Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Cross Reference centre · Interchange verification checklist · Understand suffix differences
You entered 30230-XL-P5. This table explores the base group 30230; it does not preserve or approve every requested suffix. Search your complete marking first →
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions verified
“30230” across 2 loaded brands
At least two brands share the same bore, outside diameter and width. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | FAG30230-A>A150 × 270 × 49 mm | TIMKEN30230150 × 270 × 49 mm |
|---|---|---|
| Comparable specifications | ||
| Brand | FAG | TIMKEN |
| Designation | 30230-A>A | 30230 |
| Product family | — | TS - Tapered Single |
| Detailed type | Tapered roller bearings | Tapered roller bearings |
| Series | 30230 | 30230 |
| Bore diameterd | 150 mm | 150 mm |
| Outside diameterD | 270 mm | 270 mm |
| WidthB | 49 mm | 49 mm |
| Basic dynamic load ratingC | 465 kN | 565 kN |
| Basic static load ratingC0 | 630 kN | 735 kN |
| Fatigue load limitPu | 75 kN | — |
| Reference speednref | 1880 r/min | — |
| Limiting speednG | 2650 r/min | — |
| Mass≈m | 8.5 kg | 11.02 kg |
| Precision class | PN — Normal (ISO 492:2023) | ABMA Class K |
| Sealing | — | Open |
| Cage | Standard — Sheet steel cage, window cage, roller-guided | Steel cage |
| Minimum operating temperatureTmin | -30 °C | — |
| Maximum operating temperatureTmax | 200 °C | — |
| Additional information | ||
| Comparative designation to ISO 10317 and ISO 355 | T4GB150 | — |
| Calculation Factors | ||
| K Factor | — | 1.34 |
| Y1 Factor | — | 1.38 |
| Y2 Factor | — | 0.00 |
| Y0 Factor | — | 0.76 |
| E Factor | — | 0.44 |
| Cg Factor | — | 0.1254 |
| Calculation factors | ||
| Limiting value of Fa/Fr for the applicability of diff. Values of factors X and Ye | 0.43 | — |
| Dynamic axial load factorY | 1.38 | — |
| Static axial load factorY0 | 0.76 | — |
| Capabilities & suitability | ||
| Radial load capacity | Yes | — |
| Axial load capacity in one direction | Yes | — |
| Suitable for grease lubrication | Yes | — |
| Suitable for oil lubrication | Yes | — |
| Unsealed design | Yes | — |
| Dimensions | ||
| Minimum chamfer dimension of inner ring back facer1, 2 min | 4 mm | — |
| Minimum chamfer dimension of inner ring back facer1, 2 min | 0.157 in | — |
| Minimum chamfer dimension of outer ring back facer3, 4 min | 3 mm | — |
| Minimum chamfer dimension of outer ring back facer3, 4 min | 0.118 in | — |
| Distance between the apexes of the pressure conesa | 52 mm | — |
| Distance between the apexes of the pressure conesa | 2.047 in | — |
| Guidance rib diameter of inner ringd1 | 201 mm | — |
| Guidance rib diameter of inner ringd1 | 7.913 in | — |
| Main Dimensions & Performance Data | ||
| Width, inner ringB | 45 mm | — |
| Width, inner ringB | 1.772 in | — |
| Width, outer ringC | 38 mm | — |
| Width, outer ringC | 1.496 in | — |
| Width, totalT | 49 mm | — |
| Width, totalT | 1.929 in | — |
| Basic dynamic load rating, radialCr | 465,000 N | — |
| Basic dynamic load rating, radialCr | 104,541.367 lbf | — |
| Basic static load rating, radialC0r | 630,000 N | — |
| Basic static load rating, radialC0r | 141,636.691 lbf | — |
| Fatigue load limit, radialCur | 75,000 N | — |
| Fatigue load limit, radialCur | 16,861.511 lbf | — |
| Thermal speed ratingnϑr | 1,880 1/min | — |
| Manufacturer Identity | ||
| Schaeffler Product Code | 384067 | — |
| Material Number | — | 000000000100037712 |
| Base Type | 30230 | — |
| World Assembly Part Number | — | X30230M_Y30230M |
| Gpsd Group | F04 | — |
| Inner Ring Part Number | — | X30230M |
| Product Line Id | 64 | — |
| Outer Ring Part Number | — | Y30230M |
| Drawing Number | — | C-102426 |
| Upc | — | 0053893461380 |
| Official Source System | — | CORE BP - DS DF |
| Official Last Run | — | 2026-08-23T20:02:47.67 |
| SAP material number | 0933281760000 | — |
| Base product | 2305091001 | — |
| Bearing X designation | 30230-A | — |
| Mounting Manager ID | 30230-A | — |
| Grease application ID | 30230-A | — |
| Mounting dimensions | ||
| Maximum diameter of shaft shoulderda max | 175 mm | — |
| Maximum diameter of shaft shoulderda max | 6.89 in | — |
| Minimum diameter of shaft shoulderdb min | 164 mm | — |
| Minimum diameter of shaft shoulderdb min | 6.457 in | — |
| Minimum diameter of housing shoulderDa min | 234 mm | — |
| Minimum diameter of housing shoulderDa min | 9.213 in | — |
| Maximum diameter of housing shoulderDa max | 256 mm | — |
| Maximum diameter of housing shoulderDa max | 10.079 in | — |
| Minimum diameter of housing shoulderDb min | 250 mm | — |
| Minimum diameter of housing shoulderDb min | 9.843 in | — |
| Minimum axial spaceCa min | 9 mm | — |
| Minimum axial spaceCa min | 0.354 in | — |
| Minimum axial spaceCb min | 11 mm | — |
| Minimum axial spaceCb min | 0.433 in | — |
| Maximum fillet radius of shaftra max | 4 mm | — |
| Maximum fillet radius of shaftra max | 0.157 in | — |
| Maximum fillet radius of housingrb max | 3 mm | — |
| Maximum fillet radius of housingrb max | 0.118 in | — |
| Product characteristics | ||
| Tolerance classPN | Normal (ISO 492:2023) | — |
| Heat treatment | Standard | — |
| Internal design | Standard | — |
| Quality level | Standard | — |
| Version code>A | Not marked on bearing | — |
| Number of rows1 | Single-row design | — |
| Product Identity | ||
| Construction | Tapered roller bearings 302, main dimensions acc. to DIN 720, separable | Single Row Tapered Roller Bearing Assembly | Imperial Series | 5.9055 in Bore | 10.6299 in OD | 1.9291 in Width | Open | Cylindrical Bore | Steel Cage | Precision ABMA Class K |
| Short Description | Tapered roller bearing | — |
| Type Description | — | TS - Tapered Single |
| Number Of Rows | — | 1 |
| Tapered Bore | — | N |
| Technical Data | ||
| Bore Diameter (D) | 150 mm | — |
| Outside Diameter (D) | 270 mm | — |
| Width (B) | 49 mm | — |
| Overall Width | — | 57.500 mm |
| Basic Dynamic Load Rating, Radial (Cr) | 465,000 N | — |
| Radial Rating | — | 146,000 N |
| Basic Static Load Rating, Radial (C0R) | 630,000 N | — |
| Axial Rating | — | 109,000 N |
| Operating Temperature Min. (Tmin) | -30 °C | — |
| Dynamic Rating C1 | — | 565,000 N |
| Limiting Speed (Ng) | 2,650 1/min | — |
| Dynamic Rating C90 | — | 146,000 N |
| Operating Temperature Max. (Tmax) | 200 °C | — |
| Dynamic Axial Rating Ca90 | — | 109,000 N |
| Reference Speed (Nϑr) | 1,880 1/min | — |
| Dynamic Axial Rating Ca1 | — | 420,000 N |
| Maximum Fillet Radius Of Housing (Rb Max) | 3 mm | — |
| Static Radial Rating C0 | — | 735,000 N |
| Minimum Chamfer Dimension Of Outer Ring Back Face (R3, 4 M) | 3 mm | — |
| Extended Dynamic Rating Ce | — | 0 N |
| Minimum Diameter Of Housing Shoulder (Da Min) | 234 mm | — |
| Static Axial Rating C0A | — | 931,000 N |
| Minimum Diameter Of Housing Shoulder (Db Min) | 250 mm | — |
| Width, Outer Ring (C) | 38 mm | — |
| Fatigue Load Limit, Radial (Cur) | 75,000 N | — |
| Limiting Value Of Fa/Fr For The Applicability Of Diff. Values Of Factors X And Y (E) | 0.43 | — |
| Maximum Diameter Of Shaft Shoulder (Da Max) | 175 mm | — |
| Minimum Diameter Of Shaft Shoulder (Db Min) | 164 mm | — |
| Maximum Diameter Of Housing Shoulder (Da Max) | 256 mm | — |
| Dynamic Axial Load Factor (Y) | 1.38 | — |
| Maximum Fillet Radius (Ra Max) | 4 mm | — |
| Minimum Axial Space (Cb Min) | 11 mm | — |
| Minimum Chamfer Dimension Of Inner Ring Back Face (R1, 2 M) | 4 mm | — |
| Guidance Rib Diameter Of Inner Ring (D1) | 201 mm | — |
| Minimum Axial Space (Ca Min) | 9 mm | — |
| Width, Inner Ring (B) | 45 mm | — |
| Static Axial Load Factor (Y0) | 0.76 | — |
| Distance Between The Apexes Of The Pressure Cones (A) | 52 mm | — |
| Temperature range | ||
| Operating temperature min.Tmin | -30 °C | — |
| Operating temperature min.Tmin | -22 °F | — |
| Operating temperature max.Tmax | 200 °C | — |
| Operating temperature max.Tmax | 392 °F | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.