Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions differ
“294” across 3 loaded brands
The base designation is shared, but the loaded boundary dimensions do not agree. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | SKF294/500 EM500 × 870 × mm | FAG294/750-E1-MB750 × 1280 × 315 mm | KOYO294/500R500 × 870 × 81 mm |
|---|---|---|---|
| Comparable specifications | |||
| Brand | SKF | FAG | KOYO |
| Designation | 294/500 EM | 294/750-E1-MB | 294/500R |
| Product family | Spherical roller thrust bearings | — | — |
| Detailed type | Spherical roller thrust bearing with machined metal cage | Axial spherical roller bearings | Axial spherical roller bearings |
| Series | — | 294/750 | — |
| Bore diameterd | 500 mm | 750 mm | 500 mm |
| Outside diameterD | 870 mm | 1280 mm | 870 mm |
| WidthB | — | 315 mm | 81 mm |
| HeightH | 224 mm | — | — |
| Basic dynamic load ratingC | 9370 kN | — | — |
| Basic static load ratingC0 | 40000 kN | — | — |
| Fatigue load limitPu | 2850 kN | — | 2120 kN |
| Reference speednref | 340 r/min | 206 r/min | — |
| Limiting speednG | 670 r/min | 455 r/min | 270 r/min |
| Mass≈m | 560 kg | 1648.7 kg | 562 kg |
| Cage | Machined brass | MB — Solid brass cage | — |
| Minimum operating temperatureTmin | — | -30 °C | — |
| Maximum operating temperatureTmax | — | 200 °C | — |
| Capabilities & suitability | |||
| Radial load capacity | — | Yes | — |
| Axial load capacity in one direction | — | Yes | — |
| Suitable for grease lubrication | — | Yes | — |
| Suitable for oil lubrication | — | Yes | — |
| Unsealed design | — | Yes | — |
| Largebearing | — | Yes | — |
| Staticangularerrorandmisalignment | — | Yes | — |
| Dynamicangularerrorandmisalignment | — | Yes | — |
| Classification | |||
| Official Category Path | — | — | Spherical thrust roller bearings |
| Official Classification 1 | — | — | Spherical thrust roller bearings |
| Dimensions | |||
| Bore diameter housing washerD1 | — | 964 mm | — |
| Bore diameter housing washerD1 | — | 37.953 in | — |
| Rip diameter shaft washerd1 | — | 1,180 mm | — |
| Rip diameter shaft washerd1 | — | 46.457 in | — |
| Minimum chamfer dimensionrmin | — | 15 mm | — |
| Minimum chamfer dimensionrmin | — | 0.591 in | — |
| Height of the housing washerT1 | — | 153 mm | — |
| Height of the housing washerT1 | — | 6.024 in | — |
| Height of shaft washerT2 | — | 121 mm | — |
| Height of shaft washerT2 | — | 4.764 in | — |
| Height of the shaft washerT3 | — | 210 mm | — |
| Height of the shaft washerT3 | — | 8.268 in | — |
| Height of shaft washer, inc. lip ringT4 | — | 305 mm | — |
| Height of shaft washer, inc. lip ringT4 | — | 12.008 in | — |
| Distance of the center pointA | — | 436 mm | — |
| Distance of the center pointA | — | 17.165 in | — |
| Engineering — Abutment dimensions | |||
| Diameter of shaft abutmentd a | min. 685 mm | — | — |
| Diameter of housing abutmentD a | max. 755 mm | — | — |
| Fillet radiusr a | max. 8 mm | — | — |
| Engineering — Calculation data | |||
| Minimum axial load factorA | 150 | — | — |
| Engineering — Dimensions | |||
| Outside diameter of shaft washer end side faced 1 | ≈ 795 mm | — | — |
| Shoulder diameter outer ringD 1 | ≈ 648 mm | — | — |
| Width shaft washer or length of shaft washer bore diameter that fits on shaft (bearings with a machined cage)B | 86 mm | — | — |
| Height shaft washer + cageB 1 | 216 mm | — | — |
| Height housing washerC | 110 mm | — | — |
| Distance from shaft washer end side face to pressure points | 290 mm | — | — |
| Chamfer dimension shaft washerr 1,2 | min. 9.5 mm | — | — |
| Logistics | |||
| Product net weight | 560.0 kg | — | — |
| eClass code | 23-05-09-11 | — | — |
| UNSPSC code | 31171507 | — | — |
| Main Dimensions & Performance Data | |||
| Section heightT | — | 315 mm | — |
| Section heightT | — | 12.402 in | — |
| Basic dynamic load rating, axialCa | — | 19,000,000 N | — |
| Basic dynamic load rating, axialCa | — | 4,271,582.734 lbf | — |
| Basic static load rating, axialC0a | — | 84,000,000 N | — |
| Basic static load rating, axialC0a | — | 18,884,892.086 lbf | — |
| Fatigue load limit, axialCua | — | 6,700,000 N | — |
| Fatigue load limit, axialCua | — | 1,506,294.964 lbf | — |
| Manufacturer Identity | |||
| Schaeffler Product Code | — | 1209199 | — |
| Official Class Key | — | — | 080-000-000 |
| Base Type | — | 294/750 | — |
| Gpsd Group | — | F03 | — |
| Product Line Id | — | 78 | — |
| X Life Marking | — | n.r. | — |
| SAP material number | — | 0390002220000 | — |
| Base product | — | 2305110301 | — |
| Bearing X designation | — | 294/750-E1-MB | — |
| Mounting Manager ID | — | 294/750-E1-MB | — |
| Mounting dimensions | |||
| Minimum diameter shaft shoulderda min | — | 1,015 mm | — |
| Minimum diameter shaft shoulderda min | — | 39.961 in | — |
| Maximum diameter of housing shoulderDa max | — | 1,130 mm | — |
| Maximum diameter of housing shoulderDa max | — | 44.488 in | — |
| Minimum bore diameter housingDb min | — | 1,310 mm | — |
| Minimum bore diameter housingDb min | — | 51.575 in | — |
| Maximum distance sleevedb max | — | 811 mm | — |
| Maximum distance sleevedb max | — | 31.929 in | — |
| Maximum recess radiusra max | — | 12 mm | — |
| Maximum recess radiusra max | — | 0.472 in | — |
| Product characteristics | |||
| Heat treatment | — | Standard | — |
| Constricted width and inclination variation | — | Standard | — |
| Product identity | |||
| Official product category | Spherical roller thrust bearings | — | — |
| Official taxonomy path | /products/rolling-bearings/roller-bearings/spherical-roller-thrust-bearings | — | — |
| Structure group ID | BHS_001 | — | — |
| Available from SKF | Yes | — | — |
| Remanufacturable | Yes | — | — |
| Product Identity | |||
| Construction | — | Axial spherical roller bearings 294..-E1, main dimensions to DIN 728/ISO 104, single direction, separable | — |
| Short Description | — | Axial spherical roller bearing | — |
| Properties | |||
| Locating feature, housing washer | None | — | — |
| Bore type | Cylindrical | — | — |
| Tolerance class | Normal | — | — |
| Candidate for remanufacturing | Yes | — | — |
| Indicative carbon footprint for new product | 2072.0 kg CO 2 e | — | — |
| Indicative carbon footprint for remanufactured product | 689.0 kg CO 2 e | — | — |
| Technical Data | |||
| d | — | — | 870 mm |
| T | — | — | 224 mm |
| R(Min.) | — | — | 9.5 mm |
| Bore Diameter (D) | — | 750 mm | — |
| Basic Load Ratings Ca | — | — | 10800 kN |
| Outside Diameter (D) | — | 1,280 mm | — |
| Basic Load Ratings C0A | — | — | 36400 kN |
| Height (T) | — | 315 mm | — |
| Fatigue Load Limit : Cu | — | — | 2120 kN |
| Basic Dynamic Load Rating, Axial (Ca) | — | 19,000,000 N | — |
| Limiting Speeds(Oil Lub.) | — | — | 270 min-1 |
| Basic Static Load Rating, Axial (C0A) | — | 84,000,000 N | — |
| D1 | — | — | 661 mm |
| Operating Temperature Min. (Tmin) | — | -30 °C | — |
| Limiting Speed (Ng) | — | 455 1/min | — |
| B | — | — | 81 mm |
| Operating Temperature Max. (Tmax) | — | 200 °C | — |
| B1 | — | — | 216 mm |
| Reference Speed (Nϑr) | — | 206 1/min | — |
| C | — | — | 107 mm |
| Minimum Diameter Of Housing Shoulder (Db Min) | — | 1,310 mm | — |
| A | — | — | 290 mm |
| Bore Diameter Housing Washer (D1) | — | 964 mm | — |
| Da(Min.) | — | — | 670 mm |
| Height Of Shaft Washer (T2) | — | 121 mm | — |
| Da(Max.) | — | — | 750 mm |
| Height Of The Housing Washer (T1) | — | 153 mm | — |
| Ra(Max.) | — | — | 8 mm |
| Rip Diameter Shaft Washer (D1) | — | 1,180 mm | — |
| Mass(Refer.) | — | — | 562 kg |
| Height Of The Shaft Washer (T3) | — | 210 mm | — |
| Minimum Diameter Shaft Shoulder (Da Min) | — | 1,015 mm | — |
| Distance Of The Center Point (A) | — | 436 mm | — |
| Height Of Shaft Washer, Inc. Lip Ring (T4) | — | 305 mm | — |
| Maximum Diameter Of Housing Shoulder (Da Max) | — | 1,130 mm | — |
| Maximum Distance Sleeve (Db Max) | — | 811 mm | — |
| Minimum Chamfer Dimension (Rmin) | — | 15 mm | — |
| Maximum Fillet Radius (Ra Max) | — | 12 mm | — |
| Fatigue Load Limit, Axial (Cua) | — | 6,700,000 N | — |
| Temperature range | |||
| Operating temperature min.Tmin | — | -30 °C | — |
| Operating temperature min.Tmin | — | -22 °F | — |
| Operating temperature max.Tmax | — | 200 °C | — |
| Operating temperature max.Tmax | — | 392 °F | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.