Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions differ
“29496” across 3 loaded brands
The base designation is shared, but the loaded boundary dimensions do not agree. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | SKF29496 EM480 × 850 × mm | FAG29496-E1-XL-MB480 × 850 × 224 mm | KOYO29496R480 × 850 × 81 mm |
|---|---|---|---|
| Comparable specifications | |||
| Brand | SKF | FAG | KOYO |
| Designation | 29496 EM | 29496-E1-XL-MB | 29496R |
| Product family | Spherical roller thrust bearings | — | — |
| Detailed type | Spherical roller thrust bearing with machined metal cage | Axial spherical roller bearings | Axial spherical roller bearings |
| Series | — | 29496 | — |
| Bore diameterd | 480 mm | 480 mm | 480 mm |
| Outside diameterD | 850 mm | 850 mm | 850 mm |
| WidthB | — | 224 mm | 81 mm |
| HeightH | 224 mm | — | — |
| Basic dynamic load ratingC | 9550 kN | — | — |
| Basic static load ratingC0 | 39000 kN | — | — |
| Fatigue load limitPu | 2800 kN | — | 2100 kN |
| Reference speednref | 340 r/min | 335 r/min | — |
| Limiting speednG | 670 r/min | 710 r/min | 270 r/min |
| Mass≈m | 550 kg | 529 kg | 548 kg |
| Cage | Machined brass | MB — Solid brass cage | — |
| Minimum operating temperatureTmin | — | -30 °C | — |
| Maximum operating temperatureTmax | — | 200 °C | — |
| Capabilities & suitability | |||
| Radial load capacity | — | Yes | — |
| Axial load capacity in one direction | — | Yes | — |
| Suitable for grease lubrication | — | Yes | — |
| Suitable for oil lubrication | — | Yes | — |
| Unsealed design | — | Yes | — |
| Largebearing | — | Yes | — |
| Staticangularerrorandmisalignment | — | Yes | — |
| Dynamicangularerrorandmisalignment | — | Yes | — |
| Classification | |||
| Official Category Path | — | — | Spherical thrust roller bearings |
| Official Classification 1 | — | — | Spherical thrust roller bearings |
| Dimensions | |||
| Bore diameter housing washerD1 | — | 625 mm | — |
| Bore diameter housing washerD1 | — | 24.606 in | — |
| Rip diameter shaft washerd1 | — | 780 mm | — |
| Rip diameter shaft washerd1 | — | 30.709 in | — |
| Minimum chamfer dimensionrmin | — | 9.5 mm | — |
| Minimum chamfer dimensionrmin | — | 0.374 in | — |
| Height of the housing washerT1 | — | 108 mm | — |
| Height of the housing washerT1 | — | 4.252 in | — |
| Height of shaft washerT2 | — | 88 mm | — |
| Height of shaft washerT2 | — | 3.465 in | — |
| Height of the shaft washerT3 | — | 147 mm | — |
| Height of the shaft washerT3 | — | 5.787 in | — |
| Height of shaft washer, inc. lip ringT4 | — | 216 mm | — |
| Height of shaft washer, inc. lip ringT4 | — | 8.504 in | — |
| Distance of the center pointA | — | 280 mm | — |
| Distance of the center pointA | — | 11.024 in | — |
| Engineering — Abutment dimensions | |||
| Diameter of shaft abutmentd a | min. 660 mm | — | — |
| Diameter of housing abutmentD a | max. 735 mm | — | — |
| Fillet radiusr a | max. 8 mm | — | — |
| Engineering — Calculation data | |||
| Minimum axial load factorA | 140 | — | — |
| Engineering — Dimensions | |||
| Outside diameter of shaft washer end side faced 1 | ≈ 770 mm | — | — |
| Shoulder diameter outer ringD 1 | ≈ 625 mm | — | — |
| Width shaft washer or length of shaft washer bore diameter that fits on shaft (bearings with a machined cage)B | 88 mm | — | — |
| Height shaft washer + cageB 1 | 216 mm | — | — |
| Height housing washerC | 108 mm | — | — |
| Distance from shaft washer end side face to pressure points | 280 mm | — | — |
| Chamfer dimension shaft washerr 1,2 | min. 9.5 mm | — | — |
| Logistics | |||
| Product net weight | 550.0 kg | — | — |
| eClass code | 23-05-09-11 | — | — |
| UNSPSC code | 31171507 | — | — |
| Main Dimensions & Performance Data | |||
| Section heightT | — | 224 mm | — |
| Section heightT | — | 8.819 in | — |
| Basic dynamic load rating, axialCa | — | 11,700,000 N | — |
| Basic dynamic load rating, axialCa | — | 2,630,395.683 lbf | — |
| Basic static load rating, axialC0a | — | 39,500,000 N | — |
| Basic static load rating, axialC0a | — | 8,880,395.683 lbf | — |
| Fatigue load limit, axialCua | — | 3,450,000 N | — |
| Fatigue load limit, axialCua | — | 775,629.496 lbf | — |
| Manufacturer Identity | |||
| Schaeffler Product Code | — | 396559 | — |
| Official Class Key | — | — | 080-000-000 |
| Base Type | — | 29496 | — |
| Old Designation | — | ["29496-E1-MB"] | — |
| Gpsd Group | — | F03 | — |
| Product Line Id | — | 78 | — |
| X Life Marking | — | XL | — |
| SAP material number | — | 0390007610000 | — |
| Base product | — | 2305110301 | — |
| Bearing X designation | — | 29496-E1-XL-MB | — |
| Mounting Manager ID | — | 29496-E1-XL-MB | — |
| Mounting dimensions | |||
| Minimum diameter shaft shoulderda min | — | 660 mm | — |
| Minimum diameter shaft shoulderda min | — | 25.984 in | — |
| Maximum diameter of housing shoulderDa max | — | 744 mm | — |
| Maximum diameter of housing shoulderDa max | — | 29.291 in | — |
| Minimum bore diameter housingDb min | — | 865 mm | — |
| Minimum bore diameter housingDb min | — | 34.055 in | — |
| Maximum distance sleevedb max | — | 516 mm | — |
| Maximum distance sleevedb max | — | 20.315 in | — |
| Maximum recess radiusra max | — | 8 mm | — |
| Maximum recess radiusra max | — | 0.315 in | — |
| Product characteristics | |||
| Heat treatment | — | Standard | — |
| Locating feature, housing washer | None | Without | — |
| Handling thread holes | — | Without | — |
| Constricted width and inclination variation | — | Standard | — |
| Test certificate | — | Without | — |
| Product identity | |||
| Official product category | Spherical roller thrust bearings | — | — |
| Official taxonomy path | /products/rolling-bearings/roller-bearings/spherical-roller-thrust-bearings | — | — |
| Structure group ID | BHS_001 | — | — |
| Available from SKF | Yes | — | — |
| Remanufacturable | Yes | — | — |
| Product Identity | |||
| Construction | — | Axial spherical roller bearing 294..-E1-XL-MB, with flanging ring | — |
| Short Description | — | Axial spherical roller bearing | — |
| Properties | |||
| Bore type | Cylindrical | — | — |
| Tolerance class | Normal | — | — |
| Candidate for remanufacturing | Yes | — | — |
| Indicative carbon footprint for new product | 2035.0 kg CO 2 e | — | — |
| Indicative carbon footprint for remanufactured product | 677.0 kg CO 2 e | — | — |
| Technical Data | |||
| d | — | — | 850 mm |
| T | — | — | 224 mm |
| R(Min.) | — | — | 9.5 mm |
| Basic Load Ratings Ca | — | — | 10900 kN |
| Bore Diameter (D) | — | 480 mm | — |
| Basic Load Ratings C0A | — | — | 36300 kN |
| Outside Diameter (D) | — | 850 mm | — |
| Fatigue Load Limit : Cu | — | — | 2100 kN |
| Height (T) | — | 224 mm | — |
| Limiting Speeds(Oil Lub.) | — | — | 270 min-1 |
| Basic Dynamic Load Rating, Axial (Ca) | — | 11,700,000 N | — |
| D1 | — | — | 638 mm |
| Basic Static Load Rating, Axial (C0A) | — | 39,500,000 N | — |
| Operating Temperature Min. (Tmin) | — | -30 °C | — |
| B | — | — | 81 mm |
| Limiting Speed (Ng) | — | 710 1/min | — |
| B1 | — | — | 216 mm |
| Operating Temperature Max. (Tmax) | — | 200 °C | — |
| C | — | — | 108 mm |
| Reference Speed (Nϑr) | — | 335 1/min | — |
| A | — | — | 280 mm |
| Minimum Diameter Of Housing Shoulder (Db Min) | — | 865 mm | — |
| Da(Min.) | — | — | 645 mm |
| Bore Diameter Housing Washer (D1) | — | 625 mm | — |
| Da(Max.) | — | — | 730 mm |
| Height Of Shaft Washer (T2) | — | 88 mm | — |
| Ra(Max.) | — | — | 8 mm |
| Height Of The Housing Washer (T1) | — | 108 mm | — |
| Mass(Refer.) | — | — | 548 kg |
| Rip Diameter Shaft Washer (D1) | — | 780 mm | — |
| Height Of The Shaft Washer (T3) | — | 147 mm | — |
| Minimum Diameter Shaft Shoulder (Da Min) | — | 660 mm | — |
| Distance Of The Center Point (A) | — | 280 mm | — |
| Height Of Shaft Washer, Inc. Lip Ring (T4) | — | 216 mm | — |
| Maximum Diameter Of Housing Shoulder (Da Max) | — | 744 mm | — |
| Maximum Distance Sleeve (Db Max) | — | 516 mm | — |
| Minimum Chamfer Dimension (Rmin) | — | 9.5 mm | — |
| Maximum Fillet Radius (Ra Max) | — | 8 mm | — |
| Fatigue Load Limit, Axial (Cua) | — | 3,450,000 N | — |
| Temperature range | |||
| Operating temperature min.Tmin | — | -30 °C | — |
| Operating temperature min.Tmin | — | -22 °F | — |
| Operating temperature max.Tmax | — | 200 °C | — |
| Operating temperature max.Tmax | — | 392 °F | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.