Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions verified
“30232” across 2 loaded brands
At least two brands share the same bore, outside diameter and width. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | FAG30232-P5160 × 290 × 52 mm | TIMKEN30232160 × 290 × 52 mm |
|---|---|---|
| Comparable specifications | ||
| Brand | FAG | TIMKEN |
| Designation | 30232-P5 | 30232 |
| Product family | — | TS - Tapered Single |
| Detailed type | Tapered roller bearings | Tapered roller bearings |
| Series | 30232 | 30232 |
| Bore diameterd | 160 mm | 160 mm |
| Outside diameterD | 290 mm | 290 mm |
| WidthB | 52 mm | 52 mm |
| Basic dynamic load ratingC | 405 kN | 657 kN |
| Basic static load ratingC0 | 570 kN | 868 kN |
| Fatigue load limitPu | 67 kN | — |
| Reference speednref | 1890 r/min | — |
| Limiting speednG | 2500 r/min | — |
| Mass≈m | 13.8 kg | 13.79 kg |
| Precision class | P5 — Class 5 (ISO 492:2023) | ABMA Class K |
| Sealing | — | Open |
| Cage | Standard — Sheet steel cage, window cage, roller-guided | Steel cage |
| Minimum operating temperatureTmin | -30 °C | — |
| Maximum operating temperatureTmax | 200 °C | — |
| Additional information | ||
| Comparative designation to ISO 10317 and ISO 355 | T4GB160 | — |
| Calculation Factors | ||
| K Factor | — | 1.34 |
| Y1 Factor | — | 1.38 |
| Y2 Factor | — | 0.00 |
| Y0 Factor | — | 0.76 |
| E Factor | — | 0.44 |
| Cg Factor | — | 0.1156 |
| Calculation factors | ||
| Limiting value of Fa/Fr for the applicability of diff. Values of factors X and Ye | 0.37 | — |
| Dynamic axial load factorY | 1.61 | — |
| Static axial load factorY0 | 0.89 | — |
| Capabilities & suitability | ||
| Radial load capacity | Yes | — |
| Axial load capacity in one direction | Yes | — |
| Suitable for grease lubrication | Yes | — |
| Suitable for oil lubrication | Yes | — |
| Unsealed design | Yes | — |
| Dimensions | ||
| Minimum chamfer dimension of inner ring back facer1, 2 min | 4 mm | — |
| Minimum chamfer dimension of inner ring back facer1, 2 min | 0.157 in | — |
| Minimum chamfer dimension of outer ring back facer3, 4 min | 3 mm | — |
| Minimum chamfer dimension of outer ring back facer3, 4 min | 0.118 in | — |
| Distance between the apexes of the pressure conesa | 52 mm | — |
| Distance between the apexes of the pressure conesa | 2.047 in | — |
| Guidance rib diameter of inner ringd1 | 216.5 mm | — |
| Guidance rib diameter of inner ringd1 | 8.524 in | — |
| Main Dimensions & Performance Data | ||
| Width, inner ringB | 48 mm | — |
| Width, inner ringB | 1.89 in | — |
| Width, outer ringC | 40 mm | — |
| Width, outer ringC | 1.575 in | — |
| Width, totalT | 52 mm | — |
| Width, totalT | 2.047 in | — |
| Basic dynamic load rating, radialCr | 405,000 N | — |
| Basic dynamic load rating, radialCr | 91,052.158 lbf | — |
| Basic static load rating, radialC0r | 570,000 N | — |
| Basic static load rating, radialC0r | 128,147.482 lbf | — |
| Fatigue load limit, radialCur | 67,000 N | — |
| Fatigue load limit, radialCur | 15,062.95 lbf | — |
| Thermal speed ratingnϑr | 1,890 1/min | — |
| Manufacturer Identity | ||
| Schaeffler Product Code | 2268722 | — |
| Material Number | — | 000000000190038402 |
| Base Type | 30232 | — |
| World Assembly Part Number | — | X30232M_Y30232M |
| Product Line Id | 70 | — |
| Inner Ring Part Number | — | X30232M |
| Outer Ring Part Number | — | Y30232M |
| Drawing Number | — | B-187887 |
| Upc | — | 0053893785462 |
| Official Source System | — | CORE BP - DS DF |
| Official Last Run | — | 2026-08-23T20:02:47.283 |
| Base product | 2305091001 | — |
| Bearing X designation | 30232-P5 | — |
| Mounting Manager ID | 30232-P5 | — |
| Grease application ID | 30232-P5 | — |
| Mounting dimensions | ||
| Maximum diameter of shaft shoulderda max | 189 mm | — |
| Maximum diameter of shaft shoulderda max | 7.441 in | — |
| Minimum diameter of shaft shoulderdb min | 174 mm | — |
| Minimum diameter of shaft shoulderdb min | 6.85 in | — |
| Minimum diameter of housing shoulderDa min | 252 mm | — |
| Minimum diameter of housing shoulderDa min | 9.921 in | — |
| Maximum diameter of housing shoulderDa max | 276 mm | — |
| Maximum diameter of housing shoulderDa max | 10.866 in | — |
| Minimum diameter of housing shoulderDb min | 269 mm | — |
| Minimum diameter of housing shoulderDb min | 10.591 in | — |
| Minimum axial spaceCa min | 9 mm | — |
| Minimum axial spaceCa min | 0.354 in | — |
| Minimum axial spaceCb min | 12 mm | — |
| Minimum axial spaceCb min | 0.472 in | — |
| Maximum fillet radius of shaftra max | 4 mm | — |
| Maximum fillet radius of shaftra max | 0.157 in | — |
| Maximum fillet radius of housingrb max | 3 mm | — |
| Maximum fillet radius of housingrb max | 0.118 in | — |
| Product characteristics | ||
| Tolerance classP5 | Class 5 (ISO 492:2023) | — |
| Heat treatment | Standard | — |
| Internal design | Standard | — |
| Quality level | Standard | — |
| Number of rows1 | Single-row design | — |
| Product Identity | ||
| Construction | Tapered roller bearings 302, main dimensions acc. to DIN 720, separable | Single Row Tapered Roller Bearing Assembly | Imperial Series | 6.2992 in Bore | 11.4173 in OD | 2.0472 in Width | Open | Cylindrical Bore | Steel Cage | Precision ABMA Class K |
| Short Description | Tapered roller bearing | — |
| Type Description | — | TS - Tapered Single |
| Number Of Rows | — | 1 |
| Tapered Bore | — | N |
| Technical Data | ||
| Bore Diameter (D) | 160 mm | — |
| Outside Diameter (D) | 290 mm | — |
| Width (B) | 52 mm | — |
| Basic Dynamic Load Rating, Radial (Cr) | 405,000 N | — |
| Overall Width | — | 59.400 mm |
| Basic Static Load Rating, Radial (C0R) | 570,000 N | — |
| Radial Rating | — | 170,000 N |
| Operating Temperature Min. (Tmin) | -30 °C | — |
| Axial Rating | — | 127,000 N |
| Limiting Speed (Ng) | 2,500 1/min | — |
| Dynamic Rating C1 | — | 657,000 N |
| Operating Temperature Max. (Tmax) | 200 °C | — |
| Dynamic Rating C90 | — | 170,000 N |
| Reference Speed (Nϑr) | 1,890 1/min | — |
| Dynamic Axial Rating Ca90 | — | 127,000 N |
| Maximum Fillet Radius Of Housing (Rb Max) | 3 mm | — |
| Dynamic Axial Rating Ca1 | — | 489,000 N |
| Minimum Chamfer Dimension Of Outer Ring Back Face (R3, 4 M) | 3 mm | — |
| Static Radial Rating C0 | — | 868,000 N |
| Minimum Diameter Of Housing Shoulder (Da Min) | 252 mm | — |
| Extended Dynamic Rating Ce | — | 0 N |
| Minimum Diameter Of Housing Shoulder (Db Min) | 269 mm | — |
| Static Axial Rating C0A | — | 1,100,000 N |
| Width, Outer Ring (C) | 40 mm | — |
| Fatigue Load Limit, Radial (Cur) | 67,000 N | — |
| Limiting Value Of Fa/Fr For The Applicability Of Diff. Values Of Factors X And Y (E) | 0.37 | — |
| Maximum Diameter Of Shaft Shoulder (Da Max) | 189 mm | — |
| Minimum Diameter Of Shaft Shoulder (Db Min) | 174 mm | — |
| Maximum Diameter Of Housing Shoulder (Da Max) | 276 mm | — |
| Dynamic Axial Load Factor (Y) | 1.61 | — |
| Maximum Fillet Radius (Ra Max) | 4 mm | — |
| Minimum Axial Space (Cb Min) | 12 mm | — |
| Minimum Chamfer Dimension Of Inner Ring Back Face (R1, 2 M) | 4 mm | — |
| Guidance Rib Diameter Of Inner Ring (D1) | 216.5 mm | — |
| Minimum Axial Space (Ca Min) | 9 mm | — |
| Width, Inner Ring (B) | 48 mm | — |
| Static Axial Load Factor (Y0) | 0.89 | — |
| Distance Between The Apexes Of The Pressure Cones (A) | 52 mm | — |
| Temperature range | ||
| Operating temperature min.Tmin | -30 °C | — |
| Operating temperature min.Tmin | -22 °F | — |
| Operating temperature max.Tmax | 200 °C | — |
| Operating temperature max.Tmax | 392 °F | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.