Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Cross Reference centre · Interchange verification checklist · Understand suffix differences
You entered 29460-E1-XL-THI. This table explores the base group 29460; it does not preserve or approve every requested suffix. Search your complete marking first →
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions differ
“29460” across 3 loaded brands
The base designation is shared, but the loaded boundary dimensions do not agree. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | SKF29460 E300 × 540 × mm | FAG29460-E1-XL300 × 540 × 145 mm | KOYO29460R300 × 540 × 52 mm |
|---|---|---|---|
| Comparable specifications | |||
| Brand | SKF | FAG | KOYO |
| Designation | 29460 E | 29460-E1-XL | 29460R |
| Product family | Spherical roller thrust bearings | — | — |
| Detailed type | Spherical roller thrust bearing with stamped steel cage | Axial spherical roller bearings | Axial spherical roller bearings |
| Series | — | 29460 | — |
| Bore diameterd | 300 mm | 300 mm | 300 mm |
| Outside diameterD | 540 mm | 540 mm | 540 mm |
| WidthB | — | 145 mm | 52 mm |
| HeightH | 145 mm | — | — |
| Basic dynamic load ratingC | 5000 kN | — | — |
| Basic static load ratingC0 | 16600 kN | — | — |
| Fatigue load limitPu | 1340 kN | — | 925 kN |
| Reference speednref | 670 r/min | 570 r/min | — |
| Limiting speednG | 1200 r/min | 1180 r/min | 550 r/min |
| Mass≈m | 132 kg | 129.86 kg | 146 kg |
| Cage | Sheet metal | JP — Sheet metal cage | — |
| Minimum operating temperatureTmin | — | -30 °C | — |
| Maximum operating temperatureTmax | — | 200 °C | — |
| Capabilities & suitability | |||
| Radial load capacity | — | Yes | — |
| Axial load capacity in one direction | — | Yes | — |
| Suitable for grease lubrication | — | Yes | — |
| Suitable for oil lubrication | — | Yes | — |
| Unsealed design | — | Yes | — |
| Largebearing | — | Yes | — |
| Staticangularerrorandmisalignment | — | Yes | — |
| Dynamicangularerrorandmisalignment | — | Yes | — |
| Classification | |||
| Official Category Path | — | — | Spherical thrust roller bearings |
| Official Classification 1 | — | — | Spherical thrust roller bearings |
| Dimensions | |||
| Bore diameter housing washerD1 | — | 392 mm | — |
| Bore diameter housing washerD1 | — | 15.433 in | — |
| Rip diameter shaft washerd1 | — | 490 mm | — |
| Rip diameter shaft washerd1 | — | 19.291 in | — |
| Minimum chamfer dimensionrmin | — | 6 mm | — |
| Minimum chamfer dimensionrmin | — | 0.236 in | — |
| Height of the housing washerT1 | — | 70 mm | — |
| Height of the housing washerT1 | — | 2.756 in | — |
| Height of the shaft washerT3 | — | 95 mm | — |
| Height of the shaft washerT3 | — | 3.74 in | — |
| Distance shaft washer - cageT5 | — | 129.5 mm | — |
| Distance shaft washer - cageT5 | — | 5.098 in | — |
| Distance of the center pointA | — | 175 mm | — |
| Distance of the center pointA | — | 6.89 in | — |
| Engineering — Abutment dimensions | |||
| Diameter of shaft abutmentd a | min. 415 mm | — | — |
| Abutment diameter of spacer ringd b1 | max. 319 mm | — | — |
| Outside diameter of spacer ringd b2 | max. 340 mm | — | — |
| Diameter of housing abutmentD a | max. 465 mm | — | — |
| Fillet radiusr a | max. 5 mm | — | — |
| Engineering — Calculation data | |||
| Minimum axial load factorA | 24 | — | — |
| Engineering — Dimensions | |||
| Outside diameter of shaft washer end side faced 1 | ≈ 485 mm | — | — |
| Shoulder diameter outer ringD 1 | ≈ 392 mm | — | — |
| Width shaft washer or length of shaft washer bore diameter that fits on shaft (bearings with a stamped steel cage)B | 95 mm | — | — |
| Height shaft washer + cageB 1 | 130.3 mm | — | — |
| Height housing washerC | 70.5 mm | — | — |
| Distance from shaft washer end side face to pressure points | 175 mm | — | — |
| Chamfer dimension shaft washerr 1,2 | min. 6 mm | — | — |
| Logistics | |||
| Product net weight | 132.0 kg | — | — |
| eClass code | 23-05-09-11 | — | — |
| UNSPSC code | 31171507 | — | — |
| Main Dimensions & Performance Data | |||
| Basic dynamic load rating, axialCa | — | 5,200,000 N | — |
| Basic dynamic load rating, axialCa | — | 1,169,064.748 lbf | — |
| Basic static load rating, axialC0a | — | 16,200,000 N | — |
| Basic static load rating, axialC0a | — | 3,642,086.331 lbf | — |
| Fatigue load limit, axialCua | — | 1,550,000 N | — |
| Fatigue load limit, axialCua | — | 348,471.223 lbf | — |
| Manufacturer Identity | |||
| Schaeffler Product Code | — | 396711 | — |
| Official Class Key | — | — | 080-000-000 |
| Base Type | — | 29460 | — |
| Old Designation | — | ["29460-E1"] | — |
| Gpsd Group | — | F03 | — |
| Product Line Id | — | 78 | — |
| X Life Marking | — | XL | — |
| SAP material number | — | 0390006560000 | — |
| Base product | — | 2305110302 | — |
| Bearing X designation | — | 29460-E1-XL | — |
| Mounting Manager ID | — | 29460-E1-XL | — |
| Mounting dimensions | |||
| Minimum diameter shaft shoulderda min | — | 420 mm | — |
| Minimum diameter shaft shoulderda min | — | 16.535 in | — |
| Maximum diameter of housing shoulderDa max | — | 471 mm | — |
| Maximum diameter of housing shoulderDa max | — | 18.543 in | — |
| Minimum bore diameter housingDb min | — | 550 mm | — |
| Minimum bore diameter housingDb min | — | 21.654 in | — |
| Maximum distance sleevedb max | — | 340 mm | — |
| Maximum distance sleevedb max | — | 13.386 in | — |
| Maximum champfer diameter of distance sleevedb1 max | — | 324 mm | — |
| Maximum champfer diameter of distance sleevedb1 max | — | 12.756 in | — |
| Maximum recess radiusra max | — | 5 mm | — |
| Maximum recess radiusra max | — | 0.197 in | — |
| Angle of champfer of the distance sleeve | — | 30 ° | — |
| Performance | |||
| SKF performance class | SKF Explorer | — | — |
| Product characteristics | |||
| Heat treatment | — | Standard | — |
| Locating feature, housing washer | None | Without | — |
| Handling thread holes | — | Without | — |
| Constricted width and inclination variation | — | Standard | — |
| Test certificate | — | Without | — |
| Product identity | |||
| Official product category | Spherical roller thrust bearings | — | — |
| Official taxonomy path | /products/rolling-bearings/roller-bearings/spherical-roller-thrust-bearings | — | — |
| Structure group ID | BHS_001 | — | — |
| Available from SKF | Yes | — | — |
| Remanufacturable | Yes | — | — |
| Product Identity | |||
| Construction | — | Axial spherical roller bearing 294..-E1-XL, no flanging ring | — |
| Short Description | — | Axial spherical roller bearing | — |
| Properties | |||
| Bore type | Cylindrical | — | — |
| Tolerance class | Normal | — | — |
| Candidate for remanufacturing | Yes | — | — |
| Indicative carbon footprint for new product | 487.0 kg CO 2 e | — | — |
| Indicative carbon footprint for remanufactured product | 162.0 kg CO 2 e | — | — |
| Technical Data | |||
| d | — | — | 540 mm |
| T | — | — | 145 mm |
| R(Min.) | — | — | 6 mm |
| Basic Load Ratings Ca | — | — | 4670 kN |
| Bore Diameter (D) | — | 300 mm | — |
| Basic Load Ratings C0A | — | — | 14900 kN |
| Outside Diameter (D) | — | 540 mm | — |
| Fatigue Load Limit : Cu | — | — | 925 kN |
| Height (T) | — | 145 mm | — |
| Limiting Speeds(Oil Lub.) | — | — | 550 min-1 |
| Basic Dynamic Load Rating, Axial (Ca) | — | 5,200,000 N | — |
| D1 | — | — | 402 mm |
| Basic Static Load Rating, Axial (C0A) | — | 16,200,000 N | — |
| Operating Temperature Min. (Tmin) | — | -30 °C | — |
| B | — | — | 52 mm |
| Limiting Speed (Ng) | — | 1,180 1/min | — |
| B1 | — | — | 140 mm |
| Operating Temperature Max. (Tmax) | — | 200 °C | — |
| C | — | — | 70 mm |
| Reference Speed (Nϑr) | — | 570 1/min | — |
| A | — | — | 175 mm |
| Minimum Diameter Of Housing Shoulder (Db Min) | — | 550 mm | — |
| Da(Min.) | — | — | 410 mm |
| Bore Diameter Housing Washer (D1) | — | 392 mm | — |
| Da(Max.) | — | — | 460 mm |
| Height Of The Housing Washer (T1) | — | 70 mm | — |
| Ra(Max.) | — | — | 5 mm |
| Rip Diameter Shaft Washer (D1) | — | 490 mm | — |
| Mass(Refer.) | — | — | 146 kg |
| Angle Of Champfer Of The Distance Sleeve (Angle Of Cha) | — | 30 ° | — |
| Height Of The Shaft Washer (T3) | — | 95 mm | — |
| Distance Shaft Washer Cage (T5) | — | 129.5 mm | — |
| Maximum Champfer Diameter Of Distance Sleeve (Db1 Max) | — | 324 mm | — |
| Minimum Diameter Shaft Shoulder (Da Min) | — | 420 mm | — |
| Distance Of The Center Point (A) | — | 175 mm | — |
| Maximum Diameter Of Housing Shoulder (Da Max) | — | 471 mm | — |
| Maximum Distance Sleeve (Db Max) | — | 340 mm | — |
| Minimum Chamfer Dimension (Rmin) | — | 6 mm | — |
| Maximum Fillet Radius (Ra Max) | — | 5 mm | — |
| Fatigue Load Limit, Axial (Cua) | — | 1,550,000 N | — |
| Temperature range | |||
| Operating temperature min.Tmin | — | -30 °C | — |
| Operating temperature min.Tmin | — | -22 °F | — |
| Operating temperature max.Tmax | — | 200 °C | — |
| Operating temperature max.Tmax | — | 392 °F | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.