Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Cross Reference centre · Interchange verification checklist · Understand suffix differences
You entered 29440-E. This table explores the base group 29440; it does not preserve or approve every requested suffix. Search your complete marking first →
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions differ
“29440” across 3 loaded brands
The base designation is shared, but the loaded boundary dimensions do not agree. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | SKF29440 E200 × 400 × mm | FAG29440-E1-XL200 × 400 × 122 mm | KOYO29440R200 × 400 × 43 mm |
|---|---|---|---|
| Comparable specifications | |||
| Brand | SKF | FAG | KOYO |
| Designation | 29440 E | 29440-E1-XL | 29440R |
| Product family | Spherical roller thrust bearings | — | — |
| Detailed type | Spherical roller thrust bearing with stamped steel cage | Axial spherical roller bearings | Axial spherical roller bearings |
| Series | — | 29440 | — |
| Bore diameterd | 200 mm | 200 mm | 200 mm |
| Outside diameterD | 400 mm | 400 mm | 400 mm |
| WidthB | — | 122 mm | 43 mm |
| HeightH | 122 mm | — | — |
| Basic dynamic load ratingC | 3200 kN | — | — |
| Basic static load ratingC0 | 9000 kN | — | — |
| Fatigue load limitPu | 850 kN | — | 575 kN |
| Reference speednref | 850 r/min | 860 r/min | — |
| Limiting speednG | 1600 r/min | 1670 r/min | 800 r/min |
| Mass≈m | 63.9 kg | 66.06 kg | 73 kg |
| Cage | Sheet metal | JP — Sheet metal cage | — |
| Minimum operating temperatureTmin | — | -30 °C | — |
| Maximum operating temperatureTmax | — | 200 °C | — |
| Capabilities & suitability | |||
| Radial load capacity | — | Yes | — |
| Axial load capacity in one direction | — | Yes | — |
| Suitable for grease lubrication | — | Yes | — |
| Suitable for oil lubrication | — | Yes | — |
| Unsealed design | — | Yes | — |
| Largebearing | — | Yes | — |
| Staticangularerrorandmisalignment | — | Yes | — |
| Dynamicangularerrorandmisalignment | — | Yes | — |
| Classification | |||
| Official Category Path | — | — | Spherical thrust roller bearings |
| Official Classification 1 | — | — | Spherical thrust roller bearings |
| Dimensions | |||
| Bore diameter housing washerD1 | — | 277.5 mm | — |
| Bore diameter housing washerD1 | — | 10.925 in | — |
| Rip diameter shaft washerd1 | — | 360 mm | — |
| Rip diameter shaft washerd1 | — | 14.173 in | — |
| Minimum chamfer dimensionrmin | — | 5 mm | — |
| Minimum chamfer dimensionrmin | — | 0.197 in | — |
| Height of the housing washerT1 | — | 59.4 mm | — |
| Height of the housing washerT1 | — | 2.339 in | — |
| Height of the shaft washerT3 | — | 77 mm | — |
| Height of the shaft washerT3 | — | 3.031 in | — |
| Distance shaft washer - cageT5 | — | 106.9 mm | — |
| Distance shaft washer - cageT5 | — | 4.209 in | — |
| Distance of the center pointA | — | 122 mm | — |
| Distance of the center pointA | — | 4.803 in | — |
| Engineering — Abutment dimensions | |||
| Diameter of shaft abutmentd a | min. 295 mm | — | — |
| Abutment diameter of spacer ringd b1 | max. 217.5 mm | — | — |
| Outside diameter of spacer ringd b2 | max. 234 mm | — | — |
| Diameter of housing abutmentD a | max. 337 mm | — | — |
| Fillet radiusr a | max. 4 mm | — | — |
| Engineering — Calculation data | |||
| Minimum axial load factorA | 7.7 | — | — |
| Engineering — Dimensions | |||
| Outside diameter of shaft washer end side faced 1 | ≈ 350 mm | — | — |
| Shoulder diameter outer ringD 1 | ≈ 278 mm | — | — |
| Width shaft washer or length of shaft washer bore diameter that fits on shaft (bearings with a stamped steel cage)B | 77 mm | — | — |
| Height shaft washer + cageB 1 | 107.1 mm | — | — |
| Height housing washerC | 59.4 mm | — | — |
| Distance from shaft washer end side face to pressure points | 122 mm | — | — |
| Chamfer dimension shaft washerr 1,2 | min. 5 mm | — | — |
| Logistics | |||
| Product net weight | 63.9 kg | — | — |
| eClass code | 23-05-11-03 | — | — |
| UNSPSC code | 31171507 | — | — |
| Main Dimensions & Performance Data | |||
| Basic dynamic load rating, axialCa | — | 3,450,000 N | — |
| Basic dynamic load rating, axialCa | — | 775,629.496 lbf | — |
| Basic static load rating, axialC0a | — | 9,500,000 N | — |
| Basic static load rating, axialC0a | — | 2,135,791.367 lbf | — |
| Fatigue load limit, axialCua | — | 950,000 N | — |
| Fatigue load limit, axialCua | — | 213,579.137 lbf | — |
| Manufacturer Identity | |||
| Schaeffler Product Code | — | 396695 | — |
| Official Class Key | — | — | 080-000-000 |
| Base Type | — | 29440 | — |
| Old Designation | — | ["29440-E1"] | — |
| Gpsd Group | — | F03 | — |
| Product Line Id | — | 78 | — |
| X Life Marking | — | XL | — |
| SAP material number | — | 0390005590000 | — |
| Base product | — | 2305110302 | — |
| Bearing X designation | — | 29440-E1-XL | — |
| Mounting Manager ID | — | 29440-E1-XL | — |
| Mounting dimensions | |||
| Minimum diameter shaft shoulderda min | — | 295 mm | — |
| Minimum diameter shaft shoulderda min | — | 11.614 in | — |
| Maximum diameter of housing shoulderDa max | — | 338 mm | — |
| Maximum diameter of housing shoulderDa max | — | 13.307 in | — |
| Minimum bore diameter housingDb min | — | 406 mm | — |
| Minimum bore diameter housingDb min | — | 15.984 in | — |
| Maximum distance sleevedb max | — | 234 mm | — |
| Maximum distance sleevedb max | — | 9.213 in | — |
| Maximum champfer diameter of distance sleevedb1 max | — | 220 mm | — |
| Maximum champfer diameter of distance sleevedb1 max | — | 8.661 in | — |
| Maximum recess radiusra max | — | 4 mm | — |
| Maximum recess radiusra max | — | 0.157 in | — |
| Angle of champfer of the distance sleeve | — | 30 ° | — |
| Performance | |||
| SKF performance class | SKF Explorer | — | — |
| Product characteristics | |||
| Heat treatment | — | Standard | — |
| Locating feature, housing washer | None | Without | — |
| Handling thread holes | — | Without | — |
| Constricted width and inclination variation | — | Standard | — |
| Test certificate | — | Without | — |
| Product identity | |||
| Official product category | Spherical roller thrust bearings | — | — |
| Official taxonomy path | /products/rolling-bearings/roller-bearings/spherical-roller-thrust-bearings | — | — |
| Structure group ID | BHS_001 | — | — |
| Available from SKF | Yes | — | — |
| Remanufacturable | Yes | — | — |
| Product Identity | |||
| Construction | — | Axial spherical roller bearing 294..-E1-XL, no flanging ring | — |
| Short Description | — | Axial spherical roller bearing | — |
| Properties | |||
| Bore type | Cylindrical | — | — |
| Tolerance class | Normal | — | — |
| Candidate for remanufacturing | Yes | — | — |
| Indicative carbon footprint for new product | 236.0 kg CO 2 e | — | — |
| Indicative carbon footprint for remanufactured product | 78.6 kg CO 2 e | — | — |
| Technical Data | |||
| d | — | — | 400 mm |
| T | — | — | 122 mm |
| R(Min.) | — | — | 5 mm |
| Basic Load Ratings Ca | — | — | 3060 kN |
| Bore Diameter (D) | — | 200 mm | — |
| Basic Load Ratings C0A | — | — | 8470 kN |
| Outside Diameter (D) | — | 400 mm | — |
| Fatigue Load Limit : Cu | — | — | 575 kN |
| Height (T) | — | 122 mm | — |
| Limiting Speeds(Oil Lub.) | — | — | 800 min-1 |
| Basic Dynamic Load Rating, Axial (Ca) | — | 3,450,000 N | — |
| D1 | — | — | 286 mm |
| Basic Static Load Rating, Axial (C0A) | — | 9,500,000 N | — |
| Operating Temperature Min. (Tmin) | — | -30 °C | — |
| B | — | — | 43 mm |
| Limiting Speed (Ng) | — | 1,670 1/min | — |
| B1 | — | — | 117 mm |
| Operating Temperature Max. (Tmax) | — | 200 °C | — |
| C | — | — | 59 mm |
| Reference Speed (Nϑr) | — | 860 1/min | — |
| A | — | — | 122 mm |
| Minimum Diameter Of Housing Shoulder (Db Min) | — | 406 mm | — |
| Da(Min.) | — | — | 290 mm |
| Bore Diameter Housing Washer (D1) | — | 277.5 mm | — |
| Da(Max.) | — | — | 335 mm |
| Height Of The Housing Washer (T1) | — | 59.4 mm | — |
| Ra(Max.) | — | — | 4 mm |
| Rip Diameter Shaft Washer (D1) | — | 360 mm | — |
| Mass(Refer.) | — | — | 73.0 kg |
| Angle Of Champfer Of The Distance Sleeve (Angle Of Cha) | — | 30 ° | — |
| Height Of The Shaft Washer (T3) | — | 77 mm | — |
| Distance Shaft Washer Cage (T5) | — | 106.9 mm | — |
| Maximum Champfer Diameter Of Distance Sleeve (Db1 Max) | — | 220 mm | — |
| Minimum Diameter Shaft Shoulder (Da Min) | — | 295 mm | — |
| Distance Of The Center Point (A) | — | 122 mm | — |
| Maximum Diameter Of Housing Shoulder (Da Max) | — | 338 mm | — |
| Maximum Distance Sleeve (Db Max) | — | 234 mm | — |
| Minimum Chamfer Dimension (Rmin) | — | 5 mm | — |
| Maximum Fillet Radius (Ra Max) | — | 4 mm | — |
| Fatigue Load Limit, Axial (Cua) | — | 950,000 N | — |
| Temperature range | |||
| Operating temperature min.Tmin | — | -30 °C | — |
| Operating temperature min.Tmin | — | -22 °F | — |
| Operating temperature max.Tmax | — | 200 °C | — |
| Operating temperature max.Tmax | — | 392 °F | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.