Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Cross Reference centre · Interchange verification checklist · Understand suffix differences
You entered 3008-B-TVH. This table explores the base group 3008; it does not preserve or approve every requested suffix. Search your complete marking first →
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions verified
“3008” across 2 loaded brands
At least two brands share the same bore, outside diameter and width. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | FAG3008-B-TVH40 × 68 × 21 mm | INA3008-2Z40 × 68 × 21 mm |
|---|---|---|
| Comparable specifications | ||
| Brand | FAG | INA |
| Designation | 3008-B-TVH | 3008-2Z |
| Detailed type | Angular contact ball bearings | Angular contact ball bearings |
| Series | 3008 | 3008 |
| Bore diameterd | 40 mm | 40 mm |
| Outside diameterD | 68 mm | 68 mm |
| WidthB | 21 mm | 21 mm |
| Basic dynamic load ratingC | 25 kN | 25 kN |
| Basic static load ratingC0 | 21.3 kN | 21.3 kN |
| Fatigue load limitPu | 1.11 kN | 1.11 kN |
| Reference speednref | 8000 r/min | 8000 r/min |
| Limiting speednG | 10600 r/min | 8000 r/min |
| Mass≈m | 0.26 kg | 0.25 kg |
| Precision class | PN — Normal (ISO 492:2023) | — |
| Sealing | Without — Not sealed | — |
| Cage | TVH — Solid cage made of glass-fiber reinforced polyamide PA66 | — |
| Lubricant | Without — Bearing not greased | — |
| Minimum operating temperatureTmin | -30 °C | -20 °C |
| Maximum operating temperatureTmax | 120 °C | 120 °C |
| Capabilities & suitability | ||
| Radial load capacity | Yes | — |
| Axial load capacity in one direction | Yes | — |
| Axial load capacity in both directions | Yes | — |
| Suitable for grease lubrication | Yes | — |
| Suitable for oil lubrication | Yes | — |
| Unsealed design | Yes | — |
| Dimensions | ||
| Minimum chamfer dimensionrmin | 1 mm | — |
| Minimum chamfer dimensionrmin | 0.039 in | — |
| Shoulder diameter outer ringD1 | 59.04 mm | — |
| Shoulder diameter outer ringD1 | 2.324 in | — |
| Caliber diameter outer ringD2 | 61.22 mm | — |
| Caliber diameter outer ringD2 | 2.41 in | — |
| Shoulder diameter inner ringd1 | 49.2 mm | — |
| Shoulder diameter inner ringd1 | 1.937 in | — |
| Caliber diamter inner ringd2 | 46.85 mm | — |
| Caliber diamter inner ringd2 | 1.844 in | — |
| Distance between the apexes of the pressure conesa | 33.4 mm | — |
| Distance between the apexes of the pressure conesa | 1.315 in | — |
| Contact angleα | 25 ° | — |
| Main Dimensions & Performance Data | ||
| Basic dynamic load rating, radialCr | 25,000 N | — |
| Basic dynamic load rating, radialCr | 5,620.504 lbf | — |
| Basic static load rating, radialC0r | 21,300 N | — |
| Basic static load rating, radialC0r | 4,788.669 lbf | — |
| Fatigue load limit, radialCur | 1,110 N | — |
| Fatigue load limit, radialCur | 249.55 lbf | — |
| Manufacturer Identity | ||
| Schaeffler Product Code | 360433 | 360407 |
| Base Type | 3008 | 3008 |
| Gpsd Group | S03 | S03 |
| Old Designation | — | ["3008 2Z"] |
| Product Line Id | 14 | 14 |
| X Life Marking | n.r. | n.r. |
| SAP material number | 0726250900000 | — |
| Base product | 2305080302 | — |
| Bearing X designation | 3008-B-TVH | — |
| Mounting Manager ID | 3008-B-TVH | — |
| Grease application ID | 3008-B-TVH | — |
| Mounting dimensions | ||
| Minimum diameter shaft shoulderda min | 44.6 mm | — |
| Minimum diameter shaft shoulderda min | 1.756 in | — |
| Maximum diameter of housing shoulderDa max | 63.4 mm | — |
| Maximum diameter of housing shoulderDa max | 2.496 in | — |
| Maximum fillet radiusra max | 1 mm | — |
| Maximum fillet radiusra max | 0.039 in | — |
| Product characteristics | ||
| Design variantB | Bearing without filling slot | — |
| Type of SealWithout | Not sealed | — |
| Tolerance classPN | Normal (ISO 492:2023) | — |
| Dimensional / heat stabilizationSN | Rings dimensional stabilized up to 120° | — |
| Axial internal clearanceCN | Group N (CN) | — |
| Product Identity | ||
| Construction | Angular contact ball bearing 30..-B-TVH, double row, plastic cage | Angular contact ball bearing 30..-B-2RZ-TVH, double row, shields, plastic cage |
| Short Description | Angular contact ball bearing | Angular contact ball bearing |
| Technical Data | ||
| Bore Diameter (D) | 40 mm | 40 mm |
| Outside Diameter (D) | 68 mm | 68 mm |
| Width (B) | 21 mm | 21 mm |
| Basic Dynamic Load Rating, Radial (Cr) | 25,000 N | 25,000 N |
| Basic Static Load Rating, Radial (C0R) | 21,300 N | 21,300 N |
| Operating Temperature Min. (Tmin) | -30 °C | -20 °C |
| Limiting Speed (Ng) | 10,600 1/min | 8,000 1/min |
| Operating Temperature Max. (Tmax) | 120 °C | 120 °C |
| Reference Speed (Nϑr) | 8,000 1/min | 8,000 1/min |
| Caliber Diameter Outer Ring (D2) | 61.22 mm | 61.2 mm |
| Fatigue Load Limit, Radial (Cur) | 1,110 N | 1,110 N |
| Minimum Diameter Shaft Shoulder (Da Min) | 44.6 mm | 44.6 mm |
| Shoulder Diameter Inner Ring (D1) | 49.2 mm | 49.2 mm |
| Maximum Diameter Of Housing Shoulder (Da Max) | 63.4 mm | 63.4 mm |
| Minimum Chamfer Dimension (Rmin) | 1 mm | 1 mm |
| Caliber Diameter Inner Ring (D1) | 46.85 mm | 46.85 mm |
| Maximum Fillet Radius (Ra Max) | 1 mm | 1 mm |
| Shoulder Diameter Outer Ring (D1) | 59.04 mm | 59.04 mm |
| Contact Angle (Α) | 25 ° | 25 ° |
| Distance Between The Apexes Of The Pressure Cones (A) | 33.4 mm | 33.4 mm |
| Temperature range | ||
| Operating temperature min.Tmin | -30 °C | — |
| Operating temperature min.Tmin | -22 °F | — |
| Operating temperature max.Tmax | 120 °C | — |
| Operating temperature max.Tmax | 248 °F | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.