Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions differ
“29452” across 3 loaded brands
The base designation is shared, but the loaded boundary dimensions do not agree. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | SKF29452 E260 × 480 × mm | FAG29452-E1-XL260 × 480 × 132 mm | KOYO29452R260 × 480 × 48 mm |
|---|---|---|---|
| Comparable specifications | |||
| Brand | SKF | FAG | KOYO |
| Designation | 29452 E | 29452-E1-XL | 29452R |
| Product family | Spherical roller thrust bearings | — | — |
| Detailed type | Spherical roller thrust bearing with stamped steel cage | Axial spherical roller bearings | Axial spherical roller bearings |
| Series | — | 29452 | — |
| Bore diameterd | 260 mm | 260 mm | 260 mm |
| Outside diameterD | 480 mm | 480 mm | 480 mm |
| WidthB | — | 132 mm | 48 mm |
| HeightH | 132 mm | — | — |
| Basic dynamic load ratingC | 4050 kN | — | — |
| Basic static load ratingC0 | 12900 kN | — | — |
| Fatigue load limitPu | 1080 kN | — | 764 kN |
| Reference speednref | 750 r/min | 660 r/min | — |
| Limiting speednG | 1300 r/min | 1350 r/min | 650 r/min |
| Mass≈m | 95.9 kg | 94.56 kg | 110 kg |
| Cage | Sheet metal | JP — Sheet metal cage | — |
| Minimum operating temperatureTmin | — | -30 °C | — |
| Maximum operating temperatureTmax | — | 200 °C | — |
| Capabilities & suitability | |||
| Radial load capacity | — | Yes | — |
| Axial load capacity in one direction | — | Yes | — |
| Suitable for grease lubrication | — | Yes | — |
| Suitable for oil lubrication | — | Yes | — |
| Unsealed design | — | Yes | — |
| Largebearing | — | Yes | — |
| Staticangularerrorandmisalignment | — | Yes | — |
| Dynamicangularerrorandmisalignment | — | Yes | — |
| Classification | |||
| Official Category Path | — | — | Spherical thrust roller bearings |
| Official Classification 1 | — | — | Spherical thrust roller bearings |
| Dimensions | |||
| Bore diameter housing washerD1 | — | 346 mm | — |
| Bore diameter housing washerD1 | — | 13.622 in | — |
| Rip diameter shaft washerd1 | — | 435 mm | — |
| Rip diameter shaft washerd1 | — | 17.126 in | — |
| Minimum chamfer dimensionrmin | — | 6 mm | — |
| Minimum chamfer dimensionrmin | — | 0.236 in | — |
| Height of the housing washerT1 | — | 63 mm | — |
| Height of the housing washerT1 | — | 2.48 in | — |
| Height of the shaft washerT3 | — | 86 mm | — |
| Height of the shaft washerT3 | — | 3.386 in | — |
| Distance shaft washer - cageT5 | — | 118.9 mm | — |
| Distance shaft washer - cageT5 | — | 4.681 in | — |
| Distance of the center pointA | — | 154 mm | — |
| Distance of the center pointA | — | 6.063 in | — |
| Engineering — Abutment dimensions | |||
| Diameter of shaft abutmentd a | min. 365 mm | — | — |
| Abutment diameter of spacer ringd b1 | max. 278 mm | — | — |
| Outside diameter of spacer ringd b2 | max. 296 mm | — | — |
| Diameter of housing abutmentD a | max. 412 mm | — | — |
| Fillet radiusr a | max. 5 mm | — | — |
| Engineering — Calculation data | |||
| Minimum axial load factorA | 16 | — | — |
| Engineering — Dimensions | |||
| Outside diameter of shaft washer end side faced 1 | ≈ 427 mm | — | — |
| Shoulder diameter outer ringD 1 | ≈ 346 mm | — | — |
| Width shaft washer or length of shaft washer bore diameter that fits on shaft (bearings with a stamped steel cage)B | 86 mm | — | — |
| Height shaft washer + cageB 1 | 119 mm | — | — |
| Height housing washerC | 63 mm | — | — |
| Distance from shaft washer end side face to pressure points | 154 mm | — | — |
| Chamfer dimension shaft washerr 1,2 | min. 6 mm | — | — |
| Logistics | |||
| Product net weight | 95.9 kg | — | — |
| eClass code | 23-05-09-11 | — | — |
| UNSPSC code | 31171507 | — | — |
| Main Dimensions & Performance Data | |||
| Basic dynamic load rating, axialCa | — | 4,400,000 N | — |
| Basic dynamic load rating, axialCa | — | 989,208.633 lbf | — |
| Basic static load rating, axialC0a | — | 13,200,000 N | — |
| Basic static load rating, axialC0a | — | 2,967,625.899 lbf | — |
| Fatigue load limit, axialCua | — | 1,310,000 N | — |
| Fatigue load limit, axialCua | — | 294,514.388 lbf | — |
| Manufacturer Identity | |||
| Schaeffler Product Code | — | 396704 | — |
| Official Class Key | — | — | 080-000-000 |
| Base Type | — | 29452 | — |
| Old Designation | — | ["29452-E1"] | — |
| Gpsd Group | — | F03 | — |
| Product Line Id | — | 78 | — |
| X Life Marking | — | XL | — |
| SAP material number | — | 0390006130000 | — |
| Base product | — | 2305110302 | — |
| Bearing X designation | — | 29452-E1-XL | — |
| Mounting Manager ID | — | 29452-E1-XL | — |
| Mounting dimensions | |||
| Minimum diameter shaft shoulderda min | — | 365 mm | — |
| Minimum diameter shaft shoulderda min | — | 14.37 in | — |
| Maximum diameter of housing shoulderDa max | — | 419 mm | — |
| Maximum diameter of housing shoulderDa max | — | 16.496 in | — |
| Minimum bore diameter housingDb min | — | 488 mm | — |
| Minimum bore diameter housingDb min | — | 19.213 in | — |
| Maximum distance sleevedb max | — | 296 mm | — |
| Maximum distance sleevedb max | — | 11.654 in | — |
| Maximum champfer diameter of distance sleevedb1 max | — | 280 mm | — |
| Maximum champfer diameter of distance sleevedb1 max | — | 11.024 in | — |
| Maximum recess radiusra max | — | 5 mm | — |
| Maximum recess radiusra max | — | 0.197 in | — |
| Angle of champfer of the distance sleeve | — | 30 ° | — |
| Performance | |||
| SKF performance class | SKF Explorer | — | — |
| Product characteristics | |||
| Heat treatment | — | Standard | — |
| Locating feature, housing washer | None | Without | — |
| Handling thread holes | — | Without | — |
| Constricted width and inclination variation | — | Standard | — |
| Test certificate | — | Without | — |
| Product identity | |||
| Official product category | Spherical roller thrust bearings | — | — |
| Official taxonomy path | /products/rolling-bearings/roller-bearings/spherical-roller-thrust-bearings | — | — |
| Structure group ID | BHS_001 | — | — |
| Available from SKF | Yes | — | — |
| Remanufacturable | Yes | — | — |
| Product Identity | |||
| Construction | — | Axial spherical roller bearing 294..-E1-XL, no flanging ring | — |
| Short Description | — | Axial spherical roller bearing | — |
| Properties | |||
| Bore type | Cylindrical | — | — |
| Tolerance class | Normal | — | — |
| Candidate for remanufacturing | Yes | — | — |
| Indicative carbon footprint for new product | 355.0 kg CO 2 e | — | — |
| Indicative carbon footprint for remanufactured product | 118.0 kg CO 2 e | — | — |
| Technical Data | |||
| d | — | — | 480 mm |
| T | — | — | 132 mm |
| R(Min.) | — | — | 6 mm |
| Basic Load Ratings Ca | — | — | 3760 kN |
| Bore Diameter (D) | — | 260 mm | — |
| Basic Load Ratings C0A | — | — | 11100 kN |
| Outside Diameter (D) | — | 480 mm | — |
| Fatigue Load Limit : Cu | — | — | 764 kN |
| Height (T) | — | 132 mm | — |
| Limiting Speeds(Oil Lub.) | — | — | 650 min-1 |
| Basic Dynamic Load Rating, Axial (Ca) | — | 4,400,000 N | — |
| D1 | — | — | 357 mm |
| Basic Static Load Rating, Axial (C0A) | — | 13,200,000 N | — |
| Operating Temperature Min. (Tmin) | — | -30 °C | — |
| B | — | — | 48 mm |
| Limiting Speed (Ng) | — | 1,350 1/min | — |
| B1 | — | — | 127 mm |
| Operating Temperature Max. (Tmax) | — | 200 °C | — |
| C | — | — | 64 mm |
| Reference Speed (Nϑr) | — | 660 1/min | — |
| A | — | — | 154 mm |
| Minimum Diameter Of Housing Shoulder (Db Min) | — | 488 mm | — |
| Da(Min.) | — | — | 360 mm |
| Bore Diameter Housing Washer (D1) | — | 346 mm | — |
| Da(Max.) | — | — | 405 mm |
| Height Of The Housing Washer (T1) | — | 63 mm | — |
| Ra(Max.) | — | — | 5 mm |
| Rip Diameter Shaft Washer (D1) | — | 435 mm | — |
| Mass(Refer.) | — | — | 110 kg |
| Angle Of Champfer Of The Distance Sleeve (Angle Of Cha) | — | 30 ° | — |
| Height Of The Shaft Washer (T3) | — | 86 mm | — |
| Distance Shaft Washer Cage (T5) | — | 118.9 mm | — |
| Maximum Champfer Diameter Of Distance Sleeve (Db1 Max) | — | 280 mm | — |
| Minimum Diameter Shaft Shoulder (Da Min) | — | 365 mm | — |
| Distance Of The Center Point (A) | — | 154 mm | — |
| Maximum Diameter Of Housing Shoulder (Da Max) | — | 419 mm | — |
| Maximum Distance Sleeve (Db Max) | — | 296 mm | — |
| Minimum Chamfer Dimension (Rmin) | — | 6 mm | — |
| Maximum Fillet Radius (Ra Max) | — | 5 mm | — |
| Fatigue Load Limit, Axial (Cua) | — | 1,310,000 N | — |
| Temperature range | |||
| Operating temperature min.Tmin | — | -30 °C | — |
| Operating temperature min.Tmin | — | -22 °F | — |
| Operating temperature max.Tmax | — | 200 °C | — |
| Operating temperature max.Tmax | — | 392 °F | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.