Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions differ
“29392” across 3 loaded brands
The base designation is shared, but the loaded boundary dimensions do not agree. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | SKF29392460 × 710 × mm | FAG29392-E1-XL-MB460 × 710 × 150 mm | KOYO29392460 × 710 × 51 mm |
|---|---|---|---|
| Comparable specifications | |||
| Brand | SKF | FAG | KOYO |
| Designation | 29392 | 29392-E1-XL-MB | 29392 |
| Product family | Spherical roller thrust bearings | — | — |
| Detailed type | Spherical roller thrust bearing with machined metal cage | Axial spherical roller bearings | Axial spherical roller bearings |
| Series | — | 29392 | — |
| Bore diameterd | 460 mm | 460 mm | 460 mm |
| Outside diameterD | 710 mm | 710 mm | 710 mm |
| WidthB | — | 150 mm | 51 mm |
| HeightH | 150 mm | — | — |
| Basic dynamic load ratingC | 4310 kN | — | — |
| Basic static load ratingC0 | 19000 kN | — | — |
| Fatigue load limitPu | 1500 kN | — | 875 kN |
| Reference speednref | 450 r/min | 430 r/min | — |
| Limiting speednG | 800 r/min | 850 r/min | 400 r/min |
| Mass≈m | 215 kg | 208.5 kg | 216 kg |
| Cage | Machined brass | MB — Solid brass cage | — |
| Minimum operating temperatureTmin | — | -30 °C | — |
| Maximum operating temperatureTmax | — | 200 °C | — |
| Capabilities & suitability | |||
| Radial load capacity | — | Yes | — |
| Axial load capacity in one direction | — | Yes | — |
| Suitable for grease lubrication | — | Yes | — |
| Suitable for oil lubrication | — | Yes | — |
| Unsealed design | — | Yes | — |
| Largebearing | — | Yes | — |
| Staticangularerrorandmisalignment | — | Yes | — |
| Dynamicangularerrorandmisalignment | — | Yes | — |
| Classification | |||
| Official Category Path | — | — | Spherical thrust roller bearings |
| Official Classification 1 | — | — | Spherical thrust roller bearings |
| Dimensions | |||
| Bore diameter housing washerD1 | — | 567 mm | — |
| Bore diameter housing washerD1 | — | 22.323 in | — |
| Rip diameter shaft washerd1 | — | 660 mm | — |
| Rip diameter shaft washerd1 | — | 25.984 in | — |
| Minimum chamfer dimensionrmin | — | 6 mm | — |
| Minimum chamfer dimensionrmin | — | 0.236 in | — |
| Height of the housing washerT1 | — | 72.5 mm | — |
| Height of the housing washerT1 | — | 2.854 in | — |
| Height of shaft washerT2 | — | 54 mm | — |
| Height of shaft washerT2 | — | 2.126 in | — |
| Height of the shaft washerT3 | — | 94.5 mm | — |
| Height of the shaft washerT3 | — | 3.72 in | — |
| Height of shaft washer, inc. lip ringT4 | — | 144 mm | — |
| Height of shaft washer, inc. lip ringT4 | — | 5.669 in | — |
| Distance of the center pointA | — | 257 mm | — |
| Distance of the center pointA | — | 10.118 in | — |
| Engineering — Abutment dimensions | |||
| Diameter of shaft abutmentd a | min. 585 mm | — | — |
| Diameter of housing abutmentD a | max. 630 mm | — | — |
| Fillet radiusr a | max. 5 mm | — | — |
| Engineering — Calculation data | |||
| Minimum axial load factorA | 34 | — | — |
| Engineering — Dimensions | |||
| Outside diameter of shaft washer end side faced 1 | ≈ 685 mm | — | — |
| Shoulder diameter outer ringD 1 | ≈ 567 mm | — | — |
| Width shaft washer or length of shaft washer bore diameter that fits on shaft (bearings with a machined cage)B | 50 mm | — | — |
| Height shaft washer + cageB 1 | 144 mm | — | — |
| Height housing washerC | 72.5 mm | — | — |
| Distance from shaft washer end side face to pressure points | 257 mm | — | — |
| Chamfer dimension shaft washerr 1,2 | min. 6 mm | — | — |
| Logistics | |||
| Product net weight | 215.0 kg | — | — |
| eClass code | 23-05-09-11 | — | — |
| UNSPSC code | 31171507 | — | — |
| Main Dimensions & Performance Data | |||
| Section heightT | — | 150 mm | — |
| Section heightT | — | 5.906 in | — |
| Basic dynamic load rating, axialCa | — | 5,900,000 N | — |
| Basic dynamic load rating, axialCa | — | 1,326,438.849 lbf | — |
| Basic static load rating, axialC0a | — | 21,400,000 N | — |
| Basic static load rating, axialC0a | — | 4,811,151.079 lbf | — |
| Fatigue load limit, axialCua | — | 2,160,000 N | — |
| Fatigue load limit, axialCua | — | 485,611.511 lbf | — |
| Manufacturer Identity | |||
| Schaeffler Product Code | — | 396514 | — |
| Official Class Key | — | — | 080-000-000 |
| Base Type | — | 29392 | — |
| Old Designation | — | ["29392-E1-MB"] | — |
| Gpsd Group | — | F03 | — |
| Product Line Id | — | 78 | — |
| X Life Marking | — | XL | — |
| SAP material number | — | 0390001170000 | — |
| Base product | — | 2305110301 | — |
| Bearing X designation | — | 29392-E1-XL-MB | — |
| Mounting Manager ID | — | 29392-E1-XL-MB | — |
| Mounting dimensions | |||
| Minimum diameter shaft shoulderda min | — | 585 mm | — |
| Minimum diameter shaft shoulderda min | — | 23.031 in | — |
| Maximum diameter of housing shoulderDa max | — | 638 mm | — |
| Maximum diameter of housing shoulderDa max | — | 25.118 in | — |
| Minimum bore diameter housingDb min | — | 726 mm | — |
| Minimum bore diameter housingDb min | — | 28.583 in | — |
| Maximum distance sleevedb max | — | 491 mm | — |
| Maximum distance sleevedb max | — | 19.331 in | — |
| Maximum recess radiusra max | — | 5 mm | — |
| Maximum recess radiusra max | — | 0.197 in | — |
| Product characteristics | |||
| Heat treatment | — | Standard | — |
| Locating feature, housing washer | None | Without | — |
| Handling thread holes | — | Without | — |
| Constricted width and inclination variation | — | Standard | — |
| Test certificate | — | Without | — |
| Product identity | |||
| Official product category | Spherical roller thrust bearings | — | — |
| Official taxonomy path | /products/rolling-bearings/roller-bearings/spherical-roller-thrust-bearings | — | — |
| Structure group ID | BHS_001 | — | — |
| Available from SKF | Yes | — | — |
| Remanufacturable | Yes | — | — |
| Product Identity | |||
| Construction | — | Axial spherical roller bearing 293..-E1-XL-MB, with flanging ring | — |
| Short Description | — | Axial spherical roller bearing | — |
| Properties | |||
| Bore type | Cylindrical | — | — |
| Tolerance class | Normal | — | — |
| Candidate for remanufacturing | Yes | — | — |
| Indicative carbon footprint for new product | 796.0 kg CO 2 e | — | — |
| Indicative carbon footprint for remanufactured product | 264.0 kg CO 2 e | — | — |
| Technical Data | |||
| d | — | — | 710 mm |
| T | — | — | 150 mm |
| R(Min.) | — | — | 6 mm |
| Basic Load Ratings Ca | — | — | 4580 kN |
| Bore Diameter (D) | — | 460 mm | — |
| Basic Load Ratings C0A | — | — | 15800 kN |
| Outside Diameter (D) | — | 710 mm | — |
| Fatigue Load Limit : Cu | — | — | 875 kN |
| Height (T) | — | 150 mm | — |
| Limiting Speeds(Oil Lub.) | — | — | 400 min-1 |
| Basic Dynamic Load Rating, Axial (Ca) | — | 5,900,000 N | — |
| D1 | — | — | 567 mm |
| Basic Static Load Rating, Axial (C0A) | — | 21,400,000 N | — |
| Operating Temperature Min. (Tmin) | — | -30 °C | — |
| B | — | — | 51 mm |
| Limiting Speed (Ng) | — | 850 1/min | — |
| B1 | — | — | 144 mm |
| Operating Temperature Max. (Tmax) | — | 200 °C | — |
| C | — | — | 72 mm |
| Reference Speed (Nϑr) | — | 430 1/min | — |
| A | — | — | 257 mm |
| Minimum Diameter Of Housing Shoulder (Db Min) | — | 726 mm | — |
| Da(Min.) | — | — | 575 mm |
| Bore Diameter Housing Washer (D1) | — | 567 mm | — |
| Da(Max.) | — | — | 630 mm |
| Height Of Shaft Washer (T2) | — | 54 mm | — |
| Ra(Max.) | — | — | 5 mm |
| Height Of The Housing Washer (T1) | — | 72.5 mm | — |
| Mass(Refer.) | — | — | 216 kg |
| Rip Diameter Shaft Washer (D1) | — | 660 mm | — |
| Height Of The Shaft Washer (T3) | — | 94.5 mm | — |
| Minimum Diameter Shaft Shoulder (Da Min) | — | 585 mm | — |
| Distance Of The Center Point (A) | — | 257 mm | — |
| Height Of Shaft Washer, Inc. Lip Ring (T4) | — | 144 mm | — |
| Maximum Diameter Of Housing Shoulder (Da Max) | — | 638 mm | — |
| Maximum Distance Sleeve (Db Max) | — | 491 mm | — |
| Minimum Chamfer Dimension (Rmin) | — | 6 mm | — |
| Maximum Fillet Radius (Ra Max) | — | 5 mm | — |
| Fatigue Load Limit, Axial (Cua) | — | 2,160,000 N | — |
| Temperature range | |||
| Operating temperature min.Tmin | — | -30 °C | — |
| Operating temperature min.Tmin | — | -22 °F | — |
| Operating temperature max.Tmax | — | 200 °C | — |
| Operating temperature max.Tmax | — | 392 °F | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.