Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions differ
“29430” across 3 loaded brands
The base designation is shared, but the loaded boundary dimensions do not agree. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | SKF29430 E150 × 300 × mm | FAG29430-E1-XL150 × 300 × 90 mm | KOYO29430R150 × 300 × 32 mm |
|---|---|---|---|
| Comparable specifications | |||
| Brand | SKF | FAG | KOYO |
| Designation | 29430 E | 29430-E1-XL | 29430R |
| Product family | Spherical roller thrust bearings | — | — |
| Detailed type | Spherical roller thrust bearing with stamped steel cage | Axial spherical roller bearings | Axial spherical roller bearings |
| Series | — | 29430 | — |
| Bore diameterd | 150 mm | 150 mm | 150 mm |
| Outside diameterD | 300 mm | 300 mm | 300 mm |
| WidthB | — | 90 mm | 32 mm |
| HeightH | 90 mm | — | — |
| Basic dynamic load ratingC | 1860 kN | — | — |
| Basic static load ratingC0 | 5100 kN | — | — |
| Fatigue load limitPu | 520 kN | — | 334 kN |
| Reference speednref | 1200 r/min | 1180 r/min | — |
| Limiting speednG | 2200 r/min | 2290 r/min | 1100 r/min |
| Mass≈m | 27.1 kg | 26.54 kg | 29.6 kg |
| Cage | Sheet metal | JP — Sheet metal cage | — |
| Minimum operating temperatureTmin | — | -30 °C | — |
| Maximum operating temperatureTmax | — | 200 °C | — |
| Capabilities & suitability | |||
| Radial load capacity | — | Yes | — |
| Axial load capacity in one direction | — | Yes | — |
| Suitable for grease lubrication | — | Yes | — |
| Suitable for oil lubrication | — | Yes | — |
| Unsealed design | — | Yes | — |
| Staticangularerrorandmisalignment | — | Yes | — |
| Dynamicangularerrorandmisalignment | — | Yes | — |
| Classification | |||
| Official Category Path | — | — | Spherical thrust roller bearings |
| Official Classification 1 | — | — | Spherical thrust roller bearings |
| Dimensions | |||
| Bore diameter housing washerD1 | — | 207.5 mm | — |
| Bore diameter housing washerD1 | — | 8.169 in | — |
| Rip diameter shaft washerd1 | — | 267.4 mm | — |
| Rip diameter shaft washerd1 | — | 10.528 in | — |
| Minimum chamfer dimensionrmin | — | 4 mm | — |
| Minimum chamfer dimensionrmin | — | 0.157 in | — |
| Height of the housing washerT1 | — | 43.4 mm | — |
| Height of the housing washerT1 | — | 1.709 in | — |
| Height of the shaft washerT3 | — | 58 mm | — |
| Height of the shaft washerT3 | — | 2.283 in | — |
| Distance shaft washer - cageT5 | — | 80.5 mm | — |
| Distance shaft washer - cageT5 | — | 3.169 in | — |
| Distance of the center pointA | — | 92 mm | — |
| Distance of the center pointA | — | 3.622 in | — |
| Engineering — Abutment dimensions | |||
| Diameter of shaft abutmentd a | min. 220 mm | — | — |
| Abutment diameter of spacer ringd b1 | max. 163 mm | — | — |
| Outside diameter of spacer ringd b2 | max. 175 mm | — | — |
| Diameter of housing abutmentD a | max. 253 mm | — | — |
| Fillet radiusr a | max. 3 mm | — | — |
| Engineering — Calculation data | |||
| Minimum axial load factorA | 2.5 | — | — |
| Engineering — Dimensions | |||
| Outside diameter of shaft washer end side faced 1 | ≈ 262 mm | — | — |
| Shoulder diameter outer ringD 1 | ≈ 208 mm | — | — |
| Width shaft washer or length of shaft washer bore diameter that fits on shaft (bearings with a stamped steel cage)B | 58 mm | — | — |
| Height shaft washer + cageB 1 | 80.8 mm | — | — |
| Height housing washerC | 43.4 mm | — | — |
| Distance from shaft washer end side face to pressure points | 92 mm | — | — |
| Chamfer dimension shaft washerr 1,2 | min. 4 mm | — | — |
| Logistics | |||
| Product net weight | 27.1 kg | — | — |
| eClass code | 23-05-11-03 | — | — |
| UNSPSC code | 31171507 | — | — |
| Main Dimensions & Performance Data | |||
| Basic dynamic load rating, axialCa | — | 2,000,000 N | — |
| Basic dynamic load rating, axialCa | — | 449,640.288 lbf | — |
| Basic static load rating, axialC0a | — | 5,300,000 N | — |
| Basic static load rating, axialC0a | — | 1,191,546.763 lbf | — |
| Fatigue load limit, axialCua | — | 560,000 N | — |
| Fatigue load limit, axialCua | — | 125,899.281 lbf | — |
| Manufacturer Identity | |||
| Schaeffler Product Code | — | 396680 | — |
| Official Class Key | — | — | 080-000-000 |
| Base Type | — | 29430 | — |
| Old Designation | — | ["29430-E1"] | — |
| Gpsd Group | — | F02 | — |
| Product Line Id | — | 37 | — |
| X Life Marking | — | XL | — |
| SAP material number | — | 0390004780000 | — |
| Base product | — | 2305110302 | — |
| Bearing X designation | — | 29430-E1-XL | — |
| Mounting Manager ID | — | 29430-E1-XL | — |
| Mounting dimensions | |||
| Minimum diameter shaft shoulderda min | — | 220 mm | — |
| Minimum diameter shaft shoulderda min | — | 8.661 in | — |
| Maximum diameter of housing shoulderDa max | — | 253 mm | — |
| Maximum diameter of housing shoulderDa max | — | 9.961 in | — |
| Minimum bore diameter housingDb min | — | 306 mm | — |
| Minimum bore diameter housingDb min | — | 12.047 in | — |
| Maximum distance sleevedb max | — | 175 mm | — |
| Maximum distance sleevedb max | — | 6.89 in | — |
| Maximum champfer diameter of distance sleevedb1 max | — | 164 mm | — |
| Maximum champfer diameter of distance sleevedb1 max | — | 6.457 in | — |
| Maximum recess radiusra max | — | 3 mm | — |
| Maximum recess radiusra max | — | 0.118 in | — |
| Angle of champfer of the distance sleeve | — | 30 ° | — |
| Performance | |||
| SKF performance class | SKF Explorer | — | — |
| Product characteristics | |||
| Heat treatment | — | Standard | — |
| Locating feature, housing washer | None | Without | — |
| Handling thread holes | — | Without | — |
| Constricted width and inclination variation | — | Standard | — |
| Test certificate | — | Without | — |
| Product identity | |||
| Official product category | Spherical roller thrust bearings | — | — |
| Official taxonomy path | /products/rolling-bearings/roller-bearings/spherical-roller-thrust-bearings | — | — |
| Structure group ID | BHS_001 | — | — |
| Available from SKF | Yes | — | — |
| Remanufacturable | Yes | — | — |
| Product Identity | |||
| Construction | — | Axial spherical roller bearing 294..-E1-XL, no flanging ring | — |
| Short Description | — | Axial spherical roller bearing | — |
| Properties | |||
| Bore type | Cylindrical | — | — |
| Tolerance class | Normal | — | — |
| Candidate for remanufacturing | Yes | — | — |
| Indicative carbon footprint for new product | 100.0 kg CO 2 e | — | — |
| Indicative carbon footprint for remanufactured product | 33.4 kg CO 2 e | — | — |
| Technical Data | |||
| d | — | — | 300 mm |
| T | — | — | 90 mm |
| R(Min.) | — | — | 4 mm |
| Basic Load Ratings Ca | — | — | 1730 kN |
| Bore Diameter (D) | — | 150 mm | — |
| Basic Load Ratings C0A | — | — | 4620 kN |
| Outside Diameter (D) | — | 300 mm | — |
| Fatigue Load Limit : Cu | — | — | 334 kN |
| Height (T) | — | 90 mm | — |
| Limiting Speeds(Oil Lub.) | — | — | 1100 min-1 |
| Basic Dynamic Load Rating, Axial (Ca) | — | 2,000,000 N | — |
| D1 | — | — | 214 mm |
| Basic Static Load Rating, Axial (C0A) | — | 5,300,000 N | — |
| Operating Temperature Min. (Tmin) | — | -30 °C | — |
| B | — | — | 32 mm |
| Limiting Speed (Ng) | — | 2,290 1/min | — |
| B1 | — | — | 86 mm |
| Operating Temperature Max. (Tmax) | — | 200 °C | — |
| C | — | — | 44 mm |
| Reference Speed (Nϑr) | — | 1,180 1/min | — |
| A | — | — | 92 mm |
| Minimum Diameter Of Housing Shoulder (Db Min) | — | 306 mm | — |
| Da(Min.) | — | — | 220 mm |
| Bore Diameter Housing Washer (D1) | — | 207.5 mm | — |
| Da(Max.) | — | — | 250 mm |
| Height Of The Housing Washer (T1) | — | 43.4 mm | — |
| Ra(Max.) | — | — | 3 mm |
| Rip Diameter Shaft Washer (D1) | — | 267.4 mm | — |
| Mass(Refer.) | — | — | 29.6 kg |
| Angle Of Champfer Of The Distance Sleeve (Angle Of Cha) | — | 30 ° | — |
| Height Of The Shaft Washer (T3) | — | 58 mm | — |
| Distance Shaft Washer Cage (T5) | — | 80.5 mm | — |
| Maximum Champfer Diameter Of Distance Sleeve (Db1 Max) | — | 164 mm | — |
| Minimum Diameter Shaft Shoulder (Da Min) | — | 220 mm | — |
| Distance Of The Center Point (A) | — | 92 mm | — |
| Maximum Diameter Of Housing Shoulder (Da Max) | — | 253 mm | — |
| Maximum Distance Sleeve (Db Max) | — | 175 mm | — |
| Minimum Chamfer Dimension (Rmin) | — | 4 mm | — |
| Maximum Fillet Radius (Ra Max) | — | 3 mm | — |
| Fatigue Load Limit, Axial (Cua) | — | 560,000 N | — |
| Temperature range | |||
| Operating temperature min.Tmin | — | -30 °C | — |
| Operating temperature min.Tmin | — | -22 °F | — |
| Operating temperature max.Tmax | — | 200 °C | — |
| Operating temperature max.Tmax | — | 392 °F | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.