Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions differ
“29384” across 3 loaded brands
The base designation is shared, but the loaded boundary dimensions do not agree. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | SKF29384420 × 650 × mm | FAG29384-E1-XL-MB420 × 650 × 140 mm | KOYO29384R420 × 650 × 48 mm |
|---|---|---|---|
| Comparable specifications | |||
| Brand | SKF | FAG | KOYO |
| Designation | 29384 | 29384-E1-XL-MB | 29384R |
| Product family | Spherical roller thrust bearings | — | — |
| Detailed type | Spherical roller thrust bearing with machined metal cage | Axial spherical roller bearings | Axial spherical roller bearings |
| Series | — | 29384 | — |
| Bore diameterd | 420 mm | 420 mm | 420 mm |
| Outside diameterD | 650 mm | 650 mm | 650 mm |
| WidthB | — | 140 mm | 48 mm |
| HeightH | 140 mm | — | — |
| Basic dynamic load ratingC | 3740 kN | — | — |
| Basic static load ratingC0 | 16000 kN | — | — |
| Fatigue load limitPu | 1290 kN | — | 1160 kN |
| Reference speednref | 500 r/min | 480 r/min | — |
| Limiting speednG | 900 r/min | 940 r/min | 450 r/min |
| Mass≈m | 170 kg | 162.5 kg | 169 kg |
| Cage | Machined brass | MB — Solid brass cage | — |
| Minimum operating temperatureTmin | — | -30 °C | — |
| Maximum operating temperatureTmax | — | 200 °C | — |
| Capabilities & suitability | |||
| Radial load capacity | — | Yes | — |
| Axial load capacity in one direction | — | Yes | — |
| Suitable for grease lubrication | — | Yes | — |
| Suitable for oil lubrication | — | Yes | — |
| Unsealed design | — | Yes | — |
| Largebearing | — | Yes | — |
| Staticangularerrorandmisalignment | — | Yes | — |
| Dynamicangularerrorandmisalignment | — | Yes | — |
| Classification | |||
| Official Category Path | — | — | Spherical thrust roller bearings |
| Official Classification 1 | — | — | Spherical thrust roller bearings |
| Dimensions | |||
| Bore diameter housing washerD1 | — | 520 mm | — |
| Bore diameter housing washerD1 | — | 20.472 in | — |
| Rip diameter shaft washerd1 | — | 600 mm | — |
| Rip diameter shaft washerd1 | — | 23.622 in | — |
| Minimum chamfer dimensionrmin | — | 6 mm | — |
| Minimum chamfer dimensionrmin | — | 0.236 in | — |
| Height of the housing washerT1 | — | 67.5 mm | — |
| Height of the housing washerT1 | — | 2.657 in | — |
| Height of shaft washerT2 | — | 50 mm | — |
| Height of shaft washerT2 | — | 1.969 in | — |
| Height of the shaft washerT3 | — | 85 mm | — |
| Height of the shaft washerT3 | — | 3.346 in | — |
| Height of shaft washer, inc. lip ringT4 | — | 135 mm | — |
| Height of shaft washer, inc. lip ringT4 | — | 5.315 in | — |
| Distance of the center pointA | — | 235 mm | — |
| Distance of the center pointA | — | 9.252 in | — |
| Engineering — Abutment dimensions | |||
| Diameter of shaft abutmentd a | min. 535 mm | — | — |
| Diameter of housing abutmentD a | max. 580 mm | — | — |
| Fillet radiusr a | max. 5 mm | — | — |
| Engineering — Calculation data | |||
| Minimum axial load factorA | 24 | — | — |
| Engineering — Dimensions | |||
| Outside diameter of shaft washer end side faced 1 | ≈ 626 mm | — | — |
| Shoulder diameter outer ringD 1 | ≈ 520 mm | — | — |
| Width shaft washer or length of shaft washer bore diameter that fits on shaft (bearings with a machined cage)B | 49 mm | — | — |
| Height shaft washer + cageB 1 | 135 mm | — | — |
| Height housing washerC | 67.5 mm | — | — |
| Distance from shaft washer end side face to pressure points | 235 mm | — | — |
| Chamfer dimension shaft washerr 1,2 | min. 6 mm | — | — |
| Logistics | |||
| Product net weight | 170.0 kg | — | — |
| eClass code | 23-05-09-11 | — | — |
| UNSPSC code | 31171507 | — | — |
| Main Dimensions & Performance Data | |||
| Section heightT | — | 140 mm | — |
| Section heightT | — | 5.512 in | — |
| Basic dynamic load rating, axialCa | — | 5,000,000 N | — |
| Basic dynamic load rating, axialCa | — | 1,124,100.719 lbf | — |
| Basic static load rating, axialC0a | — | 17,500,000 N | — |
| Basic static load rating, axialC0a | — | 3,934,352.518 lbf | — |
| Fatigue load limit, axialCua | — | 1,850,000 N | — |
| Fatigue load limit, axialCua | — | 415,917.266 lbf | — |
| Manufacturer Identity | |||
| Schaeffler Product Code | — | 396510 | — |
| Official Class Key | — | — | 080-000-000 |
| Base Type | — | 29384 | — |
| Old Designation | — | ["29384-E1-MB"] | — |
| Gpsd Group | — | F03 | — |
| Product Line Id | — | 78 | — |
| X Life Marking | — | XL | — |
| SAP material number | — | 0390000950000 | — |
| Base product | — | 2305110301 | — |
| Bearing X designation | — | 29384-E1-XL-MB | — |
| Mounting Manager ID | — | 29384-E1-XL-MB | — |
| Mounting dimensions | |||
| Minimum diameter shaft shoulderda min | — | 530 mm | — |
| Minimum diameter shaft shoulderda min | — | 20.866 in | — |
| Maximum diameter of housing shoulderDa max | — | 585 mm | — |
| Maximum diameter of housing shoulderDa max | — | 23.031 in | — |
| Minimum bore diameter housingDb min | — | 664 mm | — |
| Minimum bore diameter housingDb min | — | 26.142 in | — |
| Maximum distance sleevedb max | — | 449 mm | — |
| Maximum distance sleevedb max | — | 17.677 in | — |
| Maximum recess radiusra max | — | 5 mm | — |
| Maximum recess radiusra max | — | 0.197 in | — |
| Product characteristics | |||
| Heat treatment | — | Standard | — |
| Locating feature, housing washer | None | Without | — |
| Handling thread holes | — | Without | — |
| Constricted width and inclination variation | — | Standard | — |
| Test certificate | — | Without | — |
| Product identity | |||
| Official product category | Spherical roller thrust bearings | — | — |
| Official taxonomy path | /products/rolling-bearings/roller-bearings/spherical-roller-thrust-bearings | — | — |
| Structure group ID | BHS_001 | — | — |
| Available from SKF | Yes | — | — |
| Remanufacturable | Yes | — | — |
| Product Identity | |||
| Construction | — | Axial spherical roller bearing 293..-E1-XL-MB, with flanging ring | — |
| Short Description | — | Axial spherical roller bearing | — |
| Properties | |||
| Bore type | Cylindrical | — | — |
| Tolerance class | Normal | — | — |
| Candidate for remanufacturing | Yes | — | — |
| Indicative carbon footprint for new product | 629.0 kg CO 2 e | — | — |
| Indicative carbon footprint for remanufactured product | 209.0 kg CO 2 e | — | — |
| Technical Data | |||
| d | — | — | 650 mm |
| T | — | — | 140 mm |
| R(Min.) | — | — | 6 mm |
| Basic Load Ratings Ca | — | — | 5070 kN |
| Bore Diameter (D) | — | 420 mm | — |
| Basic Load Ratings C0A | — | — | 17700 kN |
| Outside Diameter (D) | — | 650 mm | — |
| Fatigue Load Limit : Cu | — | — | 1160 kN |
| Height (T) | — | 140 mm | — |
| Limiting Speeds(Oil Lub.) | — | — | 450 min-1 |
| Basic Dynamic Load Rating, Axial (Ca) | — | 5,000,000 N | — |
| D1 | — | — | 520 mm |
| Basic Static Load Rating, Axial (C0A) | — | 17,500,000 N | — |
| Operating Temperature Min. (Tmin) | — | -30 °C | — |
| B | — | — | 48 mm |
| Limiting Speed (Ng) | — | 940 1/min | — |
| B1 | — | — | 135 mm |
| Operating Temperature Max. (Tmax) | — | 200 °C | — |
| C | — | — | 68 mm |
| Reference Speed (Nϑr) | — | 480 1/min | — |
| A | — | — | 235 mm |
| Minimum Diameter Of Housing Shoulder (Db Min) | — | 664 mm | — |
| Da(Min.) | — | — | 525 mm |
| Bore Diameter Housing Washer (D1) | — | 520 mm | — |
| Da(Max.) | — | — | 575 mm |
| Height Of Shaft Washer (T2) | — | 50 mm | — |
| Ra(Max.) | — | — | 5 mm |
| Height Of The Housing Washer (T1) | — | 67.5 mm | — |
| Mass(Refer.) | — | — | 169 kg |
| Rip Diameter Shaft Washer (D1) | — | 600 mm | — |
| Height Of The Shaft Washer (T3) | — | 85 mm | — |
| Minimum Diameter Shaft Shoulder (Da Min) | — | 530 mm | — |
| Distance Of The Center Point (A) | — | 235 mm | — |
| Height Of Shaft Washer, Inc. Lip Ring (T4) | — | 135 mm | — |
| Maximum Diameter Of Housing Shoulder (Da Max) | — | 585 mm | — |
| Maximum Distance Sleeve (Db Max) | — | 449 mm | — |
| Minimum Chamfer Dimension (Rmin) | — | 6 mm | — |
| Maximum Fillet Radius (Ra Max) | — | 5 mm | — |
| Fatigue Load Limit, Axial (Cua) | — | 1,850,000 N | — |
| Temperature range | |||
| Operating temperature min.Tmin | — | -30 °C | — |
| Operating temperature min.Tmin | — | -22 °F | — |
| Operating temperature max.Tmax | — | 200 °C | — |
| Operating temperature max.Tmax | — | 392 °F | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.