Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Cross Reference centre · Interchange verification checklist · Understand suffix differences
You entered 29434-E. This table explores the base group 29434; it does not preserve or approve every requested suffix. Search your complete marking first →
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions differ
“29434” across 3 loaded brands
The base designation is shared, but the loaded boundary dimensions do not agree. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | SKF29434 E170 × 340 × mm | FAG29434-E1-XL170 × 340 × 103 mm | KOYO29434R170 × 340 × 37 mm |
|---|---|---|---|
| Comparable specifications | |||
| Brand | SKF | FAG | KOYO |
| Designation | 29434 E | 29434-E1-XL | 29434R |
| Product family | Spherical roller thrust bearings | — | — |
| Detailed type | Spherical roller thrust bearing with stamped steel cage | Axial spherical roller bearings | Axial spherical roller bearings |
| Series | — | 29434 | — |
| Bore diameterd | 170 mm | 170 mm | 170 mm |
| Outside diameterD | 340 mm | 340 mm | 340 mm |
| WidthB | — | 103 mm | 37 mm |
| HeightH | 103 mm | — | — |
| Basic dynamic load ratingC | 2360 kN | — | — |
| Basic static load ratingC0 | 6550 kN | — | — |
| Fatigue load limitPu | 640 kN | — | 389 kN |
| Reference speednref | 1100 r/min | 1020 r/min | — |
| Limiting speednG | 1900 r/min | 1990 r/min | 950 r/min |
| Mass≈m | 39.5 kg | 38.64 kg | 44 kg |
| Cage | Sheet metal | JP — Sheet metal cage | — |
| Minimum operating temperatureTmin | — | -30 °C | — |
| Maximum operating temperatureTmax | — | 200 °C | — |
| Capabilities & suitability | |||
| Radial load capacity | — | Yes | — |
| Axial load capacity in one direction | — | Yes | — |
| Suitable for grease lubrication | — | Yes | — |
| Suitable for oil lubrication | — | Yes | — |
| Unsealed design | — | Yes | — |
| Largebearing | — | Yes | — |
| Staticangularerrorandmisalignment | — | Yes | — |
| Dynamicangularerrorandmisalignment | — | Yes | — |
| Classification | |||
| Official Category Path | — | — | Spherical thrust roller bearings |
| Official Classification 1 | — | — | Spherical thrust roller bearings |
| Dimensions | |||
| Bore diameter housing washerD1 | — | 236 mm | — |
| Bore diameter housing washerD1 | — | 9.291 in | — |
| Rip diameter shaft washerd1 | — | 305 mm | — |
| Rip diameter shaft washerd1 | — | 12.008 in | — |
| Minimum chamfer dimensionrmin | — | 5 mm | — |
| Minimum chamfer dimensionrmin | — | 0.197 in | — |
| Height of the housing washerT1 | — | 50 mm | — |
| Height of the housing washerT1 | — | 1.969 in | — |
| Height of the shaft washerT3 | — | 65.5 mm | — |
| Height of the shaft washerT3 | — | 2.579 in | — |
| Distance shaft washer - cageT5 | — | 89.5 mm | — |
| Distance shaft washer - cageT5 | — | 3.524 in | — |
| Distance of the center pointA | — | 104 mm | — |
| Distance of the center pointA | — | 4.094 in | — |
| Engineering — Abutment dimensions | |||
| Diameter of shaft abutmentd a | min. 250 mm | — | — |
| Abutment diameter of spacer ringd b1 | max. 185 mm | — | — |
| Outside diameter of spacer ringd b2 | max. 199 mm | — | — |
| Diameter of housing abutmentD a | max. 286 mm | — | — |
| Fillet radiusr a | max. 4 mm | — | — |
| Engineering — Calculation data | |||
| Minimum axial load factorA | 4.1 | — | — |
| Engineering — Dimensions | |||
| Outside diameter of shaft washer end side faced 1 | ≈ 297 mm | — | — |
| Shoulder diameter outer ringD 1 | ≈ 236 mm | — | — |
| Width shaft washer or length of shaft washer bore diameter that fits on shaft (bearings with a stamped steel cage)B | 65.5 mm | — | — |
| Height shaft washer + cageB 1 | 91.2 mm | — | — |
| Height housing washerC | 50 mm | — | — |
| Distance from shaft washer end side face to pressure points | 104 mm | — | — |
| Chamfer dimension shaft washerr 1,2 | min. 5 mm | — | — |
| Logistics | |||
| Product net weight | 39.5 kg | — | — |
| eClass code | 23-05-11-03 | — | — |
| UNSPSC code | 31171507 | — | — |
| Main Dimensions & Performance Data | |||
| Basic dynamic load rating, axialCa | — | 2,550,000 N | — |
| Basic dynamic load rating, axialCa | — | 573,291.367 lbf | — |
| Basic static load rating, axialC0a | — | 6,900,000 N | — |
| Basic static load rating, axialC0a | — | 1,551,258.993 lbf | — |
| Fatigue load limit, axialCua | — | 700,000 N | — |
| Fatigue load limit, axialCua | — | 157,374.101 lbf | — |
| Manufacturer Identity | |||
| Schaeffler Product Code | — | 396686 | — |
| Official Class Key | — | — | 080-000-000 |
| Base Type | — | 29434 | — |
| Old Designation | — | ["29434-E1"] | — |
| Gpsd Group | — | F03 | — |
| Product Line Id | — | 78 | — |
| X Life Marking | — | XL | — |
| SAP material number | — | 0390005160000 | — |
| Base product | — | 2305110302 | — |
| Bearing X designation | — | 29434-E1-XL | — |
| Mounting Manager ID | — | 29434-E1-XL | — |
| Mounting dimensions | |||
| Minimum diameter shaft shoulderda min | — | 250 mm | — |
| Minimum diameter shaft shoulderda min | — | 9.843 in | — |
| Maximum diameter of housing shoulderDa max | — | 288 mm | — |
| Maximum diameter of housing shoulderDa max | — | 11.339 in | — |
| Minimum bore diameter housingDb min | — | 346 mm | — |
| Minimum bore diameter housingDb min | — | 13.622 in | — |
| Maximum distance sleevedb max | — | 199 mm | — |
| Maximum distance sleevedb max | — | 7.835 in | — |
| Maximum champfer diameter of distance sleevedb1 max | — | 186 mm | — |
| Maximum champfer diameter of distance sleevedb1 max | — | 7.323 in | — |
| Maximum recess radiusra max | — | 4 mm | — |
| Maximum recess radiusra max | — | 0.157 in | — |
| Angle of champfer of the distance sleeve | — | 30 ° | — |
| Performance | |||
| SKF performance class | SKF Explorer | — | — |
| Product characteristics | |||
| Heat treatment | — | Standard | — |
| Locating feature, housing washer | None | Without | — |
| Handling thread holes | — | Without | — |
| Constricted width and inclination variation | — | Standard | — |
| Test certificate | — | Without | — |
| Product identity | |||
| Official product category | Spherical roller thrust bearings | — | — |
| Official taxonomy path | /products/rolling-bearings/roller-bearings/spherical-roller-thrust-bearings | — | — |
| Structure group ID | BHS_001 | — | — |
| Available from SKF | Yes | — | — |
| Remanufacturable | Yes | — | — |
| Product Identity | |||
| Construction | — | Axial spherical roller bearing 294..-E1-XL, no flanging ring | — |
| Short Description | — | Axial spherical roller bearing | — |
| Properties | |||
| Bore type | Cylindrical | — | — |
| Tolerance class | Normal | — | — |
| Candidate for remanufacturing | Yes | — | — |
| Indicative carbon footprint for new product | 146.0 kg CO 2 e | — | — |
| Indicative carbon footprint for remanufactured product | 48.6 kg CO 2 e | — | — |
| Technical Data | |||
| d | — | — | 340 mm |
| T | — | — | 103 mm |
| R(Min.) | — | — | 5 mm |
| Basic Load Ratings Ca | — | — | 2120 kN |
| Bore Diameter (D) | — | 170 mm | — |
| Basic Load Ratings C0A | — | — | 5880 kN |
| Outside Diameter (D) | — | 340 mm | — |
| Fatigue Load Limit : Cu | — | — | 389 kN |
| Height (T) | — | 103 mm | — |
| Limiting Speeds(Oil Lub.) | — | — | 950 min-1 |
| Basic Dynamic Load Rating, Axial (Ca) | — | 2,550,000 N | — |
| D1 | — | — | 243 mm |
| Basic Static Load Rating, Axial (C0A) | — | 6,900,000 N | — |
| Operating Temperature Min. (Tmin) | — | -30 °C | — |
| B | — | — | 37 mm |
| Limiting Speed (Ng) | — | 1,990 1/min | — |
| B1 | — | — | 99 mm |
| Operating Temperature Max. (Tmax) | — | 200 °C | — |
| C | — | — | 50 mm |
| Reference Speed (Nϑr) | — | 1,020 1/min | — |
| A | — | — | 104 mm |
| Minimum Diameter Of Housing Shoulder (Db Min) | — | 346 mm | — |
| Da(Min.) | — | — | 245 mm |
| Bore Diameter Housing Washer (D1) | — | 236 mm | — |
| Da(Max.) | — | — | 285 mm |
| Height Of The Housing Washer (T1) | — | 50 mm | — |
| Ra(Max.) | — | — | 4 mm |
| Rip Diameter Shaft Washer (D1) | — | 305 mm | — |
| Mass(Refer.) | — | — | 44.0 kg |
| Angle Of Champfer Of The Distance Sleeve (Angle Of Cha) | — | 30 ° | — |
| Height Of The Shaft Washer (T3) | — | 65.5 mm | — |
| Distance Shaft Washer Cage (T5) | — | 89.5 mm | — |
| Maximum Champfer Diameter Of Distance Sleeve (Db1 Max) | — | 186 mm | — |
| Minimum Diameter Shaft Shoulder (Da Min) | — | 250 mm | — |
| Distance Of The Center Point (A) | — | 104 mm | — |
| Maximum Diameter Of Housing Shoulder (Da Max) | — | 288 mm | — |
| Maximum Distance Sleeve (Db Max) | — | 199 mm | — |
| Minimum Chamfer Dimension (Rmin) | — | 5 mm | — |
| Maximum Fillet Radius (Ra Max) | — | 4 mm | — |
| Fatigue Load Limit, Axial (Cua) | — | 700,000 N | — |
| Temperature range | |||
| Operating temperature min.Tmin | — | -30 °C | — |
| Operating temperature min.Tmin | — | -22 °F | — |
| Operating temperature max.Tmax | — | 200 °C | — |
| Operating temperature max.Tmax | — | 392 °F | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.