Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions differ
“29464” across 3 loaded brands
The base designation is shared, but the loaded boundary dimensions do not agree. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | SKF29464 E320 × 580 × mm | FAG29464-E1-XL320 × 580 × 155 mm | KOYO29464R320 × 580 × 55 mm |
|---|---|---|---|
| Comparable specifications | |||
| Brand | SKF | FAG | KOYO |
| Designation | 29464 E | 29464-E1-XL | 29464R |
| Product family | Spherical roller thrust bearings | — | — |
| Detailed type | Spherical roller thrust bearing with stamped steel cage | Axial spherical roller bearings | Axial spherical roller bearings |
| Series | — | 29464 | — |
| Bore diameterd | 320 mm | 320 mm | 320 mm |
| Outside diameterD | 580 mm | 580 mm | 580 mm |
| WidthB | — | 155 mm | 55 mm |
| HeightH | 155 mm | — | — |
| Basic dynamic load ratingC | 5700 kN | — | — |
| Basic static load ratingC0 | 19000 kN | — | — |
| Fatigue load limitPu | 1530 kN | — | 1040 kN |
| Reference speednref | 600 r/min | 530 r/min | — |
| Limiting speednG | 1100 r/min | 1090 r/min | 500 r/min |
| Mass≈m | 163 kg | 163.06 kg | 179 kg |
| Cage | Sheet metal | JP — Sheet metal cage | — |
| Minimum operating temperatureTmin | — | -30 °C | — |
| Maximum operating temperatureTmax | — | 200 °C | — |
| Capabilities & suitability | |||
| Radial load capacity | — | Yes | — |
| Axial load capacity in one direction | — | Yes | — |
| Suitable for grease lubrication | — | Yes | — |
| Suitable for oil lubrication | — | Yes | — |
| Unsealed design | — | Yes | — |
| Largebearing | — | Yes | — |
| Staticangularerrorandmisalignment | — | Yes | — |
| Dynamicangularerrorandmisalignment | — | Yes | — |
| Classification | |||
| Official Category Path | — | — | Spherical thrust roller bearings |
| Official Classification 1 | — | — | Spherical thrust roller bearings |
| Dimensions | |||
| Bore diameter housing washerD1 | — | 422 mm | — |
| Bore diameter housing washerD1 | — | 16.614 in | — |
| Rip diameter shaft washerd1 | — | 534.4 mm | — |
| Rip diameter shaft washerd1 | — | 21.039 in | — |
| Minimum chamfer dimensionrmin | — | 7.5 mm | — |
| Minimum chamfer dimensionrmin | — | 0.295 in | — |
| Height of the housing washerT1 | — | 74.5 mm | — |
| Height of the housing washerT1 | — | 2.933 in | — |
| Height of the shaft washerT3 | — | 102 mm | — |
| Height of the shaft washerT3 | — | 4.016 in | — |
| Distance shaft washer - cageT5 | — | 139.7 mm | — |
| Distance shaft washer - cageT5 | — | 5.5 in | — |
| Distance of the center pointA | — | 191 mm | — |
| Distance of the center pointA | — | 7.52 in | — |
| Engineering — Abutment dimensions | |||
| Diameter of shaft abutmentd a | min. 450 mm | — | — |
| Abutment diameter of spacer ringd b1 | max. 344 mm | — | — |
| Outside diameter of spacer ringd b2 | max. 367 mm | — | — |
| Diameter of housing abutmentD a | max. 500 mm | — | — |
| Fillet radiusr a | max. 6 mm | — | — |
| Engineering — Calculation data | |||
| Minimum axial load factorA | 32 | — | — |
| Engineering — Dimensions | |||
| Outside diameter of shaft washer end side faced 1 | ≈ 520 mm | — | — |
| Shoulder diameter outer ringD 1 | ≈ 422 mm | — | — |
| Width shaft washer or length of shaft washer bore diameter that fits on shaft (bearings with a stamped steel cage)B | 102 mm | — | — |
| Height shaft washer + cageB 1 | 139.4 mm | — | — |
| Height housing washerC | 74.5 mm | — | — |
| Distance from shaft washer end side face to pressure points | 191 mm | — | — |
| Chamfer dimension shaft washerr 1,2 | min. 7.5 mm | — | — |
| Logistics | |||
| Product net weight | 163.0 kg | — | — |
| eClass code | 23-05-09-11 | — | — |
| UNSPSC code | 31171507 | — | — |
| Main Dimensions & Performance Data | |||
| Basic dynamic load rating, axialCa | — | 6,000,000 N | — |
| Basic dynamic load rating, axialCa | — | 1,348,920.863 lbf | — |
| Basic static load rating, axialC0a | — | 19,100,000 N | — |
| Basic static load rating, axialC0a | — | 4,294,064.748 lbf | — |
| Fatigue load limit, axialCua | — | 1,790,000 N | — |
| Fatigue load limit, axialCua | — | 402,428.058 lbf | — |
| Manufacturer Identity | |||
| Schaeffler Product Code | — | 396715 | — |
| Official Class Key | — | — | 080-000-000 |
| Base Type | — | 29464 | — |
| Old Designation | — | ["29464-E1"] | — |
| Gpsd Group | — | F03 | — |
| Product Line Id | — | 78 | — |
| X Life Marking | — | XL | — |
| SAP material number | — | 0390006640000 | — |
| Base product | — | 2305110302 | — |
| Bearing X designation | — | 29464-E1-XL | — |
| Mounting Manager ID | — | 29464-E1-XL | — |
| Mounting dimensions | |||
| Minimum diameter shaft shoulderda min | — | 445 mm | — |
| Minimum diameter shaft shoulderda min | — | 17.52 in | — |
| Maximum diameter of housing shoulderDa max | — | 507 mm | — |
| Maximum diameter of housing shoulderDa max | — | 19.961 in | — |
| Minimum bore diameter housingDb min | — | 590 mm | — |
| Minimum bore diameter housingDb min | — | 23.228 in | — |
| Maximum distance sleevedb max | — | 367 mm | — |
| Maximum distance sleevedb max | — | 14.449 in | — |
| Maximum champfer diameter of distance sleevedb1 max | — | 346 mm | — |
| Maximum champfer diameter of distance sleevedb1 max | — | 13.622 in | — |
| Maximum recess radiusra max | — | 6 mm | — |
| Maximum recess radiusra max | — | 0.236 in | — |
| Angle of champfer of the distance sleeve | — | 30 ° | — |
| Performance | |||
| SKF performance class | SKF Explorer | — | — |
| Product characteristics | |||
| Heat treatment | — | Standard | — |
| Locating feature, housing washer | None | Without | — |
| Handling thread holes | — | Without | — |
| Constricted width and inclination variation | — | Standard | — |
| Test certificate | — | Without | — |
| Product identity | |||
| Official product category | Spherical roller thrust bearings | — | — |
| Official taxonomy path | /products/rolling-bearings/roller-bearings/spherical-roller-thrust-bearings | — | — |
| Structure group ID | BHS_001 | — | — |
| Available from SKF | Yes | — | — |
| Remanufacturable | Yes | — | — |
| Product Identity | |||
| Construction | — | Axial spherical roller bearing 294..-E1-XL, no flanging ring | — |
| Short Description | — | Axial spherical roller bearing | — |
| Properties | |||
| Bore type | Cylindrical | — | — |
| Tolerance class | Normal | — | — |
| Candidate for remanufacturing | Yes | — | — |
| Indicative carbon footprint for new product | 602.0 kg CO 2 e | — | — |
| Indicative carbon footprint for remanufactured product | 200.0 kg CO 2 e | — | — |
| Technical Data | |||
| d | — | — | 580 mm |
| T | — | — | 155 mm |
| R(Min.) | — | — | 7.5 mm |
| Basic Load Ratings Ca | — | — | 5190 kN |
| Bore Diameter (D) | — | 320 mm | — |
| Basic Load Ratings C0A | — | — | 16100 kN |
| Outside Diameter (D) | — | 580 mm | — |
| Fatigue Load Limit : Cu | — | — | 1040 kN |
| Height (T) | — | 155 mm | — |
| Limiting Speeds(Oil Lub.) | — | — | 500 min-1 |
| Basic Dynamic Load Rating, Axial (Ca) | — | 6,000,000 N | — |
| D1 | — | — | 435 mm |
| Basic Static Load Rating, Axial (C0A) | — | 19,100,000 N | — |
| Operating Temperature Min. (Tmin) | — | -30 °C | — |
| B | — | — | 55 mm |
| Limiting Speed (Ng) | — | 1,090 1/min | — |
| B1 | — | — | 149 mm |
| Operating Temperature Max. (Tmax) | — | 200 °C | — |
| C | — | — | 75 mm |
| Reference Speed (Nϑr) | — | 530 1/min | — |
| A | — | — | 191 mm |
| Minimum Diameter Of Housing Shoulder (Db Min) | — | 590 mm | — |
| Da(Min.) | — | — | 435 mm |
| Bore Diameter Housing Washer (D1) | — | 422 mm | — |
| Da(Max.) | — | — | 495 mm |
| Height Of The Housing Washer (T1) | — | 74.5 mm | — |
| Ra(Max.) | — | — | 6 mm |
| Rip Diameter Shaft Washer (D1) | — | 534.4 mm | — |
| Mass(Refer.) | — | — | 179 kg |
| Angle Of Champfer Of The Distance Sleeve (Angle Of Cha) | — | 30 ° | — |
| Height Of The Shaft Washer (T3) | — | 102 mm | — |
| Distance Shaft Washer Cage (T5) | — | 139.7 mm | — |
| Maximum Champfer Diameter Of Distance Sleeve (Db1 Max) | — | 346 mm | — |
| Minimum Diameter Shaft Shoulder (Da Min) | — | 445 mm | — |
| Distance Of The Center Point (A) | — | 191 mm | — |
| Maximum Diameter Of Housing Shoulder (Da Max) | — | 507 mm | — |
| Maximum Distance Sleeve (Db Max) | — | 367 mm | — |
| Minimum Chamfer Dimension (Rmin) | — | 7.5 mm | — |
| Maximum Fillet Radius (Ra Max) | — | 6 mm | — |
| Fatigue Load Limit, Axial (Cua) | — | 1,790,000 N | — |
| Temperature range | |||
| Operating temperature min.Tmin | — | -30 °C | — |
| Operating temperature min.Tmin | — | -22 °F | — |
| Operating temperature max.Tmax | — | 200 °C | — |
| Operating temperature max.Tmax | — | 392 °F | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.