Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Cross Reference centre · Interchange verification checklist · Understand suffix differences
You entered 29444-E1-XL-N1. This table explores the base group 29444; it does not preserve or approve every requested suffix. Search your complete marking first →
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions differ
“29444” across 3 loaded brands
The base designation is shared, but the loaded boundary dimensions do not agree. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | SKF29444 E220 × 420 × mm | FAG29444-E1-XL220 × 420 × 122 mm | KOYO29444R220 × 420 × 43 mm |
|---|---|---|---|
| Comparable specifications | |||
| Brand | SKF | FAG | KOYO |
| Designation | 29444 E | 29444-E1-XL | 29444R |
| Product family | Spherical roller thrust bearings | — | — |
| Detailed type | Spherical roller thrust bearing with stamped steel cage | Axial spherical roller bearings | Axial spherical roller bearings |
| Series | — | 29444 | — |
| Bore diameterd | 220 mm | 220 mm | 220 mm |
| Outside diameterD | 420 mm | 420 mm | 420 mm |
| WidthB | — | 122 mm | 43 mm |
| HeightH | 122 mm | — | — |
| Basic dynamic load ratingC | 3350 kN | — | — |
| Basic static load ratingC0 | 9650 kN | — | — |
| Fatigue load limitPu | 900 kN | — | 619 kN |
| Reference speednref | 850 r/min | 790 r/min | — |
| Limiting speednG | 1500 r/min | 1560 r/min | 750 r/min |
| Mass≈m | 69.2 kg | 68.3 kg | 74.2 kg |
| Cage | Sheet metal | JP — Sheet metal cage | — |
| Minimum operating temperatureTmin | — | -30 °C | — |
| Maximum operating temperatureTmax | — | 200 °C | — |
| Capabilities & suitability | |||
| Radial load capacity | — | Yes | — |
| Axial load capacity in one direction | — | Yes | — |
| Suitable for grease lubrication | — | Yes | — |
| Suitable for oil lubrication | — | Yes | — |
| Unsealed design | — | Yes | — |
| Largebearing | — | Yes | — |
| Staticangularerrorandmisalignment | — | Yes | — |
| Dynamicangularerrorandmisalignment | — | Yes | — |
| Classification | |||
| Official Category Path | — | — | Spherical thrust roller bearings |
| Official Classification 1 | — | — | Spherical thrust roller bearings |
| Dimensions | |||
| Bore diameter housing washerD1 | — | 300 mm | — |
| Bore diameter housing washerD1 | — | 11.811 in | — |
| Rip diameter shaft washerd1 | — | 379.8 mm | — |
| Rip diameter shaft washerd1 | — | 14.953 in | — |
| Minimum chamfer dimensionrmin | — | 6 mm | — |
| Minimum chamfer dimensionrmin | — | 0.236 in | — |
| Height of the housing washerT1 | — | 58.5 mm | — |
| Height of the housing washerT1 | — | 2.303 in | — |
| Height of the shaft washerT3 | — | 77 mm | — |
| Height of the shaft washerT3 | — | 3.031 in | — |
| Distance shaft washer - cageT5 | — | 107.5 mm | — |
| Distance shaft washer - cageT5 | — | 4.232 in | — |
| Distance of the center pointA | — | 132 mm | — |
| Distance of the center pointA | — | 5.197 in | — |
| Engineering — Abutment dimensions | |||
| Diameter of shaft abutmentd a | min. 315 mm | — | — |
| Abutment diameter of spacer ringd b1 | max. 238 mm | — | — |
| Outside diameter of spacer ringd b2 | max. 254 mm | — | — |
| Diameter of housing abutmentD a | max. 358 mm | — | — |
| Fillet radiusr a | max. 5 mm | — | — |
| Engineering — Calculation data | |||
| Minimum axial load factorA | 8.8 | — | — |
| Engineering — Dimensions | |||
| Outside diameter of shaft washer end side faced 1 | ≈ 371 mm | — | — |
| Shoulder diameter outer ringD 1 | ≈ 300 mm | — | — |
| Width shaft washer or length of shaft washer bore diameter that fits on shaft (bearings with a stamped steel cage)B | 77 mm | — | — |
| Height shaft washer + cageB 1 | 107.4 mm | — | — |
| Height housing washerC | 58.5 mm | — | — |
| Distance from shaft washer end side face to pressure points | 132 mm | — | — |
| Chamfer dimension shaft washerr 1,2 | min. 6 mm | — | — |
| Logistics | |||
| Product net weight | 69.2 kg | — | — |
| eClass code | 23-05-11-03 | — | — |
| UNSPSC code | 31171507 | — | — |
| Main Dimensions & Performance Data | |||
| Basic dynamic load rating, axialCa | — | 3,500,000 N | — |
| Basic dynamic load rating, axialCa | — | 786,870.504 lbf | — |
| Basic static load rating, axialC0a | — | 10,000,000 N | — |
| Basic static load rating, axialC0a | — | 2,248,201.439 lbf | — |
| Fatigue load limit, axialCua | — | 1,020,000 N | — |
| Fatigue load limit, axialCua | — | 229,316.547 lbf | — |
| Manufacturer Identity | |||
| Schaeffler Product Code | — | 396698 | — |
| Official Class Key | — | — | 080-000-000 |
| Base Type | — | 29444 | — |
| Old Designation | — | ["29444-E1"] | — |
| Gpsd Group | — | F03 | — |
| Product Line Id | — | 78 | — |
| X Life Marking | — | XL | — |
| SAP material number | — | 0390005750000 | — |
| Base product | — | 2305110302 | — |
| Bearing X designation | — | 29444-E1-XL | — |
| Mounting Manager ID | — | 29444-E1-XL | — |
| Mounting dimensions | |||
| Minimum diameter shaft shoulderda min | — | 315 mm | — |
| Minimum diameter shaft shoulderda min | — | 12.402 in | — |
| Maximum diameter of housing shoulderDa max | — | 360 mm | — |
| Maximum diameter of housing shoulderDa max | — | 14.173 in | — |
| Minimum bore diameter housingDb min | — | 428 mm | — |
| Minimum bore diameter housingDb min | — | 16.85 in | — |
| Maximum distance sleevedb max | — | 254 mm | — |
| Maximum distance sleevedb max | — | 10 in | — |
| Maximum champfer diameter of distance sleevedb1 max | — | 241 mm | — |
| Maximum champfer diameter of distance sleevedb1 max | — | 9.488 in | — |
| Maximum recess radiusra max | — | 5 mm | — |
| Maximum recess radiusra max | — | 0.197 in | — |
| Angle of champfer of the distance sleeve | — | 30 ° | — |
| Performance | |||
| SKF performance class | SKF Explorer | — | — |
| Product characteristics | |||
| Heat treatment | — | Standard | — |
| Locating feature, housing washer | None | Without | — |
| Handling thread holes | — | Without | — |
| Constricted width and inclination variation | — | Standard | — |
| Test certificate | — | Without | — |
| Product identity | |||
| Official product category | Spherical roller thrust bearings | — | — |
| Official taxonomy path | /products/rolling-bearings/roller-bearings/spherical-roller-thrust-bearings | — | — |
| Structure group ID | BHS_001 | — | — |
| Available from SKF | Yes | — | — |
| Remanufacturable | Yes | — | — |
| Product Identity | |||
| Construction | — | Axial spherical roller bearing 294..-E1-XL, no flanging ring | — |
| Short Description | — | Axial spherical roller bearing | — |
| Properties | |||
| Bore type | Cylindrical | — | — |
| Tolerance class | Normal | — | — |
| Candidate for remanufacturing | Yes | — | — |
| Indicative carbon footprint for new product | 256.0 kg CO 2 e | — | — |
| Indicative carbon footprint for remanufactured product | 85.1 kg CO 2 e | — | — |
| Technical Data | |||
| d | — | — | 420 mm |
| T | — | — | 122 mm |
| R(Min.) | — | — | 6 mm |
| Basic Load Ratings Ca | — | — | 3160 kN |
| Bore Diameter (D) | — | 220 mm | — |
| Basic Load Ratings C0A | — | — | 8990 kN |
| Outside Diameter (D) | — | 420 mm | — |
| Fatigue Load Limit : Cu | — | — | 619 kN |
| Height (T) | — | 122 mm | — |
| Limiting Speeds(Oil Lub.) | — | — | 750 min-1 |
| Basic Dynamic Load Rating, Axial (Ca) | — | 3,500,000 N | — |
| D1 | — | — | 308 mm |
| Basic Static Load Rating, Axial (C0A) | — | 10,000,000 N | — |
| Operating Temperature Min. (Tmin) | — | -30 °C | — |
| B | — | — | 43 mm |
| Limiting Speed (Ng) | — | 1,560 1/min | — |
| B1 | — | — | 117 mm |
| Operating Temperature Max. (Tmax) | — | 200 °C | — |
| C | — | — | 58 mm |
| Reference Speed (Nϑr) | — | 790 1/min | — |
| A | — | — | 132 mm |
| Minimum Diameter Of Housing Shoulder (Db Min) | — | 428 mm | — |
| Da(Min.) | — | — | 310 mm |
| Bore Diameter Housing Washer (D1) | — | 300 mm | — |
| Da(Max.) | — | — | 355 mm |
| Height Of The Housing Washer (T1) | — | 58.5 mm | — |
| Ra(Max.) | — | — | 5 mm |
| Rip Diameter Shaft Washer (D1) | — | 379.8 mm | — |
| Mass(Refer.) | — | — | 74.2 kg |
| Angle Of Champfer Of The Distance Sleeve (Angle Of Cha) | — | 30 ° | — |
| Height Of The Shaft Washer (T3) | — | 77 mm | — |
| Distance Shaft Washer Cage (T5) | — | 107.5 mm | — |
| Maximum Champfer Diameter Of Distance Sleeve (Db1 Max) | — | 241 mm | — |
| Minimum Diameter Shaft Shoulder (Da Min) | — | 315 mm | — |
| Distance Of The Center Point (A) | — | 132 mm | — |
| Maximum Diameter Of Housing Shoulder (Da Max) | — | 360 mm | — |
| Maximum Distance Sleeve (Db Max) | — | 254 mm | — |
| Minimum Chamfer Dimension (Rmin) | — | 6 mm | — |
| Maximum Fillet Radius (Ra Max) | — | 5 mm | — |
| Fatigue Load Limit, Axial (Cua) | — | 1,020,000 N | — |
| Temperature range | |||
| Operating temperature min.Tmin | — | -30 °C | — |
| Operating temperature min.Tmin | — | -22 °F | — |
| Operating temperature max.Tmax | — | 200 °C | — |
| Operating temperature max.Tmax | — | 392 °F | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.