | — | 392 °F | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.