Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Cross Reference centre · Interchange verification checklist · Understand suffix differences
You entered 29414R. This table explores the base group 29414; it does not preserve or approve every requested suffix. Search your complete marking first →
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions differ
“29414” across 3 loaded brands
The base designation is shared, but the loaded boundary dimensions do not agree. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | SKF29414 E70 × 150 × mm | FAG29414-E1-XL70 × 150 × 48 mm | KOYO29414R70 × 150 × 17 mm |
|---|---|---|---|
| Comparable specifications | |||
| Brand | SKF | FAG | KOYO |
| Designation | 29414 E | 29414-E1-XL | 29414R |
| Product family | Spherical roller thrust bearings | — | — |
| Detailed type | Spherical roller thrust bearing with stamped steel cage | Axial spherical roller bearings | Axial spherical roller bearings |
| Series | — | 29414 | — |
| Bore diameterd | 70 mm | 70 mm | 70 mm |
| Outside diameterD | 150 mm | 150 mm | 150 mm |
| WidthB | — | 48 mm | 17 mm |
| HeightH | 48 mm | — | — |
| Basic dynamic load ratingC | 520 kN | — | — |
| Basic static load ratingC0 | 1250 kN | — | — |
| Fatigue load limitPu | 153 kN | — | 105 kN |
| Reference speednref | 2400 r/min | 2430 r/min | — |
| Limiting speednG | 4300 r/min | 5000 r/min | 2300 r/min |
| Mass≈m | 3.81 kg | 3.7 kg | 4.16 kg |
| Cage | Sheet metal | JP — Sheet metal cage | — |
| Minimum operating temperatureTmin | — | -30 °C | — |
| Maximum operating temperatureTmax | — | 200 °C | — |
| Capabilities & suitability | |||
| Radial load capacity | — | Yes | — |
| Axial load capacity in one direction | — | Yes | — |
| Suitable for grease lubrication | — | Yes | — |
| Suitable for oil lubrication | — | Yes | — |
| Unsealed design | — | Yes | — |
| Staticangularerrorandmisalignment | — | Yes | — |
| Dynamicangularerrorandmisalignment | — | Yes | — |
| Classification | |||
| Official Category Path | — | — | Spherical thrust roller bearings |
| Official Classification 1 | — | — | Spherical thrust roller bearings |
| Dimensions | |||
| Bore diameter housing washerD1 | — | 99 mm | — |
| Bore diameter housing washerD1 | — | 3.898 in | — |
| Rip diameter shaft washerd1 | — | 133.8 mm | — |
| Rip diameter shaft washerd1 | — | 5.268 in | — |
| Minimum chamfer dimensionrmin | — | 2 mm | — |
| Minimum chamfer dimensionrmin | — | 0.079 in | — |
| Height of the housing washerT1 | — | 23.8 mm | — |
| Height of the housing washerT1 | — | 0.937 in | — |
| Height of the shaft washerT3 | — | 31 mm | — |
| Height of the shaft washerT3 | — | 1.22 in | — |
| Distance shaft washer - cageT5 | — | 42.5 mm | — |
| Distance shaft washer - cageT5 | — | 1.673 in | — |
| Distance of the center pointA | — | 44.8 mm | — |
| Distance of the center pointA | — | 1.764 in | — |
| Engineering — Abutment dimensions | |||
| Diameter of shaft abutmentd a | min. 105 mm | — | — |
| Abutment diameter of spacer ringd b1 | max. 77.5 mm | — | — |
| Outside diameter of spacer ringd b2 | max. 77.5 mm | — | — |
| Diameter of housing abutmentD a | max. 125 mm | — | — |
| Fillet radiusr a | max. 2 mm | — | — |
| Engineering — Calculation data | |||
| Minimum axial load factorA | 0.15 | — | — |
| Engineering — Dimensions | |||
| Outside diameter of shaft washer end side faced 1 | ≈ 129 mm | — | — |
| Shoulder diameter outer ringD 1 | ≈ 99 mm | — | — |
| Width shaft washer or length of shaft washer bore diameter that fits on shaft (bearings with a stamped steel cage)B | 31 mm | — | — |
| Height shaft washer + cageB 1 | 41 mm | — | — |
| Height housing washerC | 23.8 mm | — | — |
| Distance from shaft washer end side face to pressure points | 44.8 mm | — | — |
| Chamfer dimension shaft washerr 1,2 | min. 2 mm | — | — |
| Logistics | |||
| Product net weight | 3.81 kg | — | — |
| eClass code | 23-05-11-03 | — | — |
| UNSPSC code | 31171507 | — | — |
| Main Dimensions & Performance Data | |||
| Basic dynamic load rating, axialCa | — | 550,000 N | — |
| Basic dynamic load rating, axialCa | — | 123,651.079 lbf | — |
| Basic static load rating, axialC0a | — | 1,290,000 N | — |
| Basic static load rating, axialC0a | — | 290,017.986 lbf | — |
| Fatigue load limit, axialCua | — | 154,000 N | — |
| Fatigue load limit, axialCua | — | 34,622.302 lbf | — |
| Manufacturer Identity | |||
| Schaeffler Product Code | — | 396650 | — |
| Official Class Key | — | — | 080-000-000 |
| Base Type | — | 29414 | — |
| Old Designation | — | ["29414-E1"] | — |
| Gpsd Group | — | F02 | — |
| Product Line Id | — | 37 | — |
| X Life Marking | — | XL | — |
| SAP material number | — | 0390002900000 | — |
| Base product | — | 2305110302 | — |
| Bearing X designation | — | 29414-E1-XL | — |
| Mounting Manager ID | — | 29414-E1-XL | — |
| Mounting dimensions | |||
| Minimum diameter shaft shoulderda min | — | 110 mm | — |
| Minimum diameter shaft shoulderda min | — | 4.331 in | — |
| Maximum diameter of housing shoulderDa max | — | 124 mm | — |
| Maximum diameter of housing shoulderDa max | — | 4.882 in | — |
| Minimum bore diameter housingDb min | — | 153 mm | — |
| Minimum bore diameter housingDb min | — | 6.024 in | — |
| Maximum distance sleevedb max | — | 78.5 mm | — |
| Maximum distance sleevedb max | — | 3.091 in | — |
| Maximum recess radiusra max | — | 2 mm | — |
| Maximum recess radiusra max | — | 0.079 in | — |
| Performance | |||
| SKF performance class | SKF Explorer | — | — |
| Product characteristics | |||
| Heat treatment | — | Standard | — |
| Locating feature, housing washer | None | Without | — |
| Handling thread holes | — | Without | — |
| Constricted width and inclination variation | — | Standard | — |
| Test certificate | — | Without | — |
| Product identity | |||
| Official product category | Spherical roller thrust bearings | — | — |
| Official taxonomy path | /products/rolling-bearings/roller-bearings/spherical-roller-thrust-bearings | — | — |
| Structure group ID | BHS_001 | — | — |
| Available from SKF | Yes | — | — |
| Remanufacturable | No | — | — |
| Product Identity | |||
| Construction | — | Axial spherical roller bearing 294..-E1-XL, no flanging ring | — |
| Short Description | — | Axial spherical roller bearing | — |
| Properties | |||
| Bore type | Cylindrical | — | — |
| Tolerance class | Normal | — | — |
| Indicative carbon footprint for new product | 14.1 kg CO 2 e | — | — |
| Technical Data | |||
| d | — | — | 150 mm |
| T | — | — | 48 mm |
| R(Min.) | — | — | 2 mm |
| Basic Load Ratings Ca | — | — | 485 kN |
| Bore Diameter (D) | — | 70 mm | — |
| Basic Load Ratings C0A | — | — | 1100 kN |
| Outside Diameter (D) | — | 150 mm | — |
| Fatigue Load Limit : Cu | — | — | 105 kN |
| Height (T) | — | 48 mm | — |
| Limiting Speeds(Oil Lub.) | — | — | 2300 min-1 |
| Basic Dynamic Load Rating, Axial (Ca) | — | 550,000 N | — |
| D1 | — | — | 103 mm |
| Basic Static Load Rating, Axial (C0A) | — | 1,290,000 N | — |
| Operating Temperature Min. (Tmin) | — | -30 °C | — |
| B | — | — | 17 mm |
| Limiting Speed (Ng) | — | 5,000 1/min | — |
| B1 | — | — | 45.5 mm |
| Operating Temperature Max. (Tmax) | — | 200 °C | — |
| C | — | — | 23 mm |
| Reference Speed (Nϑr) | — | 2,430 1/min | — |
| A | — | — | 44 mm |
| Minimum Diameter Of Housing Shoulder (Db Min) | — | 153 mm | — |
| Da(Min.) | — | — | 105 mm |
| Bore Diameter Housing Washer (D1) | — | 99 mm | — |
| Da(Max.) | — | — | 125 mm |
| Height Of The Housing Washer (T1) | — | 23.8 mm | — |
| Ra(Max.) | — | — | 2 mm |
| Rip Diameter Shaft Washer (D1) | — | 133.8 mm | — |
| Mass(Refer.) | — | — | 4.16 kg |
| Height Of The Shaft Washer (T3) | — | 31 mm | — |
| Distance Shaft Washer Cage (T5) | — | 42.5 mm | — |
| Minimum Diameter Shaft Shoulder (Da Min) | — | 110 mm | — |
| Distance Of The Center Point (A) | — | 44.8 mm | — |
| Maximum Diameter Of Housing Shoulder (Da Max) | — | 124 mm | — |
| Maximum Distance Sleeve (Db Max) | — | 78.5 mm | — |
| Minimum Chamfer Dimension (Rmin) | — | 2 mm | — |
| Maximum Fillet Radius (Ra Max) | — | 2 mm | — |
| Fatigue Load Limit, Axial (Cua) | — | 154,000 N | — |
| Temperature range | |||
| Operating temperature min.Tmin | — | -30 °C | — |
| Operating temperature min.Tmin | — | -22 °F | — |
| Operating temperature max.Tmax | — | 200 °C | — |
| Operating temperature max.Tmax | — | 392 °F | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.