Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions differ
“29456” across 3 loaded brands
The base designation is shared, but the loaded boundary dimensions do not agree. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | SKF29456 E280 × 520 × mm | FAG29456-E1-XL280 × 520 × 145 mm | KOYO29456R280 × 520 × 52 mm |
|---|---|---|---|
| Comparable specifications | |||
| Brand | SKF | FAG | KOYO |
| Designation | 29456 E | 29456-E1-XL | 29456R |
| Product family | Spherical roller thrust bearings | — | — |
| Detailed type | Spherical roller thrust bearing with stamped steel cage | Axial spherical roller bearings | Axial spherical roller bearings |
| Series | — | 29456 | — |
| Bore diameterd | 280 mm | 280 mm | 280 mm |
| Outside diameterD | 520 mm | 520 mm | 520 mm |
| WidthB | — | 145 mm | 52 mm |
| HeightH | 145 mm | — | — |
| Basic dynamic load ratingC | 4900 kN | — | — |
| Basic static load ratingC0 | 15300 kN | — | — |
| Fatigue load limitPu | 1320 kN | — | 907 kN |
| Reference speednref | 670 r/min | 600 r/min | — |
| Limiting speednG | 1200 r/min | 1230 r/min | 550 r/min |
| Mass≈m | 125 kg | 124.44 kg | 137 kg |
| Cage | Sheet metal | JP — Sheet metal cage | — |
| Minimum operating temperatureTmin | — | -30 °C | — |
| Maximum operating temperatureTmax | — | 200 °C | — |
| Capabilities & suitability | |||
| Radial load capacity | — | Yes | — |
| Axial load capacity in one direction | — | Yes | — |
| Suitable for grease lubrication | — | Yes | — |
| Suitable for oil lubrication | — | Yes | — |
| Unsealed design | — | Yes | — |
| Largebearing | — | Yes | — |
| Staticangularerrorandmisalignment | — | Yes | — |
| Dynamicangularerrorandmisalignment | — | Yes | — |
| Classification | |||
| Official Category Path | — | — | Spherical thrust roller bearings |
| Official Classification 1 | — | — | Spherical thrust roller bearings |
| Dimensions | |||
| Bore diameter housing washerD1 | — | 372 mm | — |
| Bore diameter housing washerD1 | — | 14.646 in | — |
| Rip diameter shaft washerd1 | — | 473.1 mm | — |
| Rip diameter shaft washerd1 | — | 18.626 in | — |
| Minimum chamfer dimensionrmin | — | 6 mm | — |
| Minimum chamfer dimensionrmin | — | 0.236 in | — |
| Height of the housing washerT1 | — | 70 mm | — |
| Height of the housing washerT1 | — | 2.756 in | — |
| Height of the shaft washerT3 | — | 95 mm | — |
| Height of the shaft washerT3 | — | 3.74 in | — |
| Distance shaft washer - cageT5 | — | 130.5 mm | — |
| Distance shaft washer - cageT5 | — | 5.138 in | — |
| Distance of the center pointA | — | 166 mm | — |
| Distance of the center pointA | — | 6.535 in | — |
| Engineering — Abutment dimensions | |||
| Diameter of shaft abutmentd a | min. 395 mm | — | — |
| Abutment diameter of spacer ringd b1 | max. 300 mm | — | — |
| Outside diameter of spacer ringd b2 | max. 320 mm | — | — |
| Diameter of housing abutmentD a | max. 446 mm | — | — |
| Fillet radiusr a | max. 5 mm | — | — |
| Engineering — Calculation data | |||
| Minimum axial load factorA | 22 | — | — |
| Engineering — Dimensions | |||
| Outside diameter of shaft washer end side faced 1 | ≈ 464 mm | — | — |
| Shoulder diameter outer ringD 1 | ≈ 372 mm | — | — |
| Width shaft washer or length of shaft washer bore diameter that fits on shaft (bearings with a stamped steel cage)B | 95 mm | — | — |
| Height shaft washer + cageB 1 | 129.9 mm | — | — |
| Height housing washerC | 70 mm | — | — |
| Distance from shaft washer end side face to pressure points | 166 mm | — | — |
| Chamfer dimension shaft washerr 1,2 | min. 6 mm | — | — |
| Logistics | |||
| Product net weight | 125.0 kg | — | — |
| eClass code | 23-05-09-11 | — | — |
| UNSPSC code | 31171507 | — | — |
| Main Dimensions & Performance Data | |||
| Basic dynamic load rating, axialCa | — | 5,200,000 N | — |
| Basic dynamic load rating, axialCa | — | 1,169,064.748 lbf | — |
| Basic static load rating, axialC0a | — | 15,800,000 N | — |
| Basic static load rating, axialC0a | — | 3,552,158.273 lbf | — |
| Fatigue load limit, axialCua | — | 1,500,000 N | — |
| Fatigue load limit, axialCua | — | 337,230.216 lbf | — |
| Manufacturer Identity | |||
| Schaeffler Product Code | — | 396707 | — |
| Official Class Key | — | — | 080-000-000 |
| Base Type | — | 29456 | — |
| Old Designation | — | ["29456-E1"] | — |
| Gpsd Group | — | F03 | — |
| Product Line Id | — | 78 | — |
| X Life Marking | — | XL | — |
| SAP material number | — | 0390006300000 | — |
| Base product | — | 2305110302 | — |
| Bearing X designation | — | 29456-E1-XL | — |
| Mounting Manager ID | — | 29456-E1-XL | — |
| Mounting dimensions | |||
| Minimum diameter shaft shoulderda min | — | 395 mm | — |
| Minimum diameter shaft shoulderda min | — | 15.551 in | — |
| Maximum diameter of housing shoulderDa max | — | 446 mm | — |
| Maximum diameter of housing shoulderDa max | — | 17.559 in | — |
| Minimum bore diameter housingDb min | — | 530 mm | — |
| Minimum bore diameter housingDb min | — | 20.866 in | — |
| Maximum distance sleevedb max | — | 320 mm | — |
| Maximum distance sleevedb max | — | 12.598 in | — |
| Maximum champfer diameter of distance sleevedb1 max | — | 302 mm | — |
| Maximum champfer diameter of distance sleevedb1 max | — | 11.89 in | — |
| Maximum recess radiusra max | — | 5 mm | — |
| Maximum recess radiusra max | — | 0.197 in | — |
| Angle of champfer of the distance sleeve | — | 30 ° | — |
| Performance | |||
| SKF performance class | SKF Explorer | — | — |
| Product characteristics | |||
| Heat treatment | — | Standard | — |
| Locating feature, housing washer | None | Without | — |
| Handling thread holes | — | Without | — |
| Constricted width and inclination variation | — | Standard | — |
| Test certificate | — | Without | — |
| Product identity | |||
| Official product category | Spherical roller thrust bearings | — | — |
| Official taxonomy path | /products/rolling-bearings/roller-bearings/spherical-roller-thrust-bearings | — | — |
| Structure group ID | BHS_001 | — | — |
| Available from SKF | Yes | — | — |
| Remanufacturable | Yes | — | — |
| Product Identity | |||
| Construction | — | Axial spherical roller bearing 294..-E1-XL, no flanging ring | — |
| Short Description | — | Axial spherical roller bearing | — |
| Properties | |||
| Bore type | Cylindrical | — | — |
| Tolerance class | Normal | — | — |
| Candidate for remanufacturing | Yes | — | — |
| Indicative carbon footprint for new product | 462.0 kg CO 2 e | — | — |
| Indicative carbon footprint for remanufactured product | 154.0 kg CO 2 e | — | — |
| Technical Data | |||
| d | — | — | 520 mm |
| T | — | — | 145 mm |
| R(Min.) | — | — | 6 mm |
| Basic Load Ratings Ca | — | — | 4560 kN |
| Bore Diameter (D) | — | 280 mm | — |
| Basic Load Ratings C0A | — | — | 13600 kN |
| Outside Diameter (D) | — | 520 mm | — |
| Fatigue Load Limit : Cu | — | — | 907 kN |
| Height (T) | — | 145 mm | — |
| Limiting Speeds(Oil Lub.) | — | — | 550 min-1 |
| Basic Dynamic Load Rating, Axial (Ca) | — | 5,200,000 N | — |
| D1 | — | — | 387 mm |
| Basic Static Load Rating, Axial (C0A) | — | 15,800,000 N | — |
| Operating Temperature Min. (Tmin) | — | -30 °C | — |
| B | — | — | 52 mm |
| Limiting Speed (Ng) | — | 1,230 1/min | — |
| B1 | — | — | 140 mm |
| Operating Temperature Max. (Tmax) | — | 200 °C | — |
| C | — | — | 68 mm |
| Reference Speed (Nϑr) | — | 600 1/min | — |
| A | — | — | 166 mm |
| Minimum Diameter Of Housing Shoulder (Db Min) | — | 530 mm | — |
| Da(Min.) | — | — | 390 mm |
| Bore Diameter Housing Washer (D1) | — | 372 mm | — |
| Da(Max.) | — | — | 440 mm |
| Height Of The Housing Washer (T1) | — | 70 mm | — |
| Ra(Max.) | — | — | 5 mm |
| Rip Diameter Shaft Washer (D1) | — | 473.1 mm | — |
| Mass(Refer.) | — | — | 137 kg |
| Angle Of Champfer Of The Distance Sleeve (Angle Of Cha) | — | 30 ° | — |
| Height Of The Shaft Washer (T3) | — | 95 mm | — |
| Distance Shaft Washer Cage (T5) | — | 130.5 mm | — |
| Maximum Champfer Diameter Of Distance Sleeve (Db1 Max) | — | 302 mm | — |
| Minimum Diameter Shaft Shoulder (Da Min) | — | 395 mm | — |
| Distance Of The Center Point (A) | — | 166 mm | — |
| Maximum Diameter Of Housing Shoulder (Da Max) | — | 446 mm | — |
| Maximum Distance Sleeve (Db Max) | — | 320 mm | — |
| Minimum Chamfer Dimension (Rmin) | — | 6 mm | — |
| Maximum Fillet Radius (Ra Max) | — | 5 mm | — |
| Fatigue Load Limit, Axial (Cua) | — | 1,500,000 N | — |
| Temperature range | |||
| Operating temperature min.Tmin | — | -30 °C | — |
| Operating temperature min.Tmin | — | -22 °F | — |
| Operating temperature max.Tmax | — | 200 °C | — |
| Operating temperature max.Tmax | — | 392 °F | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.