Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Cross Reference centre · Interchange verification checklist · Understand suffix differences
You entered 29492-EM. This table explores the base group 29492; it does not preserve or approve every requested suffix. Search your complete marking first →
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions differ
“29492” across 3 loaded brands
The base designation is shared, but the loaded boundary dimensions do not agree. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | SKF29492 EM460 × 800 × mm | FAG29492-E1-XL-MB460 × 800 × 206 mm | KOYO29492R460 × 800 × 74 mm |
|---|---|---|---|
| Comparable specifications | |||
| Brand | SKF | FAG | KOYO |
| Designation | 29492 EM | 29492-E1-XL-MB | 29492R |
| Product family | Spherical roller thrust bearings | — | — |
| Detailed type | Spherical roller thrust bearing with machined metal cage | Axial spherical roller bearings | Axial spherical roller bearings |
| Series | — | 29492 | — |
| Bore diameterd | 460 mm | 460 mm | 460 mm |
| Outside diameterD | 800 mm | 800 mm | 800 mm |
| WidthB | — | 206 mm | 74 mm |
| HeightH | 206 mm | — | — |
| Basic dynamic load ratingC | 9300 kN | — | — |
| Basic static load ratingC0 | 33500 kN | — | — |
| Fatigue load limitPu | 2450 kN | — | 1870 kN |
| Reference speednref | 430 r/min | 365 r/min | — |
| Limiting speednG | 750 r/min | 760 r/min | 300 r/min |
| Mass≈m | 425 kg | 424.5 kg | 438 kg |
| Cage | Machined brass | MB — Solid brass cage | — |
| Minimum operating temperatureTmin | — | -30 °C | — |
| Maximum operating temperatureTmax | — | 200 °C | — |
| Capabilities & suitability | |||
| Radial load capacity | — | Yes | — |
| Axial load capacity in one direction | — | Yes | — |
| Suitable for grease lubrication | — | Yes | — |
| Suitable for oil lubrication | — | Yes | — |
| Unsealed design | — | Yes | — |
| Largebearing | — | Yes | — |
| Staticangularerrorandmisalignment | — | Yes | — |
| Dynamicangularerrorandmisalignment | — | Yes | — |
| Classification | |||
| Official Category Path | — | — | Spherical thrust roller bearings |
| Official Classification 1 | — | — | Spherical thrust roller bearings |
| Dimensions | |||
| Bore diameter housing washerD1 | — | 596 mm | — |
| Bore diameter housing washerD1 | — | 23.465 in | — |
| Rip diameter shaft washerd1 | — | 735 mm | — |
| Rip diameter shaft washerd1 | — | 28.937 in | — |
| Minimum chamfer dimensionrmin | — | 9.5 mm | — |
| Minimum chamfer dimensionrmin | — | 0.374 in | — |
| Height of the housing washerT1 | — | 101.5 mm | — |
| Height of the housing washerT1 | — | 3.996 in | — |
| Height of shaft washerT2 | — | 77 mm | — |
| Height of shaft washerT2 | — | 3.031 in | — |
| Height of the shaft washerT3 | — | 135 mm | — |
| Height of the shaft washerT3 | — | 5.315 in | — |
| Height of shaft washer, inc. lip ringT4 | — | 199 mm | — |
| Height of shaft washer, inc. lip ringT4 | — | 7.835 in | — |
| Distance of the center pointA | — | 268 mm | — |
| Distance of the center pointA | — | 10.551 in | — |
| Engineering — Abutment dimensions | |||
| Diameter of shaft abutmentd a | min. 630 mm | — | — |
| Diameter of housing abutmentD a | max. 695 mm | — | — |
| Fillet radiusr a | max. 8 mm | — | — |
| Engineering — Calculation data | |||
| Minimum axial load factorA | 100 | — | — |
| Engineering — Dimensions | |||
| Outside diameter of shaft washer end side faced 1 | ≈ 730 mm | — | — |
| Shoulder diameter outer ringD 1 | ≈ 596 mm | — | — |
| Width shaft washer or length of shaft washer bore diameter that fits on shaft (bearings with a machined cage)B | 77 mm | — | — |
| Height shaft washer + cageB 1 | 199 mm | — | — |
| Height housing washerC | 101.5 mm | — | — |
| Distance from shaft washer end side face to pressure points | 268 mm | — | — |
| Chamfer dimension shaft washerr 1,2 | min. 9.5 mm | — | — |
| Logistics | |||
| Product net weight | 425.0 kg | — | — |
| eClass code | 23-05-09-11 | — | — |
| UNSPSC code | 31171507 | — | — |
| Main Dimensions & Performance Data | |||
| Section heightT | — | 206 mm | — |
| Section heightT | — | 8.11 in | — |
| Basic dynamic load rating, axialCa | — | 9,800,000 N | — |
| Basic dynamic load rating, axialCa | — | 2,203,237.41 lbf | — |
| Basic static load rating, axialC0a | — | 33,500,000 N | — |
| Basic static load rating, axialC0a | — | 7,531,474.82 lbf | — |
| Fatigue load limit, axialCua | — | 3,000,000 N | — |
| Fatigue load limit, axialCua | — | 674,460.432 lbf | — |
| Manufacturer Identity | |||
| Schaeffler Product Code | — | 396556 | — |
| Official Class Key | — | — | 080-000-000 |
| Base Type | — | 29492 | — |
| Old Designation | — | ["29492-E1-MB"] | — |
| Gpsd Group | — | F03 | — |
| Product Line Id | — | 78 | — |
| X Life Marking | — | XL | — |
| SAP material number | — | 0390007450000 | — |
| Base product | — | 2305110301 | — |
| Bearing X designation | — | 29492-E1-XL-MB | — |
| Mounting Manager ID | — | 29492-E1-XL-MB | — |
| Mounting dimensions | |||
| Minimum diameter shaft shoulderda min | — | 630 mm | — |
| Minimum diameter shaft shoulderda min | — | 24.803 in | — |
| Maximum diameter of housing shoulderDa max | — | 704 mm | — |
| Maximum diameter of housing shoulderDa max | — | 27.717 in | — |
| Minimum bore diameter housingDb min | — | 815 mm | — |
| Minimum bore diameter housingDb min | — | 32.087 in | — |
| Maximum distance sleevedb max | — | 497 mm | — |
| Maximum distance sleevedb max | — | 19.567 in | — |
| Maximum recess radiusra max | — | 8 mm | — |
| Maximum recess radiusra max | — | 0.315 in | — |
| Performance | |||
| SKF performance class | SKF Explorer | — | — |
| Product characteristics | |||
| Heat treatment | — | Standard | — |
| Locating feature, housing washer | None | Without | — |
| Handling thread holes | — | Without | — |
| Constricted width and inclination variation | — | Standard | — |
| Test certificate | — | Without | — |
| Product identity | |||
| Official product category | Spherical roller thrust bearings | — | — |
| Official taxonomy path | /products/rolling-bearings/roller-bearings/spherical-roller-thrust-bearings | — | — |
| Structure group ID | BHS_001 | — | — |
| Available from SKF | Yes | — | — |
| Remanufacturable | Yes | — | — |
| Product Identity | |||
| Construction | — | Axial spherical roller bearing 294..-E1-XL-MB, with flanging ring | — |
| Short Description | — | Axial spherical roller bearing | — |
| Properties | |||
| Bore type | Cylindrical | — | — |
| Tolerance class | Normal | — | — |
| Candidate for remanufacturing | Yes | — | — |
| Indicative carbon footprint for new product | 1573.0 kg CO 2 e | — | — |
| Indicative carbon footprint for remanufactured product | 523.0 kg CO 2 e | — | — |
| Technical Data | |||
| d | — | — | 800 mm |
| T | — | — | 206 mm |
| R(Min.) | — | — | 9.5 mm |
| Basic Load Ratings Ca | — | — | 9360 kN |
| Bore Diameter (D) | — | 460 mm | — |
| Basic Load Ratings C0A | — | — | 31600 kN |
| Outside Diameter (D) | — | 800 mm | — |
| Fatigue Load Limit : Cu | — | — | 1870 kN |
| Height (T) | — | 206 mm | — |
| Limiting Speeds(Oil Lub.) | — | — | 300 min-1 |
| Basic Dynamic Load Rating, Axial (Ca) | — | 9,800,000 N | — |
| D1 | — | — | 608 mm |
| Basic Static Load Rating, Axial (C0A) | — | 33,500,000 N | — |
| Operating Temperature Min. (Tmin) | — | -30 °C | — |
| B | — | — | 74 mm |
| Limiting Speed (Ng) | — | 760 1/min | — |
| B1 | — | — | 199 mm |
| Operating Temperature Max. (Tmax) | — | 200 °C | — |
| C | — | — | 100 mm |
| Reference Speed (Nϑr) | — | 365 1/min | — |
| A | — | — | 272 mm |
| Minimum Diameter Of Housing Shoulder (Db Min) | — | 815 mm | — |
| Da(Min.) | — | — | 615 mm |
| Bore Diameter Housing Washer (D1) | — | 596 mm | — |
| Da(Max.) | — | — | 690 mm |
| Height Of Shaft Washer (T2) | — | 77 mm | — |
| Ra(Max.) | — | — | 8 mm |
| Height Of The Housing Washer (T1) | — | 101.5 mm | — |
| Mass(Refer.) | — | — | 438 kg |
| Rip Diameter Shaft Washer (D1) | — | 735 mm | — |
| Height Of The Shaft Washer (T3) | — | 135 mm | — |
| Minimum Diameter Shaft Shoulder (Da Min) | — | 630 mm | — |
| Distance Of The Center Point (A) | — | 268 mm | — |
| Height Of Shaft Washer, Inc. Lip Ring (T4) | — | 199 mm | — |
| Maximum Diameter Of Housing Shoulder (Da Max) | — | 704 mm | — |
| Maximum Distance Sleeve (Db Max) | — | 497 mm | — |
| Minimum Chamfer Dimension (Rmin) | — | 9.5 mm | — |
| Maximum Fillet Radius (Ra Max) | — | 8 mm | — |
| Fatigue Load Limit, Axial (Cua) | — | 3,000,000 N | — |
| Temperature range | |||
| Operating temperature min.Tmin | — | -30 °C | — |
| Operating temperature min.Tmin | — | -22 °F | — |
| Operating temperature max.Tmax | — | 200 °C | — |
| Operating temperature max.Tmax | — | 392 °F | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.