Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Cross Reference centre · Interchange verification checklist · Understand suffix differences
You entered 29476-E1-XL-MB. This table explores the base group 29476; it does not preserve or approve every requested suffix. Search your complete marking first →
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions differ
“29476” across 3 loaded brands
The base designation is shared, but the loaded boundary dimensions do not agree. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | SKF29476 EM380 × 670 × mm | FAG29476-E1-XL-MB380 × 670 × 175 mm | KOYO29476R380 × 670 × 63 mm |
|---|---|---|---|
| Comparable specifications | |||
| Brand | SKF | FAG | KOYO |
| Designation | 29476 EM | 29476-E1-XL-MB | 29476R |
| Product family | Spherical roller thrust bearings | — | — |
| Detailed type | Spherical roller thrust bearing with machined metal cage | Axial spherical roller bearings | Axial spherical roller bearings |
| Series | — | 29476 | — |
| Bore diameterd | 380 mm | 380 mm | 380 mm |
| Outside diameterD | 670 mm | 670 mm | 670 mm |
| WidthB | — | 175 mm | 63 mm |
| HeightH | 175 mm | — | — |
| Basic dynamic load ratingC | 6800 kN | — | — |
| Basic static load ratingC0 | 24000 kN | — | — |
| Fatigue load limitPu | 1860 kN | — | 1300 kN |
| Reference speednref | 530 r/min | 445 r/min | — |
| Limiting speednG | 900 r/min | 930 r/min | 410 r/min |
| Mass≈m | 260 kg | 257.5 kg | 263 kg |
| Cage | Machined brass | MB — Solid brass cage | — |
| Minimum operating temperatureTmin | — | -30 °C | — |
| Maximum operating temperatureTmax | — | 200 °C | — |
| Capabilities & suitability | |||
| Radial load capacity | — | Yes | — |
| Axial load capacity in one direction | — | Yes | — |
| Suitable for grease lubrication | — | Yes | — |
| Suitable for oil lubrication | — | Yes | — |
| Unsealed design | — | Yes | — |
| Largebearing | — | Yes | — |
| Staticangularerrorandmisalignment | — | Yes | — |
| Dynamicangularerrorandmisalignment | — | Yes | — |
| Classification | |||
| Official Category Path | — | — | Spherical thrust roller bearings |
| Official Classification 1 | — | — | Spherical thrust roller bearings |
| Dimensions | |||
| Bore diameter housing washerD1 | — | 494 mm | — |
| Bore diameter housing washerD1 | — | 19.449 in | — |
| Rip diameter shaft washerd1 | — | 615 mm | — |
| Rip diameter shaft washerd1 | — | 24.213 in | — |
| Minimum chamfer dimensionrmin | — | 7.5 mm | — |
| Minimum chamfer dimensionrmin | — | 0.295 in | — |
| Height of the housing washerT1 | — | 87.5 mm | — |
| Height of the housing washerT1 | — | 3.445 in | — |
| Height of shaft washerT2 | — | 67 mm | — |
| Height of shaft washerT2 | — | 2.638 in | — |
| Height of the shaft washerT3 | — | 115 mm | — |
| Height of the shaft washerT3 | — | 4.528 in | — |
| Height of shaft washer, inc. lip ringT4 | — | 168 mm | — |
| Height of shaft washer, inc. lip ringT4 | — | 6.614 in | — |
| Distance of the center pointA | — | 222 mm | — |
| Distance of the center pointA | — | 8.74 in | — |
| Engineering — Abutment dimensions | |||
| Diameter of shaft abutmentd a | min. 525 mm | — | — |
| Diameter of housing abutmentD a | max. 580 mm | — | — |
| Fillet radiusr a | max. 6 mm | — | — |
| Engineering — Calculation data | |||
| Minimum axial load factorA | 53 | — | — |
| Engineering — Dimensions | |||
| Outside diameter of shaft washer end side faced 1 | ≈ 610 mm | — | — |
| Shoulder diameter outer ringD 1 | ≈ 494 mm | — | — |
| Width shaft washer or length of shaft washer bore diameter that fits on shaft (bearings with a machined cage)B | 67 mm | — | — |
| Height shaft washer + cageB 1 | 168 mm | — | — |
| Height housing washerC | 87.5 mm | — | — |
| Distance from shaft washer end side face to pressure points | 222 mm | — | — |
| Chamfer dimension shaft washerr 1,2 | min. 7.5 mm | — | — |
| Logistics | |||
| Product net weight | 260.0 kg | — | — |
| eClass code | 23-05-09-11 | — | — |
| UNSPSC code | 31171507 | — | — |
| Main Dimensions & Performance Data | |||
| Section heightT | — | 175 mm | — |
| Section heightT | — | 6.89 in | — |
| Basic dynamic load rating, axialCa | — | 7,200,000 N | — |
| Basic dynamic load rating, axialCa | — | 1,618,705.036 lbf | — |
| Basic static load rating, axialC0a | — | 24,200,000 N | — |
| Basic static load rating, axialC0a | — | 5,440,647.482 lbf | — |
| Fatigue load limit, axialCua | — | 2,200,000 N | — |
| Fatigue load limit, axialCua | — | 494,604.317 lbf | — |
| Manufacturer Identity | |||
| Schaeffler Product Code | — | 396544 | — |
| Official Class Key | — | — | 080-000-000 |
| Base Type | — | 29476 | — |
| Old Designation | — | ["29476-E1-MB"] | — |
| Gpsd Group | — | F03 | — |
| Product Line Id | — | 78 | — |
| X Life Marking | — | XL | — |
| SAP material number | — | 0390007020000 | — |
| Base product | — | 2305110301 | — |
| Bearing X designation | — | 29476-E1-XL-MB | — |
| Mounting Manager ID | — | 29476-E1-XL-MB | — |
| Mounting dimensions | |||
| Minimum diameter shaft shoulderda min | — | 530 mm | — |
| Minimum diameter shaft shoulderda min | — | 20.866 in | — |
| Maximum diameter of housing shoulderDa max | — | 587 mm | — |
| Maximum diameter of housing shoulderDa max | — | 23.11 in | — |
| Minimum bore diameter housingDb min | — | 682 mm | — |
| Minimum bore diameter housingDb min | — | 26.85 in | — |
| Maximum distance sleevedb max | — | 413 mm | — |
| Maximum distance sleevedb max | — | 16.26 in | — |
| Maximum recess radiusra max | — | 6 mm | — |
| Maximum recess radiusra max | — | 0.236 in | — |
| Performance | |||
| SKF performance class | SKF Explorer | — | — |
| Product characteristics | |||
| Heat treatment | — | Standard | — |
| Locating feature, housing washer | None | Without | — |
| Handling thread holes | — | Without | — |
| Constricted width and inclination variation | — | Standard | — |
| Test certificate | — | Without | — |
| Product identity | |||
| Official product category | Spherical roller thrust bearings | — | — |
| Official taxonomy path | /products/rolling-bearings/roller-bearings/spherical-roller-thrust-bearings | — | — |
| Structure group ID | BHS_001 | — | — |
| Available from SKF | Yes | — | — |
| Remanufacturable | Yes | — | — |
| Product Identity | |||
| Construction | — | Axial spherical roller bearing 294..-E1-XL-MB, with flanging ring | — |
| Short Description | — | Axial spherical roller bearing | — |
| Properties | |||
| Bore type | Cylindrical | — | — |
| Tolerance class | Normal | — | — |
| Candidate for remanufacturing | Yes | — | — |
| Indicative carbon footprint for new product | 962.0 kg CO 2 e | — | — |
| Indicative carbon footprint for remanufactured product | 320.0 kg CO 2 e | — | — |
| Technical Data | |||
| d | — | — | 670 mm |
| T | — | — | 175 mm |
| R(Min.) | — | — | 7.5 mm |
| Basic Load Ratings Ca | — | — | 6780 kN |
| Bore Diameter (D) | — | 380 mm | — |
| Basic Load Ratings C0A | — | — | 22000 kN |
| Outside Diameter (D) | — | 670 mm | — |
| Fatigue Load Limit : Cu | — | — | 1300 kN |
| Height (T) | — | 175 mm | — |
| Limiting Speeds(Oil Lub.) | — | — | 410 min-1 |
| Basic Dynamic Load Rating, Axial (Ca) | — | 7,200,000 N | — |
| D1 | — | — | 504 mm |
| Basic Static Load Rating, Axial (C0A) | — | 24,200,000 N | — |
| Operating Temperature Min. (Tmin) | — | -30 °C | — |
| B | — | — | 63 mm |
| Limiting Speed (Ng) | — | 930 1/min | — |
| B1 | — | — | 168 mm |
| Operating Temperature Max. (Tmax) | — | 200 °C | — |
| C | — | — | 85 mm |
| Reference Speed (Nϑr) | — | 445 1/min | — |
| A | — | — | 230 mm |
| Minimum Diameter Of Housing Shoulder (Db Min) | — | 682 mm | — |
| Da(Min.) | — | — | 510 mm |
| Bore Diameter Housing Washer (D1) | — | 494 mm | — |
| Da(Max.) | — | — | 575 mm |
| Height Of Shaft Washer (T2) | — | 67 mm | — |
| Ra(Max.) | — | — | 6 mm |
| Height Of The Housing Washer (T1) | — | 87.5 mm | — |
| Mass(Refer.) | — | — | 263 kg |
| Rip Diameter Shaft Washer (D1) | — | 615 mm | — |
| Height Of The Shaft Washer (T3) | — | 115 mm | — |
| Minimum Diameter Shaft Shoulder (Da Min) | — | 530 mm | — |
| Distance Of The Center Point (A) | — | 222 mm | — |
| Height Of Shaft Washer, Inc. Lip Ring (T4) | — | 168 mm | — |
| Maximum Diameter Of Housing Shoulder (Da Max) | — | 587 mm | — |
| Maximum Distance Sleeve (Db Max) | — | 413 mm | — |
| Minimum Chamfer Dimension (Rmin) | — | 7.5 mm | — |
| Maximum Fillet Radius (Ra Max) | — | 6 mm | — |
| Fatigue Load Limit, Axial (Cua) | — | 2,200,000 N | — |
| Temperature range | |||
| Operating temperature min.Tmin | — | -30 °C | — |
| Operating temperature min.Tmin | — | -22 °F | — |
| Operating temperature max.Tmax | — | 200 °C | — |
| Operating temperature max.Tmax | — | 392 °F | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.