Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions differ
“29468” across 3 loaded brands
The base designation is shared, but the loaded boundary dimensions do not agree. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | SKF29468 E340 × 620 × mm | FAG29468-E1-XL340 × 620 × 170 mm | KOYO29468R340 × 620 × 61 mm |
|---|---|---|---|
| Comparable specifications | |||
| Brand | SKF | FAG | KOYO |
| Designation | 29468 E | 29468-E1-XL | 29468R |
| Product family | Spherical roller thrust bearings | — | — |
| Detailed type | Spherical roller thrust bearing with stamped steel cage | Axial spherical roller bearings | Axial spherical roller bearings |
| Series | — | 29468 | — |
| Bore diameterd | 340 mm | 340 mm | 340 mm |
| Outside diameterD | 620 mm | 620 mm | 620 mm |
| WidthB | — | 170 mm | 61 mm |
| HeightH | 170 mm | — | — |
| Basic dynamic load ratingC | 6700 kN | — | — |
| Basic static load ratingC0 | 22400 kN | — | — |
| Fatigue load limitPu | 1760 kN | — | 1210 kN |
| Reference speednref | 560 r/min | 475 r/min | — |
| Limiting speednG | 1000 r/min | 1020 r/min | 450 r/min |
| Mass≈m | 206 kg | 205.52 kg | 224 kg |
| Cage | Sheet metal | JP — Sheet metal cage | — |
| Minimum operating temperatureTmin | — | -30 °C | — |
| Maximum operating temperatureTmax | — | 200 °C | — |
| Capabilities & suitability | |||
| Radial load capacity | — | Yes | — |
| Axial load capacity in one direction | — | Yes | — |
| Suitable for grease lubrication | — | Yes | — |
| Suitable for oil lubrication | — | Yes | — |
| Unsealed design | — | Yes | — |
| Largebearing | — | Yes | — |
| Staticangularerrorandmisalignment | — | Yes | — |
| Dynamicangularerrorandmisalignment | — | Yes | — |
| Classification | |||
| Official Category Path | — | — | Spherical thrust roller bearings |
| Official Classification 1 | — | — | Spherical thrust roller bearings |
| Dimensions | |||
| Bore diameter housing washerD1 | — | 445 mm | — |
| Bore diameter housing washerD1 | — | 17.52 in | — |
| Rip diameter shaft washerd1 | — | 564.9 mm | — |
| Rip diameter shaft washerd1 | — | 22.24 in | — |
| Minimum chamfer dimensionrmin | — | 7.5 mm | — |
| Minimum chamfer dimensionrmin | — | 0.295 in | — |
| Height of the housing washerT1 | — | 84 mm | — |
| Height of the housing washerT1 | — | 3.307 in | — |
| Height of the shaft washerT3 | — | 112 mm | — |
| Height of the shaft washerT3 | — | 4.409 in | — |
| Distance shaft washer - cageT5 | — | 151.3 mm | — |
| Distance shaft washer - cageT5 | — | 5.957 in | — |
| Distance of the center pointA | — | 201 mm | — |
| Distance of the center pointA | — | 7.913 in | — |
| Engineering — Abutment dimensions | |||
| Diameter of shaft abutmentd a | min. 475 mm | — | — |
| Abutment diameter of spacer ringd b1 | max. 363 mm | — | — |
| Outside diameter of spacer ringd b2 | max. 386 mm | — | — |
| Diameter of housing abutmentD a | max. 530 mm | — | — |
| Fillet radiusr a | max. 6 mm | — | — |
| Engineering — Calculation data | |||
| Minimum axial load factorA | 46 | — | — |
| Engineering — Dimensions | |||
| Outside diameter of shaft washer end side faced 1 | ≈ 557 mm | — | — |
| Shoulder diameter outer ringD 1 | ≈ 445 mm | — | — |
| Width shaft washer or length of shaft washer bore diameter that fits on shaft (bearings with a stamped steel cage)B | 112 mm | — | — |
| Height shaft washer + cageB 1 | 151.4 mm | — | — |
| Height housing washerC | 84 mm | — | — |
| Distance from shaft washer end side face to pressure points | 201 mm | — | — |
| Chamfer dimension shaft washerr 1,2 | min. 7.5 mm | — | — |
| Logistics | |||
| Product net weight | 206.0 kg | — | — |
| eClass code | 23-05-09-11 | — | — |
| UNSPSC code | 31171507 | — | — |
| Main Dimensions & Performance Data | |||
| Basic dynamic load rating, axialCa | — | 7,200,000 N | — |
| Basic dynamic load rating, axialCa | — | 1,618,705.036 lbf | — |
| Basic static load rating, axialC0a | — | 23,100,000 N | — |
| Basic static load rating, axialC0a | — | 5,193,345.324 lbf | — |
| Fatigue load limit, axialCua | — | 2,090,000 N | — |
| Fatigue load limit, axialCua | — | 469,874.101 lbf | — |
| Manufacturer Identity | |||
| Schaeffler Product Code | — | 396719 | — |
| Official Class Key | — | — | 080-000-000 |
| Base Type | — | 29468 | — |
| Old Designation | — | ["29468-E1"] | — |
| Gpsd Group | — | F03 | — |
| Product Line Id | — | 78 | — |
| X Life Marking | — | XL | — |
| SAP material number | — | 0390006800000 | — |
| Base product | — | 2305110302 | — |
| Bearing X designation | — | 29468-E1-XL | — |
| Mounting Manager ID | — | 29468-E1-XL | — |
| Mounting dimensions | |||
| Minimum diameter shaft shoulderda min | — | 480 mm | — |
| Minimum diameter shaft shoulderda min | — | 18.898 in | — |
| Maximum diameter of housing shoulderDa max | — | 541 mm | — |
| Maximum diameter of housing shoulderDa max | — | 21.299 in | — |
| Minimum bore diameter housingDb min | — | 630 mm | — |
| Minimum bore diameter housingDb min | — | 24.803 in | — |
| Maximum distance sleevedb max | — | 386 mm | — |
| Maximum distance sleevedb max | — | 15.197 in | — |
| Maximum champfer diameter of distance sleevedb1 max | — | 364 mm | — |
| Maximum champfer diameter of distance sleevedb1 max | — | 14.331 in | — |
| Maximum recess radiusra max | — | 6 mm | — |
| Maximum recess radiusra max | — | 0.236 in | — |
| Angle of champfer of the distance sleeve | — | 30 ° | — |
| Performance | |||
| SKF performance class | SKF Explorer | — | — |
| Product characteristics | |||
| Heat treatment | — | Standard | — |
| Locating feature, housing washer | None | Without | — |
| Handling thread holes | — | Without | — |
| Constricted width and inclination variation | — | Standard | — |
| Test certificate | — | Without | — |
| Product identity | |||
| Official product category | Spherical roller thrust bearings | — | — |
| Official taxonomy path | /products/rolling-bearings/roller-bearings/spherical-roller-thrust-bearings | — | — |
| Structure group ID | BHS_001 | — | — |
| Available from SKF | Yes | — | — |
| Remanufacturable | Yes | — | — |
| Product Identity | |||
| Construction | — | Axial spherical roller bearing 294..-E1-XL, no flanging ring | — |
| Short Description | — | Axial spherical roller bearing | — |
| Properties | |||
| Bore type | Cylindrical | — | — |
| Tolerance class | Normal | — | — |
| Candidate for remanufacturing | Yes | — | — |
| Indicative carbon footprint for new product | 763.0 kg CO 2 e | — | — |
| Indicative carbon footprint for remanufactured product | 254.0 kg CO 2 e | — | — |
| Technical Data | |||
| d | — | — | 620 mm |
| T | — | — | 170 mm |
| R(Min.) | — | — | 7.5 mm |
| Basic Load Ratings Ca | — | — | 6190 kN |
| Bore Diameter (D) | — | 340 mm | — |
| Basic Load Ratings C0A | — | — | 19400 kN |
| Outside Diameter (D) | — | 620 mm | — |
| Fatigue Load Limit : Cu | — | — | 1210 kN |
| Height (T) | — | 170 mm | — |
| Limiting Speeds(Oil Lub.) | — | — | 450 min-1 |
| Basic Dynamic Load Rating, Axial (Ca) | — | 7,200,000 N | — |
| D1 | — | — | 462 mm |
| Basic Static Load Rating, Axial (C0A) | — | 23,100,000 N | — |
| Operating Temperature Min. (Tmin) | — | -30 °C | — |
| B | — | — | 61 mm |
| Limiting Speed (Ng) | — | 1,020 1/min | — |
| B1 | — | — | 164 mm |
| Operating Temperature Max. (Tmax) | — | 200 °C | — |
| C | — | — | 82 mm |
| Reference Speed (Nϑr) | — | 475 1/min | — |
| A | — | — | 201 mm |
| Minimum Diameter Of Housing Shoulder (Db Min) | — | 630 mm | — |
| Da(Min.) | — | — | 465 mm |
| Bore Diameter Housing Washer (D1) | — | 445 mm | — |
| Da(Max.) | — | — | 530 mm |
| Height Of The Housing Washer (T1) | — | 84 mm | — |
| Ra(Max.) | — | — | 6 mm |
| Rip Diameter Shaft Washer (D1) | — | 564.9 mm | — |
| Mass(Refer.) | — | — | 224 kg |
| Angle Of Champfer Of The Distance Sleeve (Angle Of Cha) | — | 30 ° | — |
| Height Of The Shaft Washer (T3) | — | 112 mm | — |
| Distance Shaft Washer Cage (T5) | — | 151.3 mm | — |
| Maximum Champfer Diameter Of Distance Sleeve (Db1 Max) | — | 364 mm | — |
| Minimum Diameter Shaft Shoulder (Da Min) | — | 480 mm | — |
| Distance Of The Center Point (A) | — | 201 mm | — |
| Maximum Diameter Of Housing Shoulder (Da Max) | — | 541 mm | — |
| Maximum Distance Sleeve (Db Max) | — | 386 mm | — |
| Minimum Chamfer Dimension (Rmin) | — | 7.5 mm | — |
| Maximum Fillet Radius (Ra Max) | — | 6 mm | — |
| Fatigue Load Limit, Axial (Cua) | — | 2,090,000 N | — |
| Temperature range | |||
| Operating temperature min.Tmin | — | -30 °C | — |
| Operating temperature min.Tmin | — | -22 °F | — |
| Operating temperature max.Tmax | — | 200 °C | — |
| Operating temperature max.Tmax | — | 392 °F | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.