Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Cross Reference centre · Interchange verification checklist · Understand suffix differences
You entered 30202-A. This table explores the base group 30202; it does not preserve or approve every requested suffix. Search your complete marking first →
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions differ
“30202” across 3 loaded brands
The base designation is shared, but the loaded boundary dimensions do not agree. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | SKF3020215 × 35 × mm | FAG30202-A15 × 35 × 11.75 mm | KOYO30202R15 × 35 × 11 mm |
|---|---|---|---|
| Comparable specifications | |||
| Brand | SKF | FAG | KOYO |
| Designation | 30202 | 30202-A | 30202R |
| Product family | Tapered roller bearings | — | Single-row / Metric series |
| Detailed type | Single row tapered roller bearing | Tapered roller bearings | Tapered roller bearings |
| Series | — | 30202 | — |
| Bore diameterd | 15 mm | 15 mm | 15 mm |
| Outside diameterD | 35 mm | 35 mm | 35 mm |
| WidthB | — | 11.75 mm | 11 mm |
| Basic dynamic load ratingC | 18.5 kN | 14.7 kN | 19.8 kN |
| Basic static load ratingC0 | 14.6 kN | 14.1 kN | 14.5 kN |
| Fatigue load limitPu | 1.43 kN | 1.35 kN | 2 kN |
| Reference speednref | 17000 r/min | 13500 r/min | — |
| Limiting speednG | 20000 r/min | 23400 r/min | 12000 r/min |
| Mass≈m | 0.055 kg | 0.055 kg | 0.054 kg |
| Precision class | — | PN — Normal (ISO 492:2023) | — |
| Sealing | Without | — | — |
| Cage | Sheet metal | Standard — Sheet steel cage, window cage, roller-guided | — |
| Lubricant | None | — | — |
| Minimum operating temperatureTmin | — | -30 °C | — |
| Maximum operating temperatureTmax | — | 120 °C | — |
| Calculation factors | |||
| Limiting value of Fa/Fr for the applicability of diff. Values of factors X and Ye | — | 0.35 | — |
| Dynamic axial load factorY | — | 1.73 | — |
| Static axial load factorY0 | — | 0.95 | — |
| Capabilities & suitability | |||
| Radial load capacity | — | Yes | — |
| Axial load capacity in one direction | — | Yes | — |
| Suitable for grease lubrication | — | Yes | — |
| Suitable for oil lubrication | — | Yes | — |
| Unsealed design | — | Yes | — |
| Classification | |||
| Official Category Path | — | — | Tapered roller bearings - Single-row - Metric series |
| Official Classification 1 | — | — | Tapered roller bearings / Single-row / Metric series |
| Dimensions | |||
| Width, total | 11.75 mm | — | — |
| Width, inner ring | 11.0 mm | — | — |
| Width, outer ring | 9.25 mm | — | — |
| Contact angle | 13.0 ° | — | — |
| Minimum chamfer dimension of inner ring back facer1, 2 min | — | 0.6 mm | — |
| Minimum chamfer dimension of inner ring back facer1, 2 min | — | 0.024 in | — |
| Minimum chamfer dimension of outer ring back facer3, 4 min | — | 0.6 mm | — |
| Minimum chamfer dimension of outer ring back facer3, 4 min | — | 0.024 in | — |
| Distance between the apexes of the pressure conesa | — | 8 mm | — |
| Distance between the apexes of the pressure conesa | — | 0.315 in | — |
| Guidance rib diameter of inner ringd1 | — | 26.4 mm | — |
| Guidance rib diameter of inner ringd1 | — | 1.039 in | — |
| Engineering — Abutment dimensions | |||
| Diameter of shaft abutmentd a | max. 20 mm | — | — |
| Diameter of shaft abutmentd b | min. 20.5 mm | — | — |
| Diameter of housing abutmentD a | max. 30.5 mm | — | — |
| Diameter of housing abutmentD b | min. 32 mm | — | — |
| Minimum width of space required in housing on large side faceC a | min. 2 mm | — | — |
| Minimum width of space required in housing on small side faceC b | min. 2.5 mm | — | — |
| Radius of shaft filletr a | max. 0.6 mm | — | — |
| Radius of housing filletr b | max. 0.6 mm | — | — |
| Engineering — Calculation data | |||
| SKF performance class | SKF Explorer | — | — |
| Limiting valuee | 0.35 | — | — |
| Calculation factorY | 1.7 | — | — |
| Calculation factorY 0 | 0.9 | — | — |
| Engineering — Dimensions | |||
| Bearing width, totalT | 11.75 mm | — | — |
| Shoulder diameter of inner ringd 1 | ≈ 25.6 mm | — | — |
| Width of inner ringB | 11 mm | — | — |
| Width of outer ringC | 9.25 mm | — | — |
| Chamfer dimension of inner ringr 1,2 | min. 0.6 mm | — | — |
| Chamfer dimension of outer ringr 3,4 | min. 0.6 mm | — | — |
| Distance side face to pressure pointa | 8.35 mm | — | — |
| Engineering — Engineering specifications | |||
| Dimension series | 2CC | — | — |
| Logistics | |||
| Product net weight | 0.055 kg | — | — |
| eClass code | 23-05-09-10 | — | — |
| UNSPSC code | 31171516 | — | — |
| Main Dimensions & Performance Data | |||
| Width, inner ringB | — | 11 mm | — |
| Width, inner ringB | — | 0.433 in | — |
| Width, outer ringC | — | 10 mm | — |
| Width, outer ringC | — | 0.394 in | — |
| Width, totalT | — | 11.75 mm | — |
| Width, totalT | — | 0.463 in | — |
| Basic dynamic load rating, radialCr | — | 14,700 N | — |
| Basic dynamic load rating, radialCr | — | 3,304.856 lbf | — |
| Basic static load rating, radialC0r | — | 14,100 N | — |
| Basic static load rating, radialC0r | — | 3,169.964 lbf | — |
| Fatigue load limit, radialCur | — | 1,350 N | — |
| Fatigue load limit, radialCur | — | 303.507 lbf | — |
| Thermal speed ratingnϑr | — | 13,500 1/min | — |
| Manufacturer Identity | |||
| Schaeffler Product Code | — | 383362 | — |
| Official Class Key | — | — | 050-010-010 |
| Base Type | — | 30202 | — |
| Old Designation | — | ["30202A"] | — |
| Gpsd Group | — | F05 | — |
| Product Line Id | — | 36 | — |
| X Life Marking | — | n.r. | — |
| SAP material number | — | 0167104010000 | — |
| Base product | — | 2305091001 | — |
| Bearing X designation | — | 30202-A | — |
| Mounting Manager ID | — | 30202-A | — |
| Grease application ID | — | 30202-A | — |
| Mounting dimensions | |||
| Maximum diameter of shaft shoulderda max | — | 20 mm | — |
| Maximum diameter of shaft shoulderda max | — | 0.787 in | — |
| Minimum diameter of shaft shoulderdb min | — | 19 mm | — |
| Minimum diameter of shaft shoulderdb min | — | 0.748 in | — |
| Minimum diameter of housing shoulderDa min | — | 29 mm | — |
| Minimum diameter of housing shoulderDa min | — | 1.142 in | — |
| Maximum diameter of housing shoulderDa max | — | 29 mm | — |
| Maximum diameter of housing shoulderDa max | — | 1.142 in | — |
| Minimum diameter of housing shoulderDb min | — | 32 mm | — |
| Minimum diameter of housing shoulderDb min | — | 1.26 in | — |
| Minimum axial spaceCa min | — | 2 mm | — |
| Minimum axial spaceCa min | — | 0.079 in | — |
| Minimum axial spaceCb min | — | 1.5 mm | — |
| Minimum axial spaceCb min | — | 0.059 in | — |
| Maximum fillet radius of shaftra max | — | 0.6 mm | — |
| Maximum fillet radius of shaftra max | — | 0.024 in | — |
| Maximum fillet radius of housingrb max | — | 0.6 mm | — |
| Maximum fillet radius of housingrb max | — | 0.024 in | — |
| Product characteristics | |||
| Tolerance classPN | — | Normal (ISO 492:2023) | — |
| Heat treatment | — | Standard | — |
| Internal design | — | Standard | — |
| Quality level | — | Standard | — |
| Number of rows1 | — | Single-row design | — |
| Product identity | |||
| Official product category | Tapered roller bearings | — | — |
| Official taxonomy path | /products/rolling-bearings/roller-bearings/tapered-roller-bearings/single-row-tapered-roller-bearings | — | — |
| Structure group ID | BT1_001_101 | — | — |
| Available from SKF | Yes | — | — |
| Remanufacturable | No | — | — |
| Product Identity | |||
| Construction | — | Tapered roller bearings 302, main dimensions acc. to DIN 720, separable | — |
| Short Description | — | Tapered roller bearing | — |
| Properties | |||
| Bearing part | Complete bearing | — | — |
| Number of rows | 1 | — | — |
| Locating feature, bearing outer ring | Without | — | — |
| Bore type | Cylindrical | — | — |
| Arrangement of contact angle (double-row bearing) | Not applicable | — | — |
| Matched arrangement | No | — | — |
| Coating | Without | — | — |
| Relubrication feature | Without | — | — |
| Unit system | Metric | — | — |
| Indicative carbon footprint for new product | 0.2 kg CO 2 e | — | — |
| Technical Data | |||
| d | — | — | 35 mm |
| T | — | — | 11.75 mm |
| B | — | — | 11 mm |
| C | — | — | 10 mm |
| Bore Diameter (D) | — | 15 mm | — |
| R(Min.) | — | — | 0.6 mm |
| Outside Diameter (D) | — | 35 mm | — |
| R1(Min.) | — | — | 0.6 mm |
| Width (B) | — | 11.75 mm | — |
| Basic Load Ratings : Cr | — | — | 19.8 kN |
| Basic Dynamic Load Rating, Radial (Cr) | — | 14,700 N | — |
| Basic Load Ratings : C0R | — | — | 14.5 kN |
| Basic Static Load Rating, Radial (C0R) | — | 14,100 N | — |
| Fatigue Load Limit : Cu | — | — | 2.00 kN |
| Operating Temperature Min. (Tmin) | — | -30 °C | — |
| Limiting Speeds(Grease Lub.) | — | — | 12000 min-1 |
| Limiting Speed (Ng) | — | 23,400 1/min | — |
| Limiting Speeds(Oil Lub.) | — | — | 16000 min-1 |
| Operating Temperature Max. (Tmax) | — | 120 °C | — |
| Load Center Spread : A | — | — | 8.3 mm |
| Reference Speed (Nϑr) | — | 13,500 1/min | — |
| Constant E | — | — | 0.32 |
| Maximum Fillet Radius Of Housing (Rb Max) | — | 0.6 mm | — |
| Axial Load Factors : Y1 | — | — | 1.88 |
| Minimum Chamfer Dimension Of Outer Ring Back Face (R3, 4 M) | — | 0.6 mm | — |
| Axial Load Factors : Y0 | — | — | 1.04 |
| Minimum Diameter Of Housing Shoulder (Da Min) | — | 29 mm | — |
| Da(Min.) | — | — | 29 mm |
| Minimum Diameter Of Housing Shoulder (Db Min) | — | 32 mm | — |
| Db(Max.) | — | — | 20 mm |
| Width, Outer Ring (C) | — | 10 mm | — |
| Da(Max.) | — | — | 30.5 mm |
| Fatigue Load Limit, Radial (Cur) | — | 1,350 N | — |
| Db(Min.) | — | — | 33 mm |
| Limiting Value Of Fa/Fr For The Applicability Of Diff. Values Of Factors X And Y (E) | — | 0.35 | — |
| Sa(Min.) | — | — | 2 mm |
| Maximum Diameter Of Shaft Shoulder (Da Max) | — | 20 mm | — |
| Sb(Min.) | — | — | 1.7 mm |
| Minimum Diameter Of Shaft Shoulder (Db Min) | — | 19 mm | — |
| Ra(Max.) | — | — | 0.6 mm |
| Maximum Diameter Of Housing Shoulder (Da Max) | — | 29 mm | — |
| Rb(Max.) | — | — | 0.6 mm |
| Dynamic Axial Load Factor (Y) | — | 1.73 | — |
| Mass(Refer.) | — | — | 0.054 kg |
| Maximum Fillet Radius (Ra Max) | — | 0.6 mm | — |
| Minimum Axial Space (Cb Min) | — | 1.5 mm | — |
| Minimum Chamfer Dimension Of Inner Ring Back Face (R1, 2 M) | — | 0.6 mm | — |
| Guidance Rib Diameter Of Inner Ring (D1) | — | 26.4 mm | — |
| Minimum Axial Space (Ca Min) | — | 2 mm | — |
| Width, Inner Ring (B) | — | 11 mm | — |
| Static Axial Load Factor (Y0) | — | 0.95 | — |
| Distance Between The Apexes Of The Pressure Cones (A) | — | 8 mm | — |
| Temperature range | |||
| Operating temperature min.Tmin | — | -30 °C | — |
| Operating temperature min.Tmin | — | -22 °F | — |
| Operating temperature max.Tmax | — | 120 °C | — |
| Operating temperature max.Tmax | — | 248 °F | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.