Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Cross Reference centre · Interchange verification checklist · Understand suffix differences
You entered 30264-XL. This table explores the base group 30264; it does not preserve or approve every requested suffix. Search your complete marking first →
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions differ
“30264” across 2 loaded brands
The base designation is shared, but the loaded boundary dimensions do not agree. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | FAG30264-XL320 × 580 × 104 mm | KOYO30264320 × 580 × 92 mm |
|---|---|---|
| Comparable specifications | ||
| Brand | FAG | KOYO |
| Designation | 30264-XL | 30264 |
| Product family | — | Single-row / Metric series |
| Detailed type | Tapered roller bearings | Tapered roller bearings |
| Series | 30264 | — |
| Bore diameterd | 320 mm | 320 mm |
| Outside diameterD | 580 mm | 580 mm |
| WidthB | 104 mm | 92 mm |
| Basic dynamic load ratingC | 2310 kN | 2190 kN |
| Basic static load ratingC0 | 3000 kN | 2770 kN |
| Fatigue load limitPu | 315 kN | 273 kN |
| Reference speednref | 650 r/min | — |
| Limiting speednG | 1420 r/min | 490 r/min |
| Mass≈m | 107 kg | 108 kg |
| Precision class | PN — Normal (ISO 492:2023) | — |
| Cage | Standard — Sheet steel cage, window cage, roller-guided | — |
| Minimum operating temperatureTmin | -30 °C | — |
| Maximum operating temperatureTmax | 200 °C | — |
| Calculation factors | ||
| Limiting value of Fa/Fr for the applicability of diff. Values of factors X and Ye | 0.43 | — |
| Dynamic axial load factorY | 1.38 | — |
| Static axial load factorY0 | 0.76 | — |
| Capabilities & suitability | ||
| Radial load capacity | Yes | — |
| Axial load capacity in one direction | Yes | — |
| Suitable for grease lubrication | Yes | — |
| Suitable for oil lubrication | Yes | — |
| Unsealed design | Yes | — |
| Largebearing | Yes | — |
| Classification | ||
| Official Category Path | — | Tapered roller bearings - Single-row - Metric series |
| Official Classification 1 | — | Tapered roller bearings / Single-row / Metric series |
| Dimensions | ||
| Minimum chamfer dimension of inner ring back facer1, 2 min | 6 mm | — |
| Minimum chamfer dimension of inner ring back facer1, 2 min | 0.236 in | — |
| Minimum chamfer dimension of outer ring back facer3, 4 min | 5 mm | — |
| Minimum chamfer dimension of outer ring back facer3, 4 min | 0.197 in | — |
| Distance between the apexes of the pressure conesa | 112 mm | — |
| Distance between the apexes of the pressure conesa | 4.409 in | — |
| Guidance rib diameter of inner ringd1 | 432.5 mm | — |
| Guidance rib diameter of inner ringd1 | 17.028 in | — |
| Main Dimensions & Performance Data | ||
| Width, inner ringB | 92 mm | — |
| Width, inner ringB | 3.622 in | — |
| Width, outer ringC | 75 mm | — |
| Width, outer ringC | 2.953 in | — |
| Width, totalT | 104 mm | — |
| Width, totalT | 4.094 in | — |
| Basic dynamic load rating, radialCr | 2,310,000 N | — |
| Basic dynamic load rating, radialCr | 519,334.532 lbf | — |
| Basic static load rating, radialC0r | 3,000,000 N | — |
| Basic static load rating, radialC0r | 674,460.432 lbf | — |
| Fatigue load limit, radialCur | 315,000 N | — |
| Fatigue load limit, radialCur | 70,818.345 lbf | — |
| Thermal speed ratingnϑr | 650 1/min | — |
| Manufacturer Identity | ||
| Schaeffler Product Code | 773095 | — |
| Official Class Key | — | 050-010-010 |
| Base Type | 30264 | — |
| Gpsd Group | F04 | — |
| Product Line Id | 70 | — |
| X Life Marking | XL | — |
| SAP material number | 0866679550000 | — |
| Base product | 2305091001 | — |
| Bearing X designation | 30264-XL | — |
| Mounting Manager ID | 30264-XL | — |
| Grease application ID | 30264-XL | — |
| Mounting dimensions | ||
| Maximum diameter of shaft shoulderda max | 380 mm | — |
| Maximum diameter of shaft shoulderda max | 14.961 in | — |
| Minimum diameter of shaft shoulderdb min | 340 mm | — |
| Minimum diameter of shaft shoulderdb min | 13.386 in | — |
| Minimum diameter of housing shoulderDa min | 501 mm | — |
| Minimum diameter of housing shoulderDa min | 19.724 in | — |
| Maximum diameter of housing shoulderDa max | 556 mm | — |
| Maximum diameter of housing shoulderDa max | 21.89 in | — |
| Minimum diameter of housing shoulderDb min | 536 mm | — |
| Minimum diameter of housing shoulderDb min | 21.102 in | — |
| Minimum axial spaceCa min | 12 mm | — |
| Minimum axial spaceCa min | 0.472 in | — |
| Minimum axial spaceCb min | 29 mm | — |
| Minimum axial spaceCb min | 1.142 in | — |
| Maximum fillet radius of shaftra max | 6 mm | — |
| Maximum fillet radius of shaftra max | 0.236 in | — |
| Maximum fillet radius of housingrb max | 5 mm | — |
| Maximum fillet radius of housingrb max | 0.197 in | — |
| Product characteristics | ||
| Tolerance classPN | Normal (ISO 492:2023) | — |
| Heat treatment | Standard | — |
| Internal design | Standard | — |
| Quality levelXL | X-life | — |
| Number of rows1 | Single-row design | — |
| Product Identity | ||
| Construction | Tapered roller bearings 302, main dimensions acc. to DIN 720, separable | — |
| Short Description | Tapered roller bearing | — |
| Technical Data | ||
| d | — | 580 mm |
| T | — | 104 mm |
| B | — | 92 mm |
| Bore Diameter (D) | 320 mm | — |
| C | — | 75 mm |
| Outside Diameter (D) | 580 mm | — |
| R(Min.) | — | 6 mm |
| Width (B) | 104 mm | — |
| R1(Min.) | — | 5 mm |
| Basic Dynamic Load Rating, Radial (Cr) | 2,310,000 N | — |
| Basic Load Ratings : Cr | — | 2190 kN |
| Basic Static Load Rating, Radial (C0R) | 3,000,000 N | — |
| Basic Load Ratings : C0R | — | 2770 kN |
| Operating Temperature Min. (Tmin) | -30 °C | — |
| Fatigue Load Limit : Cu | — | 273 kN |
| Limiting Speed (Ng) | 1,420 1/min | — |
| Limiting Speeds(Grease Lub.) | — | 490 min-1 |
| Operating Temperature Max. (Tmax) | 200 °C | — |
| Limiting Speeds(Oil Lub.) | — | 660 min-1 |
| Reference Speed (Nϑr) | 650 1/min | — |
| Load Center Spread : A | — | 111.9 mm |
| Maximum Fillet Radius Of Housing (Rb Max) | 5 mm | — |
| Constant E | — | 0.42 |
| Minimum Chamfer Dimension Of Outer Ring Back Face (R3, 4 M) | 5 mm | — |
| Axial Load Factors : Y1 | — | 1.44 |
| Minimum Diameter Of Housing Shoulder (Da Min) | 501 mm | — |
| Axial Load Factors : Y0 | — | 0.79 |
| Minimum Diameter Of Housing Shoulder (Db Min) | 536 mm | — |
| Da(Min.) | — | 505 mm |
| Width, Outer Ring (C) | 75 mm | — |
| Db(Max.) | — | 370 mm |
| Fatigue Load Limit, Radial (Cur) | 315,000 N | — |
| Da(Max.) | — | 558 mm |
| Limiting Value Of Fa/Fr For The Applicability Of Diff. Values Of Factors X And Y (E) | 0.43 | — |
| Db(Min.) | — | 540 mm |
| Maximum Diameter Of Shaft Shoulder (Da Max) | 380 mm | — |
| Sa(Min.) | — | 14 mm |
| Minimum Diameter Of Shaft Shoulder (Db Min) | 340 mm | — |
| Sb(Min.) | — | 28 mm |
| Maximum Diameter Of Housing Shoulder (Da Max) | 556 mm | — |
| Ra(Max.) | — | 5 mm |
| Dynamic Axial Load Factor (Y) | 1.38 | — |
| Rb(Max.) | — | 4 mm |
| Maximum Fillet Radius (Ra Max) | 6 mm | — |
| Mass(Refer.) | — | 108 kg |
| Minimum Axial Space (Cb Min) | 29 mm | — |
| Minimum Chamfer Dimension Of Inner Ring Back Face (R1, 2 M) | 6 mm | — |
| Guidance Rib Diameter Of Inner Ring (D1) | 432.5 mm | — |
| Minimum Axial Space (Ca Min) | 12 mm | — |
| Width, Inner Ring (B) | 92 mm | — |
| Static Axial Load Factor (Y0) | 0.76 | — |
| Distance Between The Apexes Of The Pressure Cones (A) | 112 mm | — |
| Temperature range | ||
| Operating temperature min.Tmin | -30 °C | — |
| Operating temperature min.Tmin | -22 °F | — |
| Operating temperature max.Tmax | 200 °C | — |
| Operating temperature max.Tmax | 392 °F | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.